component
MET1117A50B3G
Public Made by Adomby adom
MICRONE Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMET1117A50B3G
MICRONE · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-4
MET1117A50B3G from MICRONE, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground pin for the fixed-output MET1117AXX devices; the output is rated from Vss-0.3 V to VIN+0.3 V relative to this pin. |
| 2 | VOUT | power_out | Regulated output pin, rated for an output current of 850 mA maximum (absolute maximum ratings) and an output voltage of Vss-0.3 V to VIN+0.3 V. |
| 3 | VIN | power_in | Power input pin with an absolute maximum input voltage of 20 V; the device requires VIN of at least VOUT+1.5 V for specified regulation. |
| 4 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-223-4 |
| Category | Power Management (PMIC) |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 20 | V | 2 | |||
| Output Current | IOUT | 850 | mA | 2 | |||
| Power Dissipation | PD | 750 | mW | SOT223 | 2 | ||
| Operating Temperature Range | TOPR | -40 | 125 | ℃ | 2 | ||
| Storage Temperature Range | TSTG | -40 | 150 | ℃ | 2 | ||
| Junction Temperature Range | TJ | 0 | 150 | ℃ | 2 | ||
| Lead Temperature | 260 | ℃ | SOT223, 4 sec | 2 | |||
| Output Voltage | VOUT | 0.98 | 1.02 | × | IOUT=10mA,VIN=VOUT+1.5V; 10mA≤IOUT≤700mA; VOUT+1.5V≤VIN≤15V | 6 | |
| Load Regulation | ∆VOUT-LOAD | 35 | 50 | mV | VIN=VOUT+1.5V, 0mA≤IOUT≤700mA | 6 | |
| Dropout Voltage | VDIF1 | 1.08 | 1.1 | V | IOUT=100mA | 6 | |
| Dropout Voltage | VDIF2 | 1.2 | 1.3 | V | IOUT=500mA | 7 | |
| Dropout Voltage | VDIF3 | 1.45 | 1.5 | V | IOUT=700mA | 7 | |
| Dropout Voltage | VDIF4 | 1.65 | 1.7 | V | IOUT=800mA | 7 | |
| Quiescent Current | ISS | 3.5 | 10 | mA | VIN=VOUT+1.5V | 7 | |
| Line Regulation | ∆VOUT-LINE | 2 | 6 | mV | IOUT=10mA, VOUT+1.5V≤VIN≤20V | 7 | |
| Output Voltage | VOUT | 5 | V | IOUT=10mA,VIN=VOUT+1.5V; 10mA≤IOUT≤700mA; VOUT+1.5V≤VIN≤15V | 6 | ||
| Maximum Output Current | IOUTMAX | 700 | mA | VIN=VOUT+1.5V | 6 | ||
| Maximum Output Current | IOUTMAX | 800 | mA | VIN=VOUT+1.7V | 6 | ||
| Ripple Rejection Rate | PSRR | 65 | dB | VIN=12V+1Vp-pAC, IOUT=10mA, 1kHz | 7 | ||
| Ripple Rejection Rate | PSRR | 60 | dB | VIN=12V+1Vp-pAC, IOUT=100mA, 1kHz | 7 | ||
| Thermal Shutdown Junction Temperature | 160 | ℃ | 7 | ||||
| Current Limit | ILIMIT | 840 | mA | VIN=VOUT+1.7V | 7 | ||
| Thermal Resistance Junction-to-Case | 15 | °C/W | SOT223 | 2 | |||
| Thermal Resistance Junction-to-Ambient | 136 | °C/W | SOT223, no heat sink; no air flow | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro | 14 |
CAD (KiCad official)
- Symbol:
MET1117A50B3G - Footprint:
Package_TO_SOT_SMD:SOT-223 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
met1117a50b3g-etched.step/met1117a50b3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);met1117a50b3g.step/met1117a50b3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (14 pp, sha256
4844991954bd9733, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).