Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMK00105SQ

Texas Instruments · Real-Time Clocks (RTC) · WQFN-24-EP(4x4)

LMK00105SQ from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin for the LMK00105 WQFN package.
2 Vddo power_in Power supply for Bank A (CLKout0 and CLKout1) outputs, with Vddo required to be less than or equal to Vdd.
3 CLKout0 output LVCMOS clock output on Bank A.
4 GND power_in Ground pin for the LMK00105 WQFN package.
5 CLKout1 output LVCMOS clock output on Bank A.
6 Vddo power_in Power supply for Bank A (CLKout0 and CLKout1) outputs, with Vddo required to be less than or equal to Vdd.
7 GND power_in Ground pin for the LMK00105 WQFN package.
8 Vdd power_in Power supply for the operating core and input buffer, recommended 2.375 V to 3.45 V.
9 OSCin input Input for crystal oscillator, with crystal input frequency of 10 to 40 MHz.
10 OSCout output Output for crystal oscillator.
11 GND power_in Ground pin for the LMK00105 WQFN package.
12 GND power_in Ground pin for the LMK00105 WQFN package.
13 CLKout2 output LVCMOS clock output on Bank B.
14 Vddo power_in Power supply for Bank B (CLKout2 to CLKout4) outputs, with Vddo required to be less than or equal to Vdd.
15 CLKout3 output LVCMOS clock output on Bank B.
16 GND power_in Ground pin for the LMK00105 WQFN package.
17 CLKout4 output LVCMOS clock output on Bank B.
18 Vddo power_in Power supply for Bank B (CLKout2 to CLKout4) outputs, with Vddo required to be less than or equal to Vdd.
19 GND power_in Ground pin for the LMK00105 WQFN package.
20 CLKin* input Complementary clock input pin, used with CLKin for differential input.
21 CLKin input Clock input pin supporting LVPECL, LVDS, HCSL, SSTL, LVCMOS and LVTTL universal inputs.
22 SEL input Input clock selection pin with an internal pulldown resistor.
23 Vdd power_in Power supply for the operating core and input buffer, recommended 2.375 V to 3.45 V.
24 OE input Output enable pin with an internal pulldown resistor, supporting synchronous glitch-free enable.
25 DAP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24-EP(4x4)
Category RTC/Clock Chip
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Core Supply Voltage Vdd -0.3 3.6 V 5
Output Supply Voltage Vddo -0.3 3.6 V 5
Lead Temperature TL 260 °C solder 4 s 5
Junction Temperature TJ 125 °C 5
Storage temperature Tstg -65 150 °C 5
Electrostatic discharge Human body model (HBM) V(ESD) -2500 2500 V per ANSI/ESDA/JEDEC JS-001 5
Electrostatic discharge Charged-device model (CDM) V(ESD) -1000 1000 V per JEDEC JESD22-C101 5
Ambient Temperature TA -40 25 85 °C 5
Core Supply Voltage Vdd 2.375 3.3 3.45 V 5
Output Supply Voltage Vddo 1.425 3.3 V 5
Junction-to-ambient thermal resistance RθJA 46.7 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 50.3 °C/W 5
Junction-to-board thermal resistance RθJB 25.5 °C/W 5
Junction-to-top characterization parameter ψJT 1.9 °C/W 5
Junction-to-board characterization parameter ψJB 25.6 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 13.6 °C/W 5
Core Supply Voltage Vdd 2.375 3.45 V 6
Output Supply Voltage Vddo 1.425 V 6
Core Current IVdd 16 25 mA No CLKin 6
Output Skew 6 25 ps Measured between outputs, referenced to CLKout0 6
Propagation Delay CLKin to CLKout tPD 0.85 1.4 2.2 ns CL = 5 pF, RL = 50 Ω; Vdd = 3.3 V; Vddo = 3.3 V 6
Propagation Delay CLKin to CLKout tPD 1.1 1.8 2.8 ns CL = 5 pF, RL = 50 Ω; Vdd = 2.5 V; Vddo = 1.5 V 6
Part-to-part Skew tPD,PP 0.35 ns CL = 5 pF, RL = 50 Ω; Vdd = 3.3 V; Vddo = 3.3 V 6
Part-to-part Skew tPD,PP 0.6 ns CL = 5 pF, RL = 50 Ω; Vdd = 2.5 V; Vddo = 1.5 V 6
Output Frequency fCLKout 200 MHz 6
Output Low Voltage VCLKoutLow 0.1 V 6
Output Resistance RCLKout 50 ohm 6
Rise/Fall Time tRise 250 ps Vdd = 3.3 V, Vddo = 1.8 V, CL = 10 pF 6
Rise/Fall Time tRise 275 ps Vdd = 2.5 V, Vddo = 2.5 V, CL = 10 pF 6
Rise/Fall Time tRise 315 ps Vdd = 3.3 V, Vddo = 3.3 V, CL = 10 pF 6
RMS Additive Jitter tj 30 fs fCLKout = 156.25 MHz, CMOS input slew rate ≥ 2 V/ns, CL = 5 pF, BW = 12 kHz to 20 MHz 6
Input Low Voltage VLow 0.4 V Vdd = 2.5 V 6
Input High Voltage VHigh 1.3 V Vdd = 2.5 V 6
Input High Voltage VHigh 1.6 V Vdd = 3.3 V 6
High Level Input Current IIH 50 uA 6
Low Level Input Current IIL -5 5 uA 6
High Level Input Current IIH 20 uA VCLKin = Vdd 6
Low Level Input Current IIL -20 uA VCLKin = 0 V 6
Differential Input Common Mode Input Voltage VCM 0.5 V VID = 150 mV 6
Single-Ended Input Voltage Swing VI_SE 0.3 2 Vpp CLKinX driven single-ended (AC or DC coupled), CLKinX* AC coupled to GND or externally biased within VCM range 7
Differential Input Voltage Swing VID 0.15 1.5 V CLKin driven differentially 7
Input Frequency fOSCin 200 MHz Single-Ended Input, OSCout floating 7
Crystal Frequency Input Range fXTAL 10 40 MHz Fundamental mode crystal; ESR < 200 Ω (fXtal ≤ 30 MHz); ESR < 120 Ω (fXtal > 30 MHz) 7
Shunt Capacitance COSCin 1 pF 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper For best soldering practices, the minimum trace length should extend to include the pin solder mask. This way during reflow, the solder has the same copper area as connected 11

CAD (KiCad official)

  • Symbol: LMK00105SQ
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lmk00105sq-etched.step / lmk00105sq-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmk00105sq.step / lmk00105sq.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 66e013120136f961, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF