component
TLC-PSMD150
Public Made by Adomby adom
TLC Electronic Resettable Fuses, 0805. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLC-PSMD150
TLC Electronic · Resettable Fuses · 0805
TLC-PSMD150 from TLC Electronic, in a 0805. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TLC Electronic |
| Package | 0805 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Tripping current (minimum current at which device trips) | IT | 3 | A | 25℃ still air | 1 | ||
| Holding current (maximum current at which device will not trip) | IH | 1.5 | A | 25℃ still air | 1 | ||
| Maximum voltage device can withstand without damage | Vmax | 6 | V | at rated current | 1 | ||
| Maximum fault current device can withstand without damage | Imax | 100 | A | at rated voltage | 1 | ||
| Maximum time to trip | Ttrip | 0.5 | S | at 8.0 A | 1 | ||
| Minimum resistance of device prior to trip | R min | 0.04 | Ω | 25℃ | 1 | ||
| Maximum resistance one hour post reflow | R1max | 0.16 | Ω | measured one hours post reflow at 25℃ | 1 | ||
| Rated working power | Pd | 0.6 | W | 1 | |||
| Average ramp-up rate (solder reflow) | 3 | ℃/second | Average ramp-up rate, reflow profile | 1 | |||
| Ramp-down rate (solder reflow) | 6 | ℃/second | Ramp-down rate, reflow profile | 1 | |||
| Maximum ambient operating temperature range | -40 | 85 | ℃ | Thermal derating table range (hold/trip current vs ambient) | 1 |
CAD (KiCad official)
- Symbol:
TLC-PSMD150 - Footprint:
Fuse:Fuse_0805_2012Metric - 3D model: 0805 (KiCad packages3D, STEP)
- 3D model files:
tlc-psmd150-etched.step/tlc-psmd150-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc-psmd150.step/tlc-psmd150.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TLC Electronic datasheet (1 pp, sha256
722ee79d3068f1e5, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).