3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC2865HDE#TRPBF
Analog Devices · RS-485/RS-422 ICs · DFN-12-EP(3x4)
LTC2865HDE#TRPBF from Analog Devices, in a DFN-12-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver Output: if the receiver is enabled (RE low) and A-B > 200mV, RO is high; if A-B < -200mV, RO is low; if the inputs are open, shorted, or terminated without a signal, RO is high. |
| 2 | RE | input | Receiver Enable: a low input enables the receiver and a high input forces RO into high impedance; RE high with DE low puts the part into low power shutdown. |
| 3 | DE | input | Driver Enable: a high input enables the driver and a low input forces Y and Z into high impedance; DE low with RE high puts the part into low power shutdown. |
| 4 | DI | input | Driver Input: with the driver enabled, a low on DI forces Y low and Z high, and a high on DI forces Y high and Z low. |
| 5 | VL | power_in | Logic Supply: 1.65V ≤ VL ≤ VCC; bypass with 0.1µF ceramic capacitor; powers the RO, RE, DE, DI and SLO interfaces. |
| 6 | GND | power_in | Ground. |
| 7 | SLO | input | Slow Mode Enable: a low input switches the transmitter to the slew-rate-limited 250kbps max data rate mode, and a high input supports 20Mbps. |
| 8 | Y | output | Noninverting Driver Output; high impedance when the driver is disabled or unpowered. |
| 9 | Z | output | Inverting Driver Output; high impedance when the driver is disabled or unpowered. |
| 10 | B | input | Inverting Receiver Input; impedance is > 96kΩ in receive mode or when unpowered. |
| 11 | A | input | Noninverting Receiver Input; impedance is > 96kΩ in receive mode or when unpowered. |
| 12 | VCC | power_in | Power Supply: 3V < VCC < 5.5V; bypass with 0.1µF ceramic capacitor to GND. |
| 13 | EP (GND) | passive | Exposed pad; connect to PCB GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-12-EP(3x4) |
| Category | Interface ICs |
| Pins | 13 |
CAD (KiCad official)
- Symbol:
LTC2865HDE#TRPBF - Footprint:
Package_DFN_QFN:DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm - 3D model: DFN-12-EP(3x4) (KiCad packages3D, STEP)
- 3D model files:
ltc2865hde-trpbf-etched.step/ltc2865hde-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc2865hde-trpbf.step/ltc2865hde-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
156a32e263226c9f, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).