component

HT5534ARZ

Public Made by Adom

by adom

HTCSEMI Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiers-comparatorsht5534arzfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HT5534ARZ

HTCSEMI · Operational Amplifier · SOP-8

HT5534ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BALANCE passive Balance (offset adjust) terminal of the amplifier shown in the pin configuration diagram.
2 IN- input Inverting input; input voltage range is ±15V max (limited to the supply voltage when supply is below ±15V), differential input ±30V max.
3 IN+ input Non-inverting input; input voltage range is ±15V max (limited to the supply voltage when supply is below ±15V), differential input ±30V max.
4 VCC- power_in Negative supply; operating supply is ±2V to ±18V.
5 COMP passive Frequency compensation terminal of the amplifier.
6 OUT output Amplifier output, rated for ±50mA maximum output current.
7 VCC+ power_in Positive supply; operating supply is ±2V to ±18V.
8 COMP/BAL passive Combined compensation/balance terminal of the amplifier.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VIO 0.5 1 mV RS≤10kΩ 2
Input Offset Current IIO 5 200 nA 2
Input Bias Current IB 100 500 nA 2
Large Signal Voltage Gain AV 90 110 dB RL≥2kΩ,VO=±10V 2
Output Voltage Swing VOM 12 13.5 V RL≥2kΩ 2
Input Common Mode Voltage Range VICM 12 13.5 V 2
Common Mode Rejection Ratio CMR 80 110 dB RS≤10kΩ 2
Supply Voltage Rejection Ratio SVR 80 110 dB RS≤10kΩ 2
Operating Current ICC 6 9 mA 2
Slew Rate SR 5 V/µs RL≥2kΩ 2
Gain Bandwidth Product GB 10 MHz f=10kHz 2
Total Harmonic Distortion THD 0.0005 % AV=20dB,VO=5V,RL=2kΩ,f=1kHz 2
Input Noise Voltage VNI 0.8 µVrms RIAA,RS=2.2kΩ,30kHz LPF 2
Supply Voltage V+/V- -18 18 V Ta=25˚C 2
Input Voltage VIC -15 15 V Note: for supply voltage less than ±15V, the rating equals the supply voltage 2
Differential Input Voltage VID -30 30 V 2
Output Current IO -50 50 mA 2
Power Dissipation PD 300 mW SOP8 package 2
Operating Temperature Range Topr -40 85 ˚C 2
Storage Temperature Range Tstg -40 125 ˚C 2

CAD (KiCad official)

  • Symbol: HT5534ARZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ht5534arz-etched.step / ht5534arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht5534arz.step / ht5534arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (5 pp, sha256 4b00274023913864, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF