3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F1788-E/ML
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC16F1788-E from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2 | bidirectional | General purpose I/O multiplexed with AN2, C1-C4IN0+, DAC1OUT1, VREF- and DAC1VREF-. |
| 2 | RA3 | bidirectional | General purpose I/O multiplexed with AN3, VREF+, C1IN1+ and DAC1-4VREF+. |
| 3 | RA4 | bidirectional | General purpose I/O multiplexed with C1OUT, OPA1IN+, T0CKI and DAC4OUT1. |
| 4 | RA5 | bidirectional | General purpose I/O multiplexed with AN4, C2OUT, OPA1IN-, SS and DAC2OUT1. |
| 5 | VSS | power_in | Ground reference. |
| 6 | RA7 | bidirectional | General purpose I/O multiplexed with PSMC1-4CLK inputs, OSC1 crystal/resonator and CLKIN external clock input. |
| 7 | RA6 | bidirectional | General purpose I/O multiplexed with C2OUT, OSC2, CLKOUT (FOSC/4) and VCAP voltage regulator filter capacitor. |
| 8 | RC0 | bidirectional | General purpose I/O multiplexed with T1OSO, T1CKI and PSMC1 output A. |
| 9 | RC1 | bidirectional | General purpose I/O multiplexed with T1OSI, PSMC1 output B and CCP2. |
| 10 | RC2 | bidirectional | General purpose I/O multiplexed with PSMC1 output C, PSMC3 output B and CCP1. |
| 11 | RC3 | bidirectional | General purpose I/O multiplexed with PSMC1 output D, PSMC4 output A and SPI SCK/I2C SCL. |
| 12 | RC4 | bidirectional | General purpose I/O multiplexed with PSMC1 output E, PSMC4 output B and SPI SDI/I2C SDA. |
| 13 | RC5 | bidirectional | General purpose I/O multiplexed with PSMC1 output F, PSMC3 output A and SPI SDO. |
| 14 | RC6 | bidirectional | General purpose I/O multiplexed with PSMC2 output A, EUSART TX/CK and CCP3. |
| 15 | RC7 | bidirectional | General purpose I/O multiplexed with C4OUT, PSMC2 output B and EUSART RX/DT. |
| 16 | VSS | power_in | Ground reference. |
| 17 | VDD | power_in | Positive supply. |
| 18 | RB0 | bidirectional | General purpose I/O multiplexed with AN12, C2IN1+, PSMC1-4IN event trigger inputs, CCP1 and INT external interrupt. |
| 19 | RB1 | bidirectional | General purpose I/O multiplexed with AN10, C1-C4IN3- and OPA2OUT. |
| 20 | RB2 | bidirectional | General purpose I/O multiplexed with AN8, OPA2IN-, CLKR and DAC3OUT1. |
| 21 | RB3 | bidirectional | General purpose I/O multiplexed with AN9, C1-C3IN2-, OPA2IN+ and CCP2. |
| 22 | RB4 | bidirectional | General purpose I/O multiplexed with AN11, C3IN1+ and SS. |
| 23 | RB5 | bidirectional | General purpose I/O multiplexed with AN13, C4IN2-, T1G, CCP3, SDO and C3OUT. |
| 24 | RB6 | bidirectional | General purpose I/O multiplexed with C4IN1+, EUSART TX/CK, SPI SDI/I2C SDA and ICSPCLK serial programming clock. |
| 25 | RB7 | bidirectional | General purpose I/O multiplexed with DAC1-4OUT2, EUSART RX/DT, SPI SCK/I2C SCL and ICSPDAT ICSP data I/O. |
| 26 | RE3 | input | Input-only pin that functions as general purpose input, MCLR master clear with internal pull-up, or VPP programming voltage. |
| 27 | RA0 | bidirectional | General purpose I/O multiplexed with AN0, C1-C4IN0- and SS. |
| 28 | RA1 | bidirectional | General purpose I/O multiplexed with AN1, C1-C4IN1- and OPA1OUT. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 389 | |||
| Storage temperature | -65 | 150 | °C | 389 | |||
| Voltage on VDD pin, PIC16F1788/9 | VDD | -0.3 | 6.5 | V | with respect to VSS | 389 | |
| Voltage on MCLR pin | -0.3 | 9 | V | with respect to VSS | 389 | ||
| Maximum current on VSS pin | 350 | mA | -40°C ≤ TA ≤ +85°C | 389 | |||
| Maximum current on VSS pin | 120 | mA | -40°C ≤ TA ≤ +125°C | 389 | |||
| Maximum current on VDD pin (PIC16(L)F1788 only) | 250 | mA | -40°C ≤ TA ≤ +85°C | 389 | |||
| Maximum current on VDD pin (PIC16(L)F1788 only) | 85 | mA | -40°C ≤ TA ≤ +125°C | 389 | |||
| Current sunk by any I/O pin | 50 | mA | 389 | ||||
| Current sourced by any I/O pin | 50 | mA | 389 | ||||
| Current sourced by any Op Amp output pin | 100 | mA | 389 | ||||
| Clamp current | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 389 | |
| Total power dissipation | 800 | mW | 389 | ||||
| Supply voltage VDD, PIC16F1788/9 | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 392 | |
| Supply voltage VDD, PIC16F1788/9 | VDD | 2.5 | 5.5 | V | FOSC ≤ 32 MHz (Note 2) | 392 | |
| VDDMIN, PIC16F1788/9 | VDDMIN | 2.7 | V | 16 MHz < FOSC ≤ 32 MHz | 390 | ||
| Operating ambient temperature, Extended | TA | -40 | 125 | °C | Extended Temperature | 390 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 392 | ||
| Fixed Voltage Reference voltage | VFVR | -4 | 4 | % | 1.024V, VDD ≥ 2.5V | 392 | |
| Fixed Voltage Reference voltage | VFVR | -5 | 5 | % | 4.096V, VDD ≥ 4.75V | 392 | |
| VDD rise rate for internal POR | SVDD | 0.05 | V/ms | 392 | |||
| Supply current, LP mode | IDD | 20 | 74 | µA | VDD = 3.0V, FOSC = 32 kHz LP Oscillator mode, -40°C ≤ TA ≤ +85°C | 394 | |
| Supply current, XT mode | IDD | 380 | 1300 | µA | VDD = 5.0V, FOSC = 4 MHz XT Oscillator mode | 394 | |
| Supply current, EC high-power mode | IDD | 2.2 | 7.5 | mA | VDD = 5.0V, FOSC = 32 MHz EC High-Power mode | 395 | |
| Supply current, HFINTOSC | IDD | 1.4 | 4.1 | mA | VDD = 5.0V, FOSC = 16 MHz | 395 | |
| Base power-down current, Low-Power Sleep VREGPM = 1 | IPD | 0.5 | 6 | µA | VDD = 5.0V, max at +85°C; WDT, BOR, FVR, T1OSC disabled | 396 | |
| Base power-down current, Low-Power Sleep VREGPM = 1 | IPD | 0.5 | 15 | µA | VDD = 5.0V, max at +125°C; WDT, BOR, FVR, T1OSC disabled | 396 | |
| Base power-down current, VREGPM = 0 | IPD | 12 | 21 | µA | VDD = 5.0V, max at +85°C; WDT, BOR, FVR, T1OSC disabled | 396 | |
| Input low voltage, TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 398 | ||
| Input high voltage, TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 398 | ||
| Input high voltage, SMBus levels | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 398 | ||
| Input leakage current, I/O ports | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance @ 125°C | 398 |
| Weak pull-up current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 398 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8mA, VDD = 5V | 398 | ||
| I/O pin capacitive load | CIO | 50 | pF | All I/O pins | 399 | ||
| Brown-out Reset voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 408 |
| Brown-out Reset voltage | VBOR | 2.3 | 2.45 | 2.6 | V | BORV = 1 (F device) | 408 |
| Internal calibrated HFINTOSC frequency | HFOSC | -5 | 5 | % | 16.0 MHz, -40°C ≤ TA ≤ +125°C | 404 | |
| ADC resolution | NR | 12 | bit | 411 | |||
| ADC reference voltage | VREF | 1.8 | V | VREF = (VREF+ minus VREF-) | 411 | ||
| Thermal resistance junction to ambient | θJA | 27.5 | °C/W | 28-pin QFN 6x6mm package | 401 | ||
| Thermal resistance junction to case | θJC | 24 | °C/W | 28-pin QFN 6x6mm package | 401 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 401 |
CAD (KiCad official)
- Symbol:
PIC16F1788-E - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic16f1788-e-etched.step/pic16f1788-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1788-e.step/pic16f1788-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (474 pp, sha256
8e6c12f3283097f2, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F1788-E/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F1788-E/SS