component
M95640-WMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM95640-WMN6TP
STMicroelectronics · EEPROM · SOIC-8
M95640-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select: when driven high the device is deselected and Serial Data Output (Q) goes to high impedance (Standby Power mode unless an internal write is in progress); driving S low selects the device (Active Power mode) and a falling edge on S is required before any instruction after power-up. |
| 2 | Q | output | Serial Data Output: used to transfer data serially out of the device; data is shifted out MSB first on the falling edge of Serial Clock (C), and is high impedance when S is high or during Hold. |
| 3 | W | input | Write Protect: freezes the size of the memory area protected against Write instructions as set by the BP1/BP0 bits of the Status Register; must be driven high or low and held stable during all Write instructions, and together with the SRWD bit enables the Hardware Protected mode. |
| 4 | VSS | power_in | Ground: reference for all signals, including the VCC supply voltage. |
| 5 | D | input | Serial Data Input: used to transfer instructions, addresses and data to be written into the device; values are latched MSB first on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock: provides the timing of the serial interface (high-speed clock up to 20 MHz); input data on D is latched on the rising edge and output data on Q changes on the falling edge of this clock. |
| 7 | HOLD | input | Hold: used to pause serial communication with the device without deselecting it; while HOLD is low (with S already low and C low) Q is high impedance and D and C are Don't Care. |
| 8 | VCC | power_in | Supply voltage input, specified as 2.5 V to 5.5 V for the M95640-W device grade, which must remain stable within the valid operating range during all operations. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95640-WMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m95640-wmn6tp-etched.step/m95640-wmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95640-wmn6tp.step/m95640-wmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (53 pp, sha256
6b136d5d2ea5ba78, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).