3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLP3852EMP-1.8
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-5
LP3852EMP-1.8 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown input; the datasheet states a shutdown input voltage range of -0.3 V to 7 V and that SD must be pulled high through a 10-kΩ pull-up resistor. |
| 2 | IN | input | Input supply pin with a supply range of 2.5 V to 7 V. |
| 3 | OUT | output | Regulated output voltage pin, with a maximum DC operating current of 1.5 A. |
| 4 | ERROR | output | ERROR flag output that goes low when the output voltage drops 10% below nominal; it must be pulled high through a 10-kΩ pull-up resistor or connected to ground if unused. |
| 5 | GND | power_in | Ground reference pin for the regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | VOUT | -1.5 | 0 | 1.5 | % | VOUT +1 V ≤ VIN ≤ 7 V; 10 mA ≤ IOUT ≤ 1.5 A | 6 |
| Output voltage tolerance over temperature | VOUT | -3 | 3 | % | For -40°C ≤ TJ ≤ 125°C | 6 | |
| Dropout voltage SOT (IOUT = 150 mA) | VIN - VOUT | 26 | 35 | mV | IOUT = 150mA | 6 | |
| Dropout voltage SOT over temperature (IOUT = 150 mA) | VIN - VOUT | 45 | mV | For -40°C ≤ TJ ≤ 125°C | 6 | ||
| Dropout voltage SOT (IOUT = 1.5 A) | VIN - VOUT | 260 | 320 | mV | IOUT = 1.5 A | 6 | |
| Dropout voltage SOT over temperature (IOUT = 1.5 A) | VIN - VOUT | 435 | mV | For -40°C ≤ TJ ≤ 125°C | 6 | ||
| Ground pin current in normal operation (IOUT = 150 mA) | IGND | 3 | 9 | mA | IOUT = 150 mA | 6 | |
| Ground pin current in normal operation over temperature (IOUT = 150 mA) | IGND | 10 | mA | For -40°C ≤ TJ ≤ 125°C | 6 | ||
| Ground pin current in normal operation (IOUT = 1.5 A) | IGND | 3 | 9 | mA | IOUT = 1.5 A | 6 | |
| Ground pin current in normal operation over temperature (IOUT = 1.5 A) | IGND | 10 | mA | For -40°C ≤ TJ ≤ 125°C | 6 | ||
| Ground pin current in shutdown mode | IGND | 0.01 | 10 | µA | VSD ≤ 0.3V | 6 | |
| Ground pin current in shutdown mode over temperature | IGND | 50 | µA | -40°C ≤ TJ ≤ 85°C | 6 | ||
| Peak output current | IOUT(PK) | 1.8 | A | VO ≥ VO(NOM), 4% | 6 | ||
| Shutdown threshold rising (output ON) over temperature | VSDT | 2 | V | Output = ON; For -40°C ≤ TJ ≤ 125°C | 6 | ||
| Shutdown threshold falling (output OFF) over temperature | VSDT | 0.3 | V | Output = OFF; For -40°C ≤ TJ ≤ 125°C | 6 | ||
| ERROR threshold | VT | 5 | 10 | 16 | % | For -40°C ≤ TJ ≤ 125°C (min/max); 10% typ | 6 |
| ERROR threshold hysteresis over temperature | VTH | 2 | 8 | % | For -40°C ≤ TJ ≤ 125°C | 6 | |
| ERROR pin saturation | VEF(Sat) | 0.02 | 0.1 | V | Isink = 100 µA; max for -40°C ≤ TJ ≤ 125°C | 7 | |
| Input supply voltage (survival) | VIN | -0.3 | 7.5 | V | 5 | ||
| Shutdown input voltage (survival) | VSD | -0.3 | 7.5 | V | 5 | ||
| Output voltage (survival) | VOUT | -0.3 | 6 | V | 5 | ||
| Lead temperature (soldering, 5 sec.) | 260 | °C | 5 sec soldering | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD human-body model | V(ESD) | -2000 | 2000 | V | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 5 | |
| Input supply voltage (recommended) | VIN | 2.5 | 7 | V | 5 | ||
| Shutdown input voltage (recommended) | VSD | -0.3 | 7 | V | 5 | ||
| Maximum operating current (DC) | IOUT | 1.5 | A | 5 | |||
| Junction temperature (operating) | TJ | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance (SOT-223, NDC) | RθJA | 65.2 | °C/W | High-K | 5 | ||
| Junction-to-case (top) thermal resistance (SOT-223, NDC) | RθJC(top) | 47.2 | °C/W | 5 | |||
| Junction-to-board thermal resistance (SOT-223, NDC) | RθJB | 9.9 | °C/W | 5 | |||
| Junction-to-top characterization parameter (SOT-223, NDC) | ψJT | 3.4 | °C/W | 5 | |||
| Junction-to-board characterization parameter (SOT-223, NDC) | ψJB | 9.7 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LP3852EMP-1.8 - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5 (KiCad packages3D, STEP)
- 3D model files:
lp3852emp-1-8-etched.step/lp3852emp-1-8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3852emp-1-8.step/lp3852emp-1-8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
70f996638bd5e2ad, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).