component
7XA0000602
Public Made by Adomby adom
TXC Corp Crystal Oscillators, SMD3225-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown7XA0000602
TXC Corp · Crystal Oscillators · SMD3225-4P
7XA0000602 from TXC Corp, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Enable control input: VIH is 70%Vdd minimum and VIL is 30%Vdd maximum; high or open keeps normal oscillation, while low stops oscillation and puts the output in high impedance (standby current 10 uA max with OE low). |
| 2 | GND | power_in | Ground pin; the datasheet gives no voltage or current limit for this pin. |
| 3 | OUT | output | CMOS clock output, with VOH of at least 90%Vdd (2.5 or 3.3 V) or Vdd-0.4 V (1.8 V) and VOL of at most 10%Vdd (2.5 or 3.3 V) or 0.4 V (1.8 V), tested into a 15 pF load. |
| 4 | VDD | power_in | Supply pin rated at 1.8, 2.5 or 3.3 V ±10%. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TXC Corp |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Nominal Frequency (2.5 V, 3.3 V) | F | 1 | 156.25 | MHz | @ 2.5 V, 3.3 V | 1 | |
| Nominal Frequency (1.8 V) | F | 1 | 125 | MHz | @ 1.8 V | 1 | |
| Frequency Tolerance | FT | -25 | 25 | ppm | @ -40~85℃, Note 1 | 1 | |
| Frequency Tolerance | FT | -50 | 50 | ppm | @ -40~105℃, Note 1 | 1 | |
| Operating Temperature Range | Topr | -40 | 25 | 105 | ℃ | 1 | |
| Supply Voltage tolerance | Vdd | -10 | 10 | % | Nominal 1.8, 2.5 or 3.3 V | 1 | |
| Current Consumption | Icc | 25 | mA | 1 | |||
| Standby Current | Icc(ST) | 10 | uA | OE = Low | 1 | ||
| Output Voltage High | VoH | 90 | %Vdd | Vdd @ 2.5 or 3.3 V | 1 | ||
| Output Voltage Low | VoL | 10 | %Vdd | Vdd @ 2.5 or 3.3 V | 1 | ||
| Output Voltage Low | VoL | 0.4 | V | Vdd @ 1.8 V | 1 | ||
| Rise Time | Tr | 5 | ns | 10% → 90% Vdd Level | 1 | ||
| Rise Time | Tr | 4 | ns | 20% → 80% Vdd Level | 1 | ||
| Fall Time | Tf | 5 | ns | 90% → 10% Vdd Level | 1 | ||
| Fall Time | Tf | 4 | ns | 80% → 20% Vdd Level | 1 | ||
| Symmetry (Duty ratio) | TH/T | 45 | 55 | % | 1 | ||
| Start-up Time | Tosc | 10 | ms | To 90% of Final Amplitude | 2 | ||
| Output Disable Delay Time | T off | 250 | us | 2 | |||
| Output Enable Delay Time | T on | 300 | us | 2 | |||
| Enable Voltage High | VIH | 70 | %Vdd | 2 | |||
| Disable Voltage Low | VIL | 30 | %Vdd | 2 | |||
| Aging | -3 | 3 | ppm/yr | 1st. Year at 25℃ | 2 | ||
| RMS Phase Jitter (10 MHz to 40 MHz) | PJ | 1 | ps | Fout 10MHz~40MHz, integrated from 12KHz ~ 5MHz | 2 | ||
| RMS Phase Jitter (40 MHz to 200 MHz) | PJ | 1 | ps | Fout 40MHz~200MHz, integrated from 12KHz ~ 20MHz | 2 |
CAD (KiCad official)
- Symbol:
7XA0000602 - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
7xa0000602-etched.step/7xa0000602-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);7xa0000602.step/7xa0000602.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TXC Corp datasheet (3 pp, sha256
0f47165a1e9a82a5, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).