3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32L051R6T6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
STM32L051R6T6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply for the I/Os and the internal regulator, 1.65 to 3.6 V, provided externally through the VDD pins. |
| 2 | PC13 | bidirectional | 5 V tolerant (FT) I/O; additional functions: RTC_TAMP1, RTC_TS, RTC_OUT, WKUP2. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) I/O, function after reset PC14; additional function: OSC32_IN. |
| 4 | PC15-OSC32_OUT (PC15) | bidirectional | Standard 3.3 V (TC) I/O, function after reset PC15; additional function: OSC32_OUT. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V (TC) I/O, function after reset PH0; additional function: OSC_IN (HSE oscillator input). |
| 6 | PH1-OSC_OUT (PH1) | bidirectional | Standard 3.3 V (TC) I/O, function after reset PH1; additional function: OSC_OUT (HSE oscillator output). |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: LPTIM1_IN1, EVENTOUT; additional function: ADC_IN10. |
| 9 | PC1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: LPTIM1_OUT, EVENTOUT; additional function: ADC_IN11. |
| 10 | PC2 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: LPTIM1_IN2, SPI2_MISO/I2S2_MCK; additional function: ADC_IN12. |
| 11 | PC3 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: LPTIM1_ETR, SPI2_MOSI/I2S2_SD; additional function: ADC_IN13. |
| 12 | VSSA | power_in | Analog ground, which must be connected to VSS. |
| 13 | VDDA | power_in | Analog supply for the ADC, reset blocks, RCs and PLL, 1.65 to 3.6 V, which must be the same voltage as VDD. |
| 14 | PA0 | bidirectional | Standard 3.3 V (TC) I/O; alternate functions: TIM2_CH1, USART2_CTS, TIM2_ETR, COMP1_OUT; additional functions: COMP1_INM6, ADC_IN0, RTC_TAMP2/WKUP1. |
| 15 | PA1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: EVENTOUT, TIM2_CH2, USART2_RTS/USART2_DE, TIM21_ETR; additional functions: COMP1_INP, ADC_IN1. |
| 16 | PA2 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: TIM21_CH1, TIM2_CH3, USART2_TX, COMP2_OUT; additional functions: COMP2_INM6, ADC_IN2. |
| 17 | PA3 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: TIM21_CH2, TIM2_CH4, USART2_RX; additional functions: COMP2_INP, ADC_IN3. |
| 18 | VSS | power_in | Ground reference; all main power and ground pins must always be connected to the external power supply within the permitted range. |
| 19 | VDD | power_in | Power supply for the I/Os and the internal regulator, 1.65 to 3.6 V. |
| 20 | PA4 | bidirectional | Standard 3.3 V (TC) I/O; alternate functions: SPI1_NSS, USART2_CK, TIM22_ETR; additional functions: COMP1_INM4, COMP2_INM4, ADC_IN4. |
| 21 | PA5 | bidirectional | Standard 3.3 V (TC) I/O; alternate functions: SPI1_SCK, TIM2_ETR, TIM2_CH1; additional functions: COMP1_INM5, COMP2_INM5, ADC_IN5. |
| 22 | PA6 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: SPI1_MISO, LPUART1_CTS, TIM22_CH1, EVENTOUT, COMP1_OUT; additional function: ADC_IN6. |
| 23 | PA7 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: SPI1_MOSI, TIM22_CH2, EVENTOUT, COMP2_OUT; additional function: ADC_IN7. |
| 24 | PC4 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: EVENTOUT, LPUART1_TX; additional function: ADC_IN14. |
| 25 | PC5 | bidirectional | 5 V tolerant (FT) I/O; alternate function: LPUART1_RX; additional function: ADC_IN15. |
| 26 | PB0 | bidirectional | 5 V tolerant (FT) I/O; alternate function: EVENTOUT; additional functions: ADC_IN8, VREF_OUT. |
| 27 | PB1 | bidirectional | 5 V tolerant (FT) I/O; alternate function: LPUART1_RTS/LPUART1_DE; additional functions: ADC_IN9, VREF_OUT. |
| 28 | PB2 | bidirectional | 5 V tolerant (FT) I/O; alternate function: LPTIM1_OUT. |
| 29 | PB10 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: TIM2_CH3, LPUART1_TX, SPI2_SCK, I2C2_SCL. |
| 30 | PB11 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: EVENTOUT, TIM2_CH4, LPUART1_RX, I2C2_SDA. |
| 31 | VSS | power_in | Ground reference; all main power and ground pins must always be connected to the external power supply within the permitted range. |
| 32 | VDD | power_in | Power supply for the I/Os and the internal regulator, 1.65 to 3.6 V. |
| 33 | PB12 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: SPI2_NSS/I2S2_WS, LPUART1_RTS/LPUART1_DE, EVENTOUT. |
| 34 | PB13 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O; alternate functions: SPI2_SCK/I2S2_CK, LPUART1_CTS, I2C2_SCL, TIM21_CH1. |
| 35 | PB14 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O; alternate functions: SPI2_MISO/I2S2_MCK, RTC_OUT, LPUART1_RTS/LPUART1_DE, I2C2_SDA, TIM21_CH2. |
| 36 | PB15 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: SPI2_MOSI/I2S2_SD, RTC_REFIN. |
| 37 | PC6 | bidirectional | 5 V tolerant (FT) I/O; alternate function: TIM22_CH1. |
| 38 | PC7 | bidirectional | 5 V tolerant (FT) I/O; alternate function: TIM22_CH2. |
| 39 | PC8 | bidirectional | 5 V tolerant (FT) I/O; alternate function: TIM22_ETR. |
| 40 | PC9 | bidirectional | 5 V tolerant (FT) I/O; alternate function: TIM21_ETR. |
| 41 | PA8 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: MCO, EVENTOUT, USART1_CK. |
| 42 | PA9 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: MCO, USART1_TX. |
| 43 | PA10 | bidirectional | 5 V tolerant (FT) I/O; alternate function: USART1_RX. |
| 44 | PA11 | bidirectional | 5 V tolerant (FT) I/O supplied by VDDIO2 (Figure 3 note); alternate functions: SPI1_MISO, EVENTOUT, USART1_CTS, COMP1_OUT. |
| 45 | PA12 | bidirectional | 5 V tolerant (FT) I/O supplied by VDDIO2 (Figure 3 note); alternate functions: SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE, COMP2_OUT. |
| 46 | PA13 | bidirectional | 5 V tolerant (FT) I/O; alternate function: SWDIO. |
| 47 | VSS | power_in | Ground reference; all main power and ground pins must always be connected to the external power supply within the permitted range. |
| 48 | VDDIO2 | power_in | Supply for the PA11 and PA12 I/Os, independent from VDD and VDDA, 1.65 to 3.6 V. |
| 49 | PA14 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: SWCLK, USART2_TX. |
| 50 | PA15 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1. |
| 51 | PC10 | bidirectional | 5 V tolerant (FT) I/O; alternate function: LPUART1_TX. |
| 52 | PC11 | bidirectional | 5 V tolerant (FT) I/O; alternate function: LPUART1_RX. |
| 53 | PC12 | bidirectional | 5 V tolerant (FT) I/O; no alternate function is listed in the pin definitions table. |
| 54 | PD2 | bidirectional | 5 V tolerant (FT) I/O; alternate function: LPUART1_RTS/LPUART1_DE. |
| 55 | PB3 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: SPI1_SCK, TIM2_CH2, EVENTOUT; additional function: COMP2_INN. |
| 56 | PB4 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: SPI1_MISO, EVENTOUT, TIM22_CH1; additional function: COMP2_INP. |
| 57 | PB5 | bidirectional | 5 V tolerant (FT) I/O; alternate functions: SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM22_CH2; additional function: COMP2_INP. |
| 58 | PB6 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O; alternate functions: USART1_TX, I2C1_SCL, LPTIM1_ETR; additional function: COMP2_INP. |
| 59 | PB7 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O; alternate functions: USART1_RX, I2C1_SDA, LPTIM1_IN2; additional functions: COMP2_INP, PVD_IN. |
| 60 | BOOT0 | input | Dedicated BOOT0 pin, input range 0 to 5.5 V, which selects the boot option together with the nBOOT1 option bit at startup. |
| 61 | PB8 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O; alternate function: I2C1_SCL. |
| 62 | PB9 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O; alternate functions: EVENTOUT, I2C1_SDA, SPI2_NSS/I2S2_WS. |
| 63 | VSS | power_in | Ground reference; all main power and ground pins must always be connected to the external power supply within the permitted range. |
| 64 | VDD | power_in | Power supply for the I/Os and the internal regulator, 1.65 to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDDIO2, VDD) | VDD-VSS | -0.3 | 4 | V | 48 | ||
| Input voltage on any other pin | VIN | -0.3 | 4 | V | 48 | ||
| Input voltage on TC pin | VIN | 4 | V | 48 | |||
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 48 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | 48 | |||
| Variations between all different ground pins | /ΔVSS/ | 50 | mV | 48 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ -VDDA | 0.4 | V | 48 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 49 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 49 | |||
| Total current into VDDIO2 power line (source) | ΣIVDDIO2 | 25 | mA | 49 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 49 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 49 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | 49 | |||
| Output current sunk by FTf pins | IIO | 22 | mA | 49 | |||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | 49 | |||
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | 90 | mA | 49 | |||
| Total output current sunk by PA11 and PA12 | 25 | mA | 49 | ||||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | 49 | |||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | 49 | ||
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | 49 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 49 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 49 | ||
| Maximum junction temperature | TJ | 150 | °C | 49 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 50 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 50 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 50 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 50 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 50 | |
| Analog operating voltage (all features) | VDDA | 1.65 | 3.6 | V | Must be the same voltage as VDD | 50 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 50 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 50 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 50 | ||
| Input voltage on TC pin | VIN | -0.3 | V | 50 | |||
| Power dissipation, LQFP64 package | PD | 444 | mW | TA = 85 °C (range 6) or TA = 105 °C (range 7) | 50 | ||
| Power dissipation, LQFP64 package | PD | 111 | mW | TA = 125 °C (range 3) | 50 | ||
| Temperature range, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation (range 6) | 51 | |
| Temperature range, maximum power dissipation | TA | -40 | 105 | °C | Maximum power dissipation (range 7) | 51 | |
| Temperature range, maximum power dissipation | TA | -40 | 125 | °C | Maximum power dissipation (range 3) | 51 | |
| Junction temperature range | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C (range 6) | 51 | |
| Junction temperature range | TJ | -40 | 125 | °C | -40 °C ≤ TA ≤ 105 °C (range 7) | 51 | |
| Junction temperature range | TJ | -40 | 130 | °C | -40 °C ≤ TA ≤ 125 °C (range 3) | 51 | |
| Power-on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 52 |
| Power-on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 52 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 52 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 52 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 53 |
| HSI16 oscillator accuracy (factory-calibrated) | ACCHSI16 | -5.45 | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = − 40 to 125 °C | 70 | |
| LSI oscillator frequency | fLSI | 26 | 38 | 56 | kHz | 71 | |
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 73 | ||
| PLL output clock | fPLL_OUT | 2 | 32 | MHz | 73 | ||
| Supply current in Stop mode | IDD (Stop) | 0.41 | 1 | µA | TA = − 40 to 25°C | 61 | |
| Supply current in Stop mode | IDD (Stop) | 0.63 | 2.1 | µA | TA = 55°C | 61 | |
| Supply current in Stop mode | IDD (Stop) | 1.7 | 4.5 | µA | TA = 85°C | 61 | |
| Supply current in Stop mode | IDD (Stop) | 4 | 9.6 | µA | TA = 105°C | 61 | |
| Supply current in Stop mode | IDD (Stop) | 11 | 24 | µA | TA = 125°C | 61 | |
| Supply current in Standby mode | IDD (Standby) | 0.29 | 0.6 | µA | Independent watchdog and LSI OFF, TA = − 40 to 25°C | 62 | |
| Supply current in Run mode, code executed from Flash, 32 MHz | IDD (Run from Flash) | 6.3 | 6.8 | mA | Range 1, VCORE=1.8 V, VOS[1:0]=01, fHCLK 32 MHz | 55 |
CAD (KiCad official)
- Symbol:
STM32L051R6T6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32l051r6t6-etched.step/stm32l051r6t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l051r6t6.step/stm32l051r6t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (133 pp, sha256
232fdca5c41218a1, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).