3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM0G3106QRHBRQ1
Texas Instruments · IC · VQFN-32(5x5)
M0G3106QRHBRQ1 from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | 5V-tolerant open-drain GPIO with wake up from SHUTDOWN, muxed with UART0_TX, I2C0_SDA, TIMA0_C0, TIMA_FAL1, TIMG8_C1, FCC_IN and default BSL I2C data; needs a pullup for output high. |
| 2 | PA1 | bidirectional | 5V-tolerant open-drain GPIO with wake up from SHUTDOWN, muxed with UART0_RX, I2C0_SCL, TIMA0_C1, TIMA_FAL2, TIMG8_IDX, TIMG8_C0 and default BSL I2C clock; needs a pullup for output high. |
| 3 | NRST | input | Active-low reset input that must be pulled high to VDD for the device to start. |
| 4 | VDD | power_in | Power supply, 1.62V to 3.6V recommended, with 10uF capacitor to VSS. |
| 5 | VSS | power_in | Ground supply. |
| 6 | PA2 | bidirectional | Standard-drive GPIO or ROSC external resistor connection (100kΩ to VSS) for improving SYSOSC accuracy, muxed with TIMG8_C1, SPI0_CS0, TIMG7_C1, SPI1_CS0. |
| 7 | PA3 | bidirectional | Standard-drive GPIO or LFXIN input for the low-frequency crystal oscillator, muxed with TIMG8_C0, SPI0_CS1, UART2_CTS, TIMA0_C2, TIMG7_C0, TIMA0_C1, I2C1_SDA. |
| 8 | PA4 | bidirectional | Standard-drive GPIO or LFXOUT crystal output, also LFCLK_IN digital low-frequency clock input, muxed with TIMG8_C1, SPI0_POCI, UART2_RTS, TIMA0_C3, TIMG7_C1, TIMA0_C1N, I2C1_SCL. |
| 9 | PA5 | bidirectional | Standard-drive GPIO or HFXIN input for the high-frequency crystal oscillator, muxed with TIMG8_C0, SPI0_PICO, TIMA_FAL1, TIMG0_C0, TIMG6_C0, FCC_IN. |
| 10 | PA6 | bidirectional | Standard-drive GPIO or HFXOUT crystal output, also HFCLK_IN digital high-frequency clock input, muxed with TIMG8_C1, SPI0_SCK, TIMA_FAL0, TIMG0_C1, TIMG6_C1, TIMA0_C2N. |
| 11 | PA7 | bidirectional | Standard-drive GPIO muxed with CLK_OUT, TIMG8_C0, TIMA0_C2, TIMG8_IDX, TIMG7_C1, TIMA0_C1. |
| 12 | PA8 | bidirectional | Standard-drive GPIO muxed with UART1_TX, SPI0_CS0, UART0_RTS, TIMA0_C0, TIMA1_C0N. |
| 13 | PA9 | bidirectional | High-speed GPIO muxed with UART1_RX, SPI0_PICO, UART0_CTS, TIMA0_C1, RTC_OUT, TIMA0_C0N, TIMA1_C1N, CLK_OUT. |
| 14 | PA10 | bidirectional | High-drive GPIO with wake up from SHUTDOWN muxed with UART0_TX, SPI0_POCI, I2C0_SDA, TIMA1_C0, TIMG12_C0, TIMA0_C2, I2C1_SDA, CLK_OUT; default BSL UART transmit. |
| 15 | PA11 | bidirectional | High-drive GPIO with wake up from SHUTDOWN muxed with UART0_RX, SPI0_SCK, I2C0_SCL, TIMA1_C1, TIMA0_C2N, I2C1_SCL; default BSL UART receive. |
| 16 | PA12 | bidirectional | High-speed GPIO muxed with UART3_CTS, SPI0_SCK, TIMG0_C0, CAN_TX, TIMA0_C3, FCC_IN. |
| 17 | PA13 | bidirectional | High-speed GPIO muxed with UART3_RTS, SPI0_POCI, UART3_RX, TIMG0_C1, CAN_RX, TIMA0_C3N. |
| 18 | PA14 | bidirectional | High-speed GPIO with ADC0 analog input A0_12, muxed with UART0_CTS, SPI0_PICO, UART3_TX, TIMG12_C0, CLK_OUT. |
| 19 | PA15 | bidirectional | Standard-drive GPIO with ADC1 analog input A1_0, muxed with UART0_RTS, SPI1_CS2, I2C1_SCL, TIMA1_C0, TIMG8_IDX, TIMA1_C0N, TIMA0_C2. |
| 20 | PA16 | bidirectional | Standard-drive GPIO with ADC1 analog input A1_1, muxed with SPI1_POCI, I2C1_SDA, TIMA1_C1, TIMA1_C1N, TIMA0_C2N, FCC_IN. |
| 21 | PA17 | bidirectional | Standard GPIO with wake up from SHUTDOWN and ADC1 analog input A1_2, muxed with UART1_TX, SPI1_SCK, I2C1_SCL, TIMA0_C3, TIMG7_C0, TIMA1_C0. |
| 22 | PA18 | bidirectional | Standard GPIO with wake up from SHUTDOWN, ADC1 input A1_3, GPAMP_IN- and BSL_invoke, muxed with UART1_RX, SPI1_PICO, I2C1_SDA, TIMA0_C3N, TIMG7_C1, TIMA1_C1. |
| 23 | PA19 | bidirectional | High-speed GPIO used as SWDIO serial wire debug data input/output. |
| 24 | PA20 | bidirectional | Standard-drive GPIO used as SWCLK serial wire debug clock input. |
| 25 | PA21 | bidirectional | Standard-drive GPIO with ADC1 input A1_7 and VREF- reference ground; no injection current allowed on this pin (internal test connection); muxed with UART2_TX, TIMG8_C0, UART1_CTS, TIMA0_C0, TIMG6_C0. |
| 26 | PA22 | bidirectional | Standard-drive GPIO with ADC0 input A0_7 and GPAMP_OUT, muxed with UART2_RX, TIMG8_C1, UART1_RTS, TIMA0_C1, CLK_OUT, TIMA0_C0N, TIMG6_C1. |
| 27 | PA23 | bidirectional | Standard-drive GPIO or VREF+ voltage reference supply (external reference input or internal reference output, needs decoupling capacitor to VREF-), muxed with UART2_TX, SPI0_CS3, TIMA0_C3, TIMG0_C0, UART3_CTS, TIMG7_C0, TIMG8_C0. |
| 28 | PA24 | bidirectional | Standard-drive GPIO with ADC0 analog input A0_3, muxed with UART2_RX, SPI0_CS2, TIMA0_C3N, TIMG0_C1, UART3_RTS, TIMG7_C1, TIMA1_C1. |
| 29 | PA25 | bidirectional | Standard-drive GPIO with ADC0 analog input A0_2, muxed with UART3_RX, SPI1_CS3, TIMG12_C1, TIMA0_C3, TIMA0_C1N. |
| 30 | PA26 | bidirectional | Standard-drive GPIO with ADC0 input A0_1 and GPAMP_IN+, muxed with UART3_TX, SPI1_CS0, TIMG8_C0, TIMA_FAL0, CAN_TX, TIMG7_C0. |
| 31 | PA27 | bidirectional | Standard-drive GPIO with ADC0 analog input A0_0, muxed with RTC_OUT, SPI1_CS1, TIMG8_C1, TIMA_FAL2, CAN_RX, TIMG7_C1. |
| 32 | VCORE | power_out | Regulated core power supply output; connect only a 470nF (0.47uF) capacitor to VSS and apply no external voltage or load. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 4.1 | V | At VDD pin | 25 | |
| Input voltage, 5-V tolerant open-drain pins | VI | -0.3 | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 25 | |
| Input voltage, common pins | VI | -0.3 | 4.1 | V | Applied to any common tolerance pins; VDD + 0.3 (4.1 MAX) | 25 | |
| Current into VDD pin | IVDD | 80 | mA | -40C ≤ Tj ≤ 130C | 25 | ||
| Current out of VSS pin | IVSS | 80 | mA | -40C ≤ Tj ≤ 130C | 25 | ||
| Diode current at any device pin | ID | -2 | 2 | mA | 25 | ||
| Junction temperature | TJ | -40 | 130 | °C | 25 | ||
| Storage temperature | Tstg | -40 | 150 | °C | 25 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human body model, AEC-Q100-002 | 25 | |
| Supply voltage | VDD | 1.62 | 3.6 | V | 25 | ||
| Voltage on VCORE pin | VCORE | 1.35 | V | 25 | |||
| Capacitor between VDD and VSS | CVDD | 10 | uF | ±20% tolerance or better | 25 | ||
| Capacitor between VCORE and VSS | CVCORE | 470 | nF | ±20% tolerance or better | 25 | ||
| Ambient temperature, Q version | TA | -40 | 125 | °C | 25 | ||
| Max junction temperature, Q version | TJ | 130 | °C | 25 | |||
| MCLK frequency, 2 flash wait states | fMCLK | 80 | MHz | 2 flash wait states | 26 | ||
| ULPCLK frequency | fULPCLK | 40 | MHz | 26 | |||
| Junction-to-ambient thermal resistance | RθJA | 33.7 | °C/W | VQFN-32 (RHB) | 26 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 24.5 | °C/W | VQFN-32 (RHB) | 26 | ||
| Junction-to-board thermal resistance | RθJB | 14 | °C/W | VQFN-32 (RHB) | 26 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 4.1 | °C/W | VQFN-32 (RHB) | 26 | ||
| Supply current RUN 80MHz | IDDRUN | 8 | mA | VDD=3.3V, MCLK=SYSPLL, CoreMark, flash, 80MHz, -40°C | 28 | ||
| Supply current STANDBY, LFXT, RTC | IDDSTBY0 | 2 | 7 | uA | VDD=3.3V, LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 25°C | 29 | |
| Supply current SHUTDOWN | IDDSHDN | 40 | 80 | nA | VDD=3.3V, -40°C | 29 | |
| Power-on reset voltage level, rising | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 29 |
| Power-on reset voltage level, falling | VPOR- | 0.9 | 1.25 | 1.54 | V | Falling | 29 |
| BOR level 0 rising | VBOR0+ | 1.56 | 1.59 | 1.62 | V | Rising | 30 |
| BOR level 0 falling | VBOR0- | 1.55 | 1.58 | 1.61 | V | Falling | 30 |
| Program and erase supply voltage | VDDPGM/ERASE | 1.62 | 3.6 | V | 30 | ||
| LFOSC accuracy | -5 | 5 | % | -40 ℃ ≤ Ta ≤ 125 ℃ | 33 | ||
| SYSOSC accuracy, FCL disabled 32MHz | fSYSOSC | -2.6 | 1.8 | % | SETUSEFCL=0, SYSOSCCFG.FREQ=00, -40 ℃ ≤ Ta ≤ 125 ℃ | 33 | |
| High level input voltage, all I/O except ODIO & Reset | VIH | 0.7 | V | VDD≥1.62V; min = 0.7VDD (printed 0.7VDD), max VDD+0.3 | 35 | ||
| Low level input voltage, all I/O except ODIO & Reset | VIL | -0.3 | 0.3 | V | VDD≥1.62V; max = 0.3*VDD | 35 | |
| High-Z leakage current, SDIO (not PM) | Ilkg | 50 | nA | 1.62V ≤ VDD ≤ 3.6V, -40 ℃ ≤ Ta ≤ 125 ℃ | 35 | ||
| Input capacitance | CI | 5 | pF | 35 | |||
| ADC effective number of bits | ENOB | 10.9 | 11.1 | bit | f_in = 10KHz, External reference | 39 | |
| ADC integral linearity error | EI | -2 | 2 | LSB | External reference | 40 | |
| ADC offset error | EO | -5 | 5 | mV | Internal or External reference | 40 | |
| VREF output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 41 |
| VREF output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 41 |
| Temperature sensor temperature coefficient | TSc | -2.1 | -1.8 | -1.7 | mV/℃ | -40℃ ≤ Tj ≤ 130℃ | 41 |
CAD (KiCad official)
- Symbol:
M0G3106QRHBRQ1 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
m0g3106qrhbrq1-etched.step/m0g3106qrhbrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m0g3106qrhbrq1.step/m0g3106qrhbrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (119 pp, sha256
26a2af921de18f14, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).