Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

F280041PZSR

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)

F280041PZSR from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO28 bidirectional General-purpose I/O 28, multiplexed with SCIA_RX, EPWM7_A, EQEP1_A, SD1_D3 and ERRORSTS.
2 XRSn bidirectional Open-drain device reset input and watchdog reset output, requiring a 2.2kΩ to 10kΩ pull-up resistor to VDDIO.
3 VDDIO power_in 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor on each pin.
4 VDD power_in 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin.
5 VSS power_in Digital ground pin that must be connected to the board ground.
6 A6/PGA5_OF input ADC-A input 6, also PGA-5 output filter pin and CMPSS-5 comparator input.
7 B2/C6/PGA3_OF input ADC-B input 2 (also ADC-C input 6 and PGA-3 output filter pin).
8 B3/VDAC input ADC-B input 3, or optional external reference for the on-chip DAC; a 100pF capacitor to VSSA is always present on this pin.
9 A2/B6/PGA1_OF input ADC-A input 2 (also ADC-B input 6 and PGA-1 output filter pin).
10 A3 input ADC-A input 3, also a CMPSS-1 comparator input.
11 VDDA power_in 3.3V analog supply pin, requiring a minimum 2.2µF decoupling capacitor to VSSA on each pin.
12 VSSA power_in Analog ground pin.
13 PGA5_GND power_in Kelvin ground reference for PGA-5 input.
14 PGA1_GND power_in Kelvin ground reference for PGA-1 input.
15 PGA3_GND power_in Kelvin ground reference for PGA-3 input.
16 PGA5_IN input PGA-5 amplifier input, also a CMPSS-5 comparator input.
17 C4 input ADC-C input 4, also CMPSS-5 comparator inputs.
18 PGA1_IN input PGA-1 amplifier input, also a CMPSS-1 comparator input.
19 C0 input ADC-C input 0, also CMPSS-1 comparator inputs.
20 PGA3_IN input PGA-3 amplifier input, also a CMPSS-3 comparator input.
21 C2 input ADC-C input 2, also CMPSS-3 comparator inputs.
22 A1/DACB_OUT passive ADC-A input 1, also the buffered DAC-B output.
23 A0/B15/C15/DACA_OUT passive ADC-A input 0 (also ADC-B input 15, ADC-C input 15) and the buffered DAC-A output.
24 VREFHIB,VREFHIC bidirectional ADC-B and ADC-C high reference; a minimum 2.2µF capacitor is required between each and its low reference.
25 VREFHIA bidirectional ADC-A high reference; driven externally in external reference mode and by the device in internal reference mode, with at least 2.2µF placed on it.
26 VREFLOB,VREFLOC input ADC-B and ADC-C low reference pins.
27 VREFLOA input ADC-A low reference pin.
28 C5/PGA6_IN input ADC-C input 5, also the PGA-6 input and CMPSS-6 comparator input.
29 C1 input ADC-C input 1, also CMPSS-2 comparator inputs.
30 PGA2_IN input PGA-2 amplifier input, also a CMPSS-2 comparator input.
31 C3/PGA4_IN input ADC-C input 3, also the PGA-4 input and CMPSS-4 comparator inputs.
32 PGA2_GND,PGA4_GND,PGA6_GND power_in Shared Kelvin ground reference for PGA-2, PGA-4 and PGA-6.
33 VSSA power_in Analog ground pin.
34 VDDA power_in 3.3V analog supply pin, requiring a minimum 2.2µF decoupling capacitor to VSSA.
35 A5 input ADC-A input 5, also CMPSS-2 comparator inputs.
36 A4/B8/PGA2_OF input ADC-A input 4 (also ADC-B input 8 and PGA-2 output filter pin).
37 A8/PGA6_OF input ADC-A input 8, also PGA-6 output filter pin.
38 A9 input ADC-A input 9, also CMPSS-6 comparator inputs.
39 B4/C8/PGA4_OF input ADC-B input 4 (also ADC-C input 8 and PGA-4 output filter pin).
40 A10/B1/C10/PGA7_OF input ADC-A input 10 (also ADC-B input 1, ADC-C input 10 and PGA-7 output filter pin).
41 B0 input ADC-B input 0, also CMPSS-7 comparator inputs.
42 PGA7_GND power_in Kelvin ground reference for PGA-7 input.
43 PGA7_IN input PGA-7 amplifier input, also a CMPSS-7 comparator input.
44 C14 input ADC-C input 14, also CMPSS-7 comparator inputs.
45 VSS power_in Digital ground pin that must be connected to the board ground.
46 VDD power_in 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin.
47 VDDIO power_in 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor.
48 FLT2 bidirectional Flash test pin 2, reserved for TI and must be left unconnected.
49 FLT1 bidirectional Flash test pin 1, reserved for TI and must be left unconnected.
50 GPIO13 bidirectional General-purpose I/O 13, multiplexed with EPWM7_B, CANB_RX, EQEP1_INDEX, SCIB_RX and PMBUSA_ALERT.
51 GPIO12 bidirectional General-purpose I/O 12, multiplexed with EPWM7_A, CANB_TX, EQEP1_STROBE, SCIB_TX and PMBUSA_CTL.
52 GPIO11 bidirectional General-purpose I/O 11, multiplexed with EPWM6_B, SCIB_RX, EQEP1_B, OUTPUTXBAR7 and SPIA_STE.
53 GPIO33 bidirectional General-purpose I/O 33, multiplexed with I2CA_SCL, SPIB_STE, LINA_RX and CANA_RX.
54 GPIO16 bidirectional General-purpose I/O 16, multiplexed with SPIA_SIMO, CANB_TX, EPWM5_A, SCIA_TX and XCLKOUT.
55 GPIO17 bidirectional General-purpose I/O 17, multiplexed with SPIA_SOMI, CANB_RX, EPWM5_B, SCIA_RX and PMBUSA_SDA.
56 GPIO24 bidirectional General-purpose I/O 24, multiplexed with OUTPUTXBAR1, EQEP2_A, EPWM8_A, SPIB_SIMO and ERRORSTS.
57 GPIO25 bidirectional General-purpose I/O 25, multiplexed with OUTPUTXBAR2, EQEP2_B, SPIB_SOMI, SD1_C1 and PMBUSA_SDA.
58 GPIO26 bidirectional General-purpose I/O 26, multiplexed with OUTPUTXBAR3, EQEP2_INDEX, SPIB_CLK, SD1_D2 and I2CA_SDA.
59 GPIO27 bidirectional General-purpose I/O 27, multiplexed with OUTPUTXBAR4, EQEP2_STROBE, SPIB_STE, SD1_C2 and I2CA_SCL.
60 TCK input JTAG test clock input with an internal pull-up resistor.
61 GPIO37/TDO output General-purpose I/O 37, default function JTAG test data output (TDO), which is tri-stated when JTAG is inactive.
62 TMS bidirectional JTAG test mode select with an internal pull-up; an external 2.2kΩ pull-up to VDDIO is recommended.
63 GPIO35/TDI input General-purpose I/O 35, default function JTAG test data input (TDI); enable an internal or external pull-up to avoid a floating input.
64 GPIO32 bidirectional General-purpose I/O 32, multiplexed with I2CA_SDA, SPIB_CLK, EPWM8_B, LINA_TX and CANA_TX.
65 GPIO56 bidirectional General-purpose I/O 56, multiplexed with SPIA_CLK, EQEP2_STROBE, SCIB_TX, SD1_D3 and SPIB_SIMO.
66 GPIO57 bidirectional General-purpose I/O 57, multiplexed with SPIA_STE, EQEP2_INDEX, SCIB_RX, SD1_C3 and SPIB_SOMI.
67 GPIO58 bidirectional General-purpose I/O 58, multiplexed with OUTPUTXBAR1, SPIB_CLK, SD1_D4, LINA_TX and CANB_TX.
68 GPIO18_X2 bidirectional General-purpose I/O 18, usable only when INTOSC clocks the system and X1 has an external pull-down (about 1kΩ); also crystal oscillator output X2.
69 X1 bidirectional Crystal oscillator input or single-ended 3.3V clock input, which must be configured by software before the oscillator is enabled.
70 VDDIO power_in 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor.
71 VDD power_in 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin.
72 VSS power_in Digital ground pin that must be connected to the board ground.
73 VREGENZ input Internal regulator enable with internal pull-down; tie to VSS to enable the internal VREG or to VDDIO to use an external supply.
74 GPIO8 bidirectional General-purpose I/O 8, multiplexed with EPWM5_A, CANB_TX, ADCSOCAO, EQEP1_STROBE and I2CA_SCL.
75 GPIO4 bidirectional General-purpose I/O 4, multiplexed with EPWM3_A, OUTPUTXBAR3, CANA_TX and FSIRXA_CLK.
76 GPIO3 bidirectional General-purpose I/O 3, multiplexed with EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL, SPIA_CLK and SCIA_RX.
77 GPIO2 bidirectional General-purpose I/O 2, multiplexed with EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA, SCIA_TX and FSIRXA_D1.
78 GPIO1 bidirectional General-purpose I/O 1, multiplexed with EPWM1_B and I2CA_SCL.
79 GPIO0 bidirectional General-purpose I/O 0, multiplexed with EPWM1_A and I2CA_SDA.
80 VDDIO_SW power_in 3.3V supply for the internal DC/DC regulator, which requires a 20µF bulk input capacitor and must be connected to VDDIO.
81 GPIO23_VSW bidirectional General-purpose I/O 23, which is the internal DC/DC switch output (VSW) when DCDCEN is set.
82 VSS_SW power_in Internal DC/DC regulator ground that must be connected to VSS.
83 GPIO22_VFBSW bidirectional General-purpose I/O 22, which is the DC/DC feedback (VFBSW) pin by default when the internal regulator is used.
84 GPIO7 bidirectional General-purpose I/O 7, multiplexed with EPWM4_B, OUTPUTXBAR5, EQEP1_B, CANB_RX and SPIB_SIMO.
85 GPIO40 bidirectional General-purpose I/O 40, multiplexed with PMBUSA_SDA, FSIRXA_D0, SCIB_TX and EQEP1_A.
86 VSS power_in Digital ground pin that must be connected to the board ground.
87 VDD power_in 1.2V digital logic supply pin, requiring decoupling capacitance near each VDD pin.
88 VDDIO power_in 3.3V digital I/O supply pin, requiring a minimum 0.1µF decoupling capacitor.
89 GPIO5 bidirectional General-purpose I/O 5, multiplexed with EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE and FSITXA_D1.
90 GPIO9 bidirectional General-purpose I/O 9, multiplexed with EPWM5_B, SCIB_TX, OUTPUTXBAR6, SCIA_RX and SPIA_CLK.
91 GPIO39 bidirectional General-purpose I/O 39, multiplexed with CANB_RX and FSIRXA_CLK.
92 GPIO59 bidirectional General-purpose I/O 59, multiplexed with OUTPUTXBAR2, SPIB_STE, SD1_C4, LINA_RX and CANB_RX.
93 GPIO10 bidirectional General-purpose I/O 10, multiplexed with EPWM6_A, CANB_RX, ADCSOCBO, EQEP1_A and I2CA_SDA.
94 GPIO34 bidirectional General-purpose I/O 34, multiplexed with OUTPUTXBAR1 and PMBUSA_SDA.
95 GPIO15 bidirectional General-purpose I/O 15, multiplexed with EPWM8_B, SCIB_RX, OUTPUTXBAR4, PMBUSA_SCL and SPIB_STE.
96 GPIO14 bidirectional General-purpose I/O 14, multiplexed with EPWM8_A, SCIB_TX, OUTPUTXBAR3, PMBUSA_SDA and SPIB_CLK.
97 GPIO6 bidirectional General-purpose I/O 6, multiplexed with EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, CANB_TX and SPIB_SOMI.
98 GPIO30 bidirectional General-purpose I/O 30, multiplexed with CANA_RX, SPIB_SIMO, OUTPUTXBAR7, EQEP1_STROBE and SD1_D4.
99 GPIO31 bidirectional General-purpose I/O 31, multiplexed with CANA_TX, SPIB_SOMI, OUTPUTXBAR8, EQEP1_INDEX, SD1_C4 and FSIRXA_D1.
100 GPIO29 bidirectional General-purpose I/O 29, multiplexed with SCIA_TX, EPWM7_B, OUTPUTXBAR6, EQEP1_B, SD1_C3, LINA_RX, SPIB_STE and ERRORSTS.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-100(14x14)
Category Single Chip Microcomputer/Microcontroller
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDDIO supply voltage referenced to VSS VDDIO -0.3 4.6 V 以 VSS 为基准 59
VDDA supply voltage referenced to VSSA VDDA -0.3 4.6 V 以 VSSA 为基准 59
VDD supply voltage referenced to VSS VDD -0.3 1.5 V 以 VSS 为基准 59
Input voltage VIN -0.3 4.6 V (3.3V) 59
Output voltage VO -0.3 4.6 V 59
Digital input clamp current per pin IIK -20 20 mA VIN < VSS 或 VIN > VDDIO 59
Analog input clamp current per pin IIKANALOG -20 20 mA VIN < VSSA 或 VIN > VDDA 59
Digital output current per pin IOUT -20 20 mA 59
Natural ventilation operating temperature TA -40 125 °C 自然通风 59
Operating junction temperature TJ -40 150 °C 59
Storage temperature Tstg -65 150 °C 59
ESD human body model HBM V(ESD) -2000 2000 V HBM, JS-001, 100-pin PZ, S temperature range 59
ESD charged device model all pins V(ESD) -500 500 V CDM, JESD22-C101, 100-pin PZ 59
VDDIO and VDDA supply, internal BOR disabled VDDIO/VDDA 2.8 3.3 3.63 V 禁用内部 BOR 60
VDDIO and VDDA supply, internal BOR enabled VDDIO/VDDA 3.3 3.63 V 启用内部 BOR 60
Device supply voltage VDD VDD 1.14 1.2 1.32 V 60
Junction temperature S version TJ -40 125 °C S 版本 60
Low-level output voltage VOL 0.4 V IOL=IOL 最大值 68
Low-level output voltage VOL 0.2 V IOL = 100µA 68
High-level input voltage VIH 2 V (3.3V) 68
Low-level input voltage VIL 0.8 V (3.3V) 68
Input hysteresis VHYSTERESIS 150 mV 68
Internal regulator output VVREG 1.14 1.2 1.32 V 81
Crystal load capacitance CL1、CL2 12 24 pF 94
Internal oscillator frequency INTOSC1 and INTOSC2 fINTOSC 9.7 10 10.3 MHz INTOSC1 和 INTOSC2 95
INTOSC frequency stability over temperature and voltage fINTOSC-STABILITY -3 3 % 频率稳定性 96
INTOSC frequency stability at VDD, 30°C fINTOSC-STABILITY -0.2 0.2 % VDD 上的频率稳定性 30°C 96
INTOSC frequency stability at room temperature, nominal VDD fINTOSC-STABILITY -0.1 0.1 % 室温下的频率稳定性 30°C,标称 VDD 96
ADC clock frequency ADCCLK 5 50 MHz ADCCLK(源自 PERx.SYSCLK) 124
ADC conversion range internal reference 3.3V range VREFHI-VREFLO 0 3.3 V 内部基准电压 = 3.3V 范围 124
ADC conversion range internal reference 2.5V range VREFHI-VREFLO 0 2.5 V 内部基准电压 = 2.5V 范围 124
ADC gain error internal reference -45 45 LSB 内部基准电压 125
ADC gain error external reference -5 5 LSB 外部基准 125
ADC offset error -5 5 LSB 125
ADC channel-to-channel gain error -2 2 LSB 125
ADC-to-ADC gain error -4 4 LSB 所有 ADC 的 VREFHI 和 VREFLO 都相同 125
ADC differential nonlinearity DNL DNL -1 1 LSB 125
ADC integral nonlinearity INL INL -2 2 LSB 125
Buffered DAC output voltage range, RL 5kΩ VOUT 0.3 V RL = 5kΩ 137
Buffered DAC output voltage range, RL 1kΩ VOUT 0.6 V RL = 1kΩ 137
Buffered DAC load regulation -1 1 mV/V 137
Buffered DAC offset error -10 10 mV 中点 137
Buffered DAC gain error -2.5 2.5 FSR % 137
Buffered DAC DNL DNL -1 1 LSB 已更正端点 137
Buffered DAC INL INL -5 5 LSB 已更正端点 137
Buffered DAC voltage output slew rate 2.8 4.5 V/µs 从 0.3V 到 3V 转换的压摆率 137
Buffered DAC reference input resistance 160 200 240 kΩ VDAC 或 VREFHI 137
Comparator input-referred offset -20 20 mV 低共模,反相输入设置为 50mV 144
CMPSS DAC static offset error -25 25 mV 145
CMPSS DAC static gain error -2 2 FSR % 145
CMPSS DAC static DNL DNL -1 4 LSB 已更正端点 145
CMPSS DAC static INL INL -16 16 LSB 已更正端点 145
CMPSS DAC VDAC load VDAC load 6 8 10 kΩ 当 VDAC 为基准时 145
Junction-to-ambient thermal resistance high-k PCB RΘJA 46.1 °C/W 0 lfm 69
Junction-to-case thermal resistance RΘJC 7.6 °C/W 69

CAD (KiCad official)

  • Symbol: F280041PZSR
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: f280041pzsr-etched.step / f280041pzsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f280041pzsr.step / f280041pzsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (270 pp, sha256 f0eccdafc7ec75fa, retrieved 2026-11-02, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF