component
SN74LV573ADGVR
Public Made by Adomby adom
Texas Instruments Latches, TVSOP-20-4.4mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74LV573ADGVR
Texas Instruments · Latches · TVSOP-20-4.4mm
SN74LV573ADGVR from Texas Instruments, in a TVSOP-20-4.4mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output enable; when high, all eight Q outputs go to high-impedance (Z), and OE does not affect the internal latch operation. |
| 2 | 1D | input | Data input for latch 1; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE. |
| 3 | 2D | input | Data input for latch 2; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE. |
| 4 | 3D | input | Data input for latch 3; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE. |
| 5 | 4D | input | Data input for latch 4; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE. |
| 6 | 5D | input | Data input for latch 5; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE. |
| 7 | 6D | input | Data input for latch 6; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE. |
| 8 | 7D | input | Data input for latch 7; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE. |
| 9 | 8D | input | Data input for latch 8; the Q output follows D while LE is high, and D must meet the 3.5 ns setup and 1.5 ns hold times relative to the falling edge of LE. |
| 10 | GND | power_in | Ground reference pin; the total current through GND or VCC must not exceed ±70 mA. |
| 11 | LE | input | Latch enable input; when high the Q outputs follow D, and when taken low the Q outputs latch the logic levels present at D. |
| 12 | 8Q | output | 3-state latch output 8; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V. |
| 13 | 7Q | output | 3-state latch output 7; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V. |
| 14 | 6Q | output | 3-state latch output 6; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V. |
| 15 | 5Q | output | 3-state latch output 5; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V. |
| 16 | 4Q | output | 3-state latch output 4; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V. |
| 17 | 3Q | output | 3-state latch output 3; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V. |
| 18 | 2Q | output | 3-state latch output 2; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V. |
| 19 | 1Q | output | 3-state latch output 1; with OE low it drives the latched value, sourcing up to −16 mA and sinking up to 16 mA at VCC 4.5 V to 5.5 V. |
| 20 | VCC | power_in | Supply pin; the device operates from 2 V to 5.5 V and each VCC pin should be bypassed close to the pin with a 0.1-µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TVSOP-20-4.4mm |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| Input voltage | VI | -0.5 | 7 | V | 4 | ||
| Voltage applied to any output in high-impedance or power-off state | VO | -0.5 | 7 | V | 4 | ||
| Output voltage applied in high or low state | VO | -0.5 | V | 4 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 | 4 | |
| Output clamp current | IOK | -50 | mA | VO < 0 | 4 | ||
| Continuous output current | IO | -35 | 35 | mA | VO = 0 to VCC | 4 | |
| Continuous current through VCC or GND | -70 | 70 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 2 | 5.5 | V | Over operating free-air temperature range | 4 | |
| High-level input voltage | VIH | 1.5 | V | VCC = 2 V | 4 | ||
| Low-level input voltage | VIL | 0.5 | V | VCC = 2 V | 4 | ||
| Input voltage | VI | 0 | 5.5 | V | 4 | ||
| Output voltage, 3-state | VO | 0 | 5.5 | V | 3-state | 4 | |
| Output voltage, high or low state | VO | 0 | V | High or low state | 4 | ||
| High-level output current | IOH | -50 | mA | VCC = 2 V | 4 | ||
| High-level output current | IOH | -2 | mA | VCC = 2.3 V to 2.7 V | 4 | ||
| High-level output current | IOH | -8 | mA | VCC = 3 V to 3.6 V | 4 | ||
| High-level output current | IOH | -16 | mA | VCC = 4.5 V to 5.5 V | 4 | ||
| Low-level output current | IOL | 50 | mA | VCC = 2 V | 5 | ||
| Low-level output current | IOL | 2 | mA | VCC = 2.3 V to 2.7 V | 5 | ||
| Low-level output current | IOL | 8 | mA | VCC = 3 V to 3.6 V | 5 | ||
| Low-level output current | IOL | 16 | mA | VCC = 4.5 V to 5.5 V | 5 | ||
| Input transition rise or fall rate | Δt/Δv | 200 | ns | VCC = 2.3 V to 2.7 V | 5 | ||
| Input transition rise or fall rate | Δt/Δv | 100 | ns | VCC = 3 V to 3.6 V | 5 | ||
| Input transition rise or fall rate | Δt/Δv | 20 | ns | VCC = 4.5 V to 5.5 V | 5 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 5 | ||
| High-level output voltage | VOH | 2 | V | IOH = −2 mA; VCC = 2.3 V | 5 | ||
| High-level output voltage | VOH | 2.48 | V | IOH = −8 mA; VCC = 3 V | 5 | ||
| High-level output voltage | VOH | 3.8 | V | IOH = −16 mA; VCC = 4.5 V | 5 | ||
| Low-level output voltage | VOL | 0.1 | V | IOL = 50 µA; VCC = 2 V to 5.5 V | 5 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 2 mA; VCC = 2.3 V | 5 | ||
| Low-level output voltage | VOL | 0.44 | V | IOL = 8 mA; VCC = 3 V | 5 | ||
| Low-level output voltage | VOL | 0.55 | V | IOL = 16 mA; VCC = 4.5 V | 5 | ||
| Input leakage current | II | -1 | 1 | µA | VI = 5.5 V or GND; VCC = 0 to 5.5 V | 5 | |
| Off-state output current | IOZ | -5 | 5 | µA | VO = VCC or GND; VCC = 5.5 V | 5 | |
| Quiescent supply current | ICC | 20 | µA | VI = VCC or GND, IO = 0; VCC = 5.5 V | 5 | ||
| Power-off leakage current | Ioff | 5 | µA | VI or VO = 0 to 5.5 V; VCC = 0 | 5 | ||
| Pulse duration LE high | tw | 5 | ns | VCC = 2.5 V ± 0.2 V; over operating free-air temperature range | 6 | ||
| Setup time, data before LE↓ | tsu | 3.5 | ns | VCC = 2.5 V ± 0.2 V; over operating free-air temperature range | 6 | ||
| Hold time, data after LE↓ | th | 1.5 | ns | VCC = 2.5 V ± 0.2 V; over operating free-air temperature range | 6 | ||
| Propagation delay D to Q | tpd | 1 | 8 | ns | VCC = 5 V ± 0.5 V; CL = 15 pF; over operating free-air temperature range | 8 | |
| Propagation delay D to Q | tpd | 1 | 10 | ns | VCC = 5 V ± 0.5 V; CL = 50 pF; over operating free-air temperature range | 8 | |
| Propagation delay LE to Q | tpd | 1 | 9 | ns | VCC = 5 V ± 0.5 V; CL = 15 pF; over operating free-air temperature range | 8 | |
| Propagation delay LE to Q | tpd | 1 | 11 | ns | VCC = 5 V ± 0.5 V; CL = 50 pF; over operating free-air temperature range | 8 | |
| Enable time OE to Q | ten | 1 | 9 | ns | VCC = 5 V ± 0.5 V; CL = 15 pF; over operating free-air temperature range | 8 | |
| Enable time OE to Q | ten | 1 | 11 | ns | VCC = 5 V ± 0.5 V; CL = 50 pF; over operating free-air temperature range | 8 | |
| Disable time OE to Q | tdis | 1 | 9 | ns | VCC = 5 V ± 0.5 V; CL = 15 pF; over operating free-air temperature range | 8 | |
| Disable time OE to Q | tdis | 1 | 11 | ns | VCC = 5 V ± 0.5 V; CL = 50 pF; over operating free-air temperature range | 8 | |
| Junction-to-ambient thermal resistance (DGV, TVSOP package) | RθJA | 92 | °C/W | DGV (TVSOP) package | 5 | ||
| Input capacitance | Ci | 1.8 | pF | VI = VCC or GND; VCC = 3.3 V | 5 |
CAD (Adom-generated)
- Symbol:
SN74LV573ADGVR - Footprint:
Adom_Gen:Texas_Instruments_SN74_a53846 - 3D model: generated to fit the land (STEP)
- 3D model files:
sn74lv573adgvr-etched.step/sn74lv573adgvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74lv573adgvr.step/sn74lv573adgvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
2e8cd936f7c7337d, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.