3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1643T-I
Microchip Tech · LED Drivers · MSOP-8
MCP1643T-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable pin: logic high (>75% of VIN) enables the regulator and logic low (<20% of VIN) disables it; do not allow this pin to float. |
| 2 | VFB | input | Reference voltage pin regulated to 120 mV across RSET; connect to the RSET LED current set resistor and the cathode of the LED load. |
| 3 | NC | unconnected | Unconnected pin. |
| 4 | VOUT | power_out | Boost converter output pin; connect the LED load anode here with a 4.7 to 20 µF X7R or X5R ceramic output filter capacitor. |
| 5 | SW | passive | Boost and rectifier switch node; connect the boost inductor between SW and VIN, carrying up to 1.6 A typical peak current. |
| 6 | PGND | power_in | Power ground reference pin, the return for the high-current N-Channel switch, connected externally to SGND. |
| 7 | SGND | power_in | Signal ground reference pin, the return for the VFB and error amplifier, connected externally to PGND. |
| 8 | VIN | power_in | Input supply voltage pin; requires a local bypass capacitor of 4.7 µF minimum decoupled to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Start-Up Voltage | VIN | 0.65 | 0.8 | V | Note 2, Note 1 | 3 | |
| Feedback Voltage | VFB | 105 | 120 | 135 | mV | 3 | |
| Switching Frequency | fSW | 0.85 | 1 | 1.15 | MHz | 3 | |
| EN Input Logic High | VIH | 75 | %of VIN | ILED= 25 mA | 3 | ||
| EN Input Logic Low | VIL | 20 | %of VIN | ILED = 25 mA | 3 | ||
| Absolute max voltage EN, FB, VIN, VSW, VOUT to GND | 6.5 | V | EN, FB, VIN, VSW, VOUT - GND | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient Temp. with Power Applied | -40 | 85 | °C | 3 | |||
| Operating Junction Temperature | -40 | 125 | °C | 3 | |||
| ESD Protection HBM | 4 | kV | All pins | 3 | |||
| ESD Protection MM | 300 | V | All pins | 3 | |||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | Steady State | 4 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 4 | ||
| Thermal Resistance, 8L-MSOP | θJA | 211 | °C/W | 4 | |||
| Minimum Input Voltage After Start-Up | VIN | 0.5 | V | Note 1, Note 3 | 3 | ||
| Output Overvoltage Protection | VOUT_OVP | 5 | V | Note 3 | 3 | ||
| Shutdown Quiescent Current | IQSHDN | 1.2 | µA | EN = GND; includes N-Channel and P-Channel Switch Leakage | 3 | ||
| NMOS Peak Switch Current Limit | IN(MAX) | 1.6 | A | Note 3 | 3 | ||
| NMOS Switch ON Resistance | RDS(ON)N | 0.2 | Ω | ILED = 250 mA, Note 3 | 3 | ||
| PMOS Switch ON Resistance | RDS(ON)P | 0.4 | Ω | ILED = 250 mA, Note 3 | 3 | ||
| Soft Start Time | tSS | 240 | µs | EN Low-to-High, 90% of VOUT; ILED = 25 mA, Note 3 | 4 | ||
| Thermal Shutdown Die Temperature | TSD | 150 | °C | ILED= 25 mA | 4 |
CAD (KiCad official)
- Symbol:
MCP1643T-I - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp1643t-i-etched.step/mcp1643t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1643t-i.step/mcp1643t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
238cade92314478e, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).