component
AiP6150HSA8.TB
Public Made by Adomby adom
Wuxi I-core Elec Motor Driver ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAiP6150HSA8.TB
Wuxi I-core Elec · Motor Driver ICs · SOP-8
AiP6150HSA8.TB from Wuxi I-core Elec, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Logic and control supply, recommended 3V to 5.5V with absolute maximum 6V, internally independent of VM; when VCC is removed the circuit enters standby mode. |
| 2 | INA | input | Forward logic input; at VCC=5V the high-level threshold is at least 0.7*VCC and the low-level threshold is at most 0.6V, with about 106kΩ pull-down and 47uA typical high-level input current. |
| 3 | INB | input | Reverse logic input; at VCC=5V the high-level threshold is at least 0.7*VCC and the low-level threshold is at most 0.6V, with about 106kΩ pull-down and 47uA typical high-level input current. |
| 4 | VM | power_in | Motor power supply, 8V to 24V recommended with absolute maximum 30V, needing a local bulk decoupling capacitor C1 of at least 10uF (47uF or more recommended in application notes). |
| 5 | OUTB | output | Reverse-direction H-bridge output, driving high in reverse mode and low in forward and brake modes, with continuous output current of 0.45 to 0.55A and peak current limited to 1.5A. |
| 6 | AGND | power_in | Logic power ground for the control circuitry, which must be single-point connected with PGND as described in the application notes. |
| 7 | PGND | power_in | Power ground for the high-current path, which must connect directly and close to the negative terminal of the VM decoupling capacitor C1. |
| 8 | OUTA | output | Forward-direction H-bridge output, driving high in forward mode and low in reverse and brake modes, with continuous output current of 0.45 to 0.55A and peak current limited to 1.5A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi I-core Elec |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 最大逻辑控制电源电压 | VCC(MAX) | 6 | V | 6 | |||
| 最大功率电源电压 | VM(MAX) | 30 | V | 6 | |||
| 最大峰值输出电流 | IOUT(PEAK) | 1.5 | A | 6 | |||
| 最大功耗 | PD | 1 | W | 6 | |||
| 结到环境热阻 | θJAS | 123 | ℃/W | 6 | |||
| 工作温度范围 | Topr | -40 | 85 | ℃ | 6 | ||
| 结温 | TJ | 150 | ℃ | 6 | |||
| 储存温度 | Tstg | -55 | 150 | ℃ | 6 | ||
| 焊接温度 | TL | 250 | ℃ | 10秒 | 6 | ||
| ESD | ESD | 2000 | V | 6 | |||
| 逻辑和控制电源电压 | VCC | 3 | 5.5 | V | 6 | ||
| 功率电源电压 | VM | 8 | 24 | V | 6 | ||
| 推荐工作条件下芯片内部结温 | TJ | 125 | ℃ | 推荐工作条件下 | 6 | ||
| 输入低电平 | VINL | 0.6 | V | VCC=5V | 7 |
CAD (KiCad official)
- Symbol:
AiP6150HSA8.TB - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
aip6150hsa8-tb-etched.step/aip6150hsa8-tb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aip6150hsa8-tb.step/aip6150hsa8-tb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi I-core Elec datasheet (16 pp, sha256
d203d6d6ca374211, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).