component
FZT855QTA
Public Made by Adomby adom
Diodes Incorporated Bipolar (BJT), SOT-223-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownFZT855QTA
Diodes Incorporated · Bipolar (BJT) · SOT-223-3
FZT855QTA from Diodes Incorporated, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | input | Base; the datasheet gives no base-current drive limit beyond continuous base current IB of 1A and emitter-base voltage VEBO of 7V maximum. |
| 2 | C | passive | Collector, also connected to the exposed tab; rated VCEO 150V, VCBO 250V, IC 5A continuous and ICM 10A peak. |
| 3 | E | passive | Emitter of the NPN transistor, normally connected to the lowest potential in the circuit; VEBO is 7V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223-3 |
| Category | Transistors/Thyristors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Breakdown Voltage | BVCBO | 250 | 375 | V | IC = 100µA | 4 | |
| Collector-Emitter Breakdown Voltage | BVCER | 250 | 375 | V | IC = 1µA, RB ≤ 1kΩ | 4 | |
| Collector-Emitter Breakdown Voltage | BVCEO | 150 | 180 | V | IC = 1mA | 4 | |
| Emitter-Base Breakdown Voltage | BVEBO | 7 | 8 | V | IE = 100µA | 4 | |
| Collector Cut-Off Current | ICBO | 50 | nA | VCB = 200V | 4 | ||
| Collector Cut-Off Current | ICBO | 1 | µA | VCB = 200V, @TA = +100°C | 4 | ||
| Emitter Cut-Off Current | IEBO | 10 | nA | VEB = 6V | 4 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | 20 | 40 | mV | IC = 100mA, IB = 5mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 35 | 65 | mV | IC = 500mA, IB = 50mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 60 | 110 | mV | IC = 1A, IB = 100mA | 4 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | 250 | 355 | mV | IC = 5A, IB = 500mA | 4 | |
| Base-Emitter Saturation Voltage | VBE(sat) | 1250 | mV | IC = 5A, IB = 500mA | 4 | ||
| Base-Emitter Turn-On Voltage | VBE(on) | 1100 | mV | IC = 5A, VCE = 5V | 4 | ||
| Collector-Base Voltage | VCBO | 250 | V | TA = +25°C | 2 | ||
| Collector-Emitter Voltage | VCEO | 150 | V | TA = +25°C | 2 | ||
| Emitter-Base Voltage | VEBO | 7 | V | TA = +25°C | 2 | ||
| Continuous Collector Current | IC | 5 | A | TA = +25°C | 2 | ||
| Peak Pulse Current | ICM | 10 | A | TA = +25°C | 2 | ||
| Base Current | IB | 1 | A | TA = +25°C | 2 | ||
| Power Dissipation | PD | 3 | W | Note 5: surface mounted on 52mm X 52mm FR4 PCB, 2oz copper, still air, TA = +25°C | 2 | ||
| Power Dissipation | PD | 1.6 | W | Note 6: 25mm x 25mm single sided 1oz copper, TA = +25°C | 2 | ||
| Linear Derating Factor | 24 | mW/°C | Note 5 | 2 | |||
| Linear Derating Factor | 12.8 | mW/°C | Note 6 | 2 | |||
| Thermal Resistance, Junction to Ambient | RθJA | 42 | °C/W | Note 5 | 2 | ||
| Thermal Resistance, Junction to Ambient | RθJA | 78 | °C/W | Note 6 | 2 | ||
| Thermal Resistance, Junction to Lead | RθJL | 8.8 | °C/W | Note 7: junction to solder-point (end of collector lead) | 2 | ||
| Operating and Storage Temperature Range | TJ, TSTG | -55 | 150 | °C | 2 | ||
| Electrostatic Discharge - Human Body Model | ESD HBM | 4000 | V | JEDEC Class 3A (Note 8) | 2 | ||
| Electrostatic Discharge - Machine Model | ESD MM | 400 | V | JEDEC Class C (Note 8) | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads. Solderable per MIL-STD-202, Method 208 | 1 |
CAD (KiCad official)
- Symbol:
FZT855QTA - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
fzt855qta-etched.step/fzt855qta-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fzt855qta.step/fzt855qta.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (8 pp, sha256
8e49dc3c6710b941, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).