3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRP112N331D-TR-FE
Ricoh Elec Devices · Linear Voltage Regulators (LDO) · SOT-23-5
RP112N331D-TR-FE from Ricoh Elec Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Input pin; the input voltage range is 2.0 V to 5.25 V, with an absolute maximum of 6.0 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | CE | input | Chip enable pin, active "H"; the datasheet gives the CE input threshold as VCEH 1.0 V max and VCEL 0.4 V, with an absolute maximum CE input voltage of 6.0 V. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Output pin; the rated output current is 150 mA, and VOUT is limited to −0.3 V to VIN + 0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Ricoh Elec Devices |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (Ta = 25°C) | VOUT | 3.267 | 3.3 | 3.333 | V | Ta = 25°C; RP112x33xx product-specific row | 7 |
| Output Voltage (−40°C ≤ Ta ≤ 85°C) | VOUT | 3.251 | 3.3 | 3.35 | V | −40°C ≤ Ta ≤ 85°C; RP112x33xx product-specific row | 7 |
| Load Regulation | ∆VOUT/∆IOUT | -14 | 0 | 14 | mV | 1 mA ≤ IOUT ≤ 150 mA | 5 |
| Dropout Voltage | VDIF | 0.2 | 0.28 | V | Ta = 25°C | 7 | |
| Supply Current | ISS | 75 | 100 | µA | IOUT = 0 mA, VOUT < 4.1 V | 5 | |
| Standby Current | Istandby | 0.1 | 1 | µA | VCE = 0 V | 5 | |
| Line Regulation | ∆VOUT/∆VIN | 0.02 | 0.1 | %/V | Set VOUT + 0.5 V ≤ VIN ≤ 5.0 V, 1.7 V ≤ VOUT < 4.1 V | 5 | |
| Ripple Rejection | RR | 80 | dB | Ripple 0.2 Vp-p, IOUT = 30 mA, VIN = Set VOUT + 1.0 V (VOUT < 4.1 V), f = 1 kHz | 5 | ||
| Ripple Rejection | RR | 75 | dB | Ripple 0.2 Vp-p, IOUT = 30 mA, VIN = Set VOUT + 1.0 V (VOUT < 4.1 V), f = 10 kHz | 5 | ||
| Ripple Rejection | RR | 65 | dB | Ripple 0.2 Vp-p, IOUT = 30 mA, VIN = Set VOUT + 1.0 V (VOUT < 4.1 V), f = 100 kHz | 5 | ||
| Input Voltage | VIN | 2 | 5.25 | V | 5 | ||
| Output Voltage Temperature Coefficient | ∆VOUT/∆Ta | -30 | 30 | ppm/°C | −40°C ≤ Ta ≤ 85°C | 5 | |
| Short Current Limit | ISC | 40 | mA | VOUT = 0 V | 5 | ||
| Output Current | IOUT | 150 | mA | 5 | |||
| CE Pull-down Current | IPD | 0.3 | 0.6 | µA | 5 | ||
| CE Input Voltage "H" | VCEH | 1 | V | 5 | |||
| CE Input Voltage "L" | VCEL | 0.4 | V | 5 | |||
| Output Noise | en | 10 | µVrms | BW = 10 Hz to 100 kHz, IOUT = 30 mA | 6 | ||
| Auto-discharge Nch Transistor ON Resistance (RP112xxxxD) | RLOW | 60 | Ω | VIN = 4.0 V, VCE = 0 V | 6 | ||
| Input Voltage (absolute maximum) | VIN | 6 | V | 4 | |||
| Input Voltage (CE pin, absolute maximum) | VCE | 6 | V | 4 | |||
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | Upper limit VIN + 0.3 V | 4 | ||
| Output Current (absolute maximum) | IOUT | 180 | mA | 4 | |||
| Power Dissipation (SOT-23-5) | PD | 660 | mW | JEDEC STD. 51-7 test land pattern | 4 | ||
| Junction Temperature Range | Tj | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | Tstg | -55 | 125 | °C | 4 | ||
| Input Voltage (recommended operating) | VIN | 2 | 5.25 | V | 4 | ||
| Operating Temperature | Ta | -40 | 85 | °C | 4 | ||
| Thermal Resistance Junction-to-Ambient (SOT-23-5) | θja | 150 | °C/W | Ta = 25°C, Tjmax = 125°C, JEDEC STD. 51-7 four-layer board | 27 | ||
| Thermal Characterization Parameter Junction-to-Top (SOT-23-5) | ψjt | 51 | °C/W | Ta = 25°C, Tjmax = 125°C, JEDEC STD. 51-7 four-layer board | 27 |
CAD (KiCad official)
- Symbol:
RP112N331D-TR-FE - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
rp112n331d-tr-fe-etched.step/rp112n331d-tr-fe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rp112n331d-tr-fe.step/rp112n331d-tr-fe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Ricoh Elec Devices datasheet (29 pp, sha256
e18c21a25bb403fb, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).