Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PI6CG33201CZDIEX-13R

Diodes Incorporated · Clock Generators, PLLs, Frequency Synthesizers · TQFN-24(4x4)

PI6CG33201CZDIEX-13R from Diodes Incorporated, in a TQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 XTAL_IN/CLK input Crystal input or CMOS reference input (25 MHz).
2 XTAL_OUT output Crystal output.
3 VDD_OSC power_in Power supply for oscillation circuit, nominal 3.3V.
4 SADR/REFOUT bidirectional CMOS latch to select SMBus address or LVCMOS REFOUT output; has an internal pull-down.
5 GND_REF power_in Ground for REFOUT.
6 GND_DIG power_in Ground for digital circuitry.
7 VDD_DIG power_in Power supply for digital circuitry, nominal 3.3V.
8 SCLK input CMOS SMBus clock input, 3.3V tolerant.
9 SDATA bidirectional CMOS SMBus data line, 3.3V tolerant.
10 GND power_in Ground pin.
11 VDD power_in Power supply, nominal 3.3V.
12 OE0# input Active low CMOS input enabling Q0 pair (1 = disable outputs, 0 = enable outputs); internal pull-down.
13 Q0+ output HCSL differential true clock output.
14 Q0- output HCSL differential complementary clock output.
15 GNDA power_in Ground for analog circuitry.
16 VDDA power_in Power supply for analog circuitry, nominal 3.3V per operating range.
17 Q1+ output HCSL differential true clock output.
18 Q1- output HCSL differential complementary clock output.
19 OE1# input Active low CMOS input enabling Q1 pair (1 = disable outputs, 0 = enable outputs); internal pull-down.
20 VDD power_in Power supply, nominal 3.3V.
21 GND power_in Ground pin.
22 PD# input CMOS input that samples latched inputs and starts up on first high assertion; low enters Power Down Mode; internal pull-up resistor.
23 SS_SEL_TRI input Tri-level latched input selecting spread at power up: 1 = 0.5% spread, M = spread off, 0 = spread off; internal pull-up and pull-down.
24 GND power_in Ground pin.
25 EPAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package TQFN-24(4x4)
Category Clock/Timing
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VDD 3.135 3.3 3.465 V VDD, VDDA, VDD_OSC, VDD_DIG 5
Ambient Temperature TA -40 85 °C Industrial grade 5
Analog Power Supply Current IDDA 22 25 mA All outputs active @100MHz 5
Power Supply Current IDD 24 30 mA All VDD, except VDDA, All outputs active @100MHz 5
Analog Wake-on-LAN Current IDDA_WL 0.5 1 mA Q outputs off, REF output running 5
Wake-on-LAN Current IDD_WL 3 6 mA All VDD, except VDDA, Q outputs off, REF output running 5
Analog Power Down Current IDDA_PD 0.5 1 mA All outputs off 5
Power Down Current IDD_PD 1 2 mA All outputs off 5
Storage Temperature -65 150 °C 5
Supply Voltage to Ground VDDxx -0.5 4.6 V 5
Input Voltage -0.5 4.6 V -0.5V to VDD+0.5V, not exceed 4.6V 5
SMBus Input High Voltage 3.6 V 5
Junction Temperature 125 °C 5
Thermal Resistance Junction to Ambient θJA 54.4 °C/W Still air 21
Thermal Resistance Junction to Case θJC 40.8 °C/W 21
SMBus Nominal Bus Voltage VDDSMB 2.7 3.6 V 6
SMBus Input High Voltage VIHSMB 2.1 3.6 V SMBus, VDDSMB = 3.3V 6
SMBus Input Low Voltage VILSMB 0.8 V SMBus, VDDSMB = 3.3V 6
SMBus Sink Current ISMBSINK 4 mA SMBus, at VOLSMB 6
SMBus Output Low Voltage VOLSMB 0.4 V SMBus, at ISMBSINK 6
SMBus Operating Frequency fMAXSMB 500 kHz Maximum frequency 6
SMBus Rise Time tRMSB 1000 ns (Max VIL - 0.15) to (Min VIH + 0.15) 6
SMBus Fall Time tFMSB 300 ns (Min VIH + 0.15) to (Max VIL - 0.15) 6
SS Modulation Frequency fMOD 30 31.8 33 kHz Triangular modulation 6
Input Low Voltage VIL -0.3 V Single-ended inputs, except SMBus 7
Input High Current IIH 5 µA Single-ended inputs, VIN = VDD 7
Input Low Current IIL -5 µA Single-ended inputs, VIN = 0V 7
Input High Current (pull up/down) IIH 50 µA Single-ended inputs with pull up / pull down resistor, VIN = VDD 7
Input Low Current (pull up/down) IIL -50 µA Single-ended inputs with pull up / pull down resistor, VIN = 0V 7
Input Capacitance CIN 1.5 5 pF 7
Clock Stabilization tSTAB 0.75 1 ms From Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock 7
PD# De-assertion tPDLAT 20 300 us Differential outputs enable after PD# de-assertion 7
REFOUT Duty Cycle tDC 45 50 55 % VT = VDD /2V, driven by a Xtal 8
REFOUT Duty Cycle Distortion tDCDIS -2 0 2 % VT = VDD /2V, driven by an external source 8
HCSL Output Voltage High VOH 660 784 850 mV Statistical measurement on single-ended signal using oscilloscope math function 8
HCSL Output Voltage Low VOL -150 150 mV 8
HCSL Output Cross Voltage VOC 250 430 550 mV 8
HCSL Slew Rate (fast setting) tRF 2.5 3.2 4 V/ns Scope averaging on fast setting 9
HCSL Slew Rate (slow setting) tRF 2.2 3 3.7 V/ns Scope averaging on slow setting 9
HCSL Duty Cycle tDC 45 50 55 % Measured differentially, PLL Mode 9
HCSL Output Skew tSKEW 20 50 ps Averaging on, VT = 50% 9
HCSL Cycle to Cycle Jitter tjc-c 20 50 ps 9

CAD (KiCad official)

  • Symbol: PI6CG33201CZDIEX-13R
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: TQFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: pi6cg33201czdiex-13r-etched.step / pi6cg33201czdiex-13r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pi6cg33201czdiex-13r.step / pi6cg33201czdiex-13r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (24 pp, sha256 22b76ea9fdcd5d89, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF