3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC32MZ2048EFM100-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-100(12x12)
PIC32MZ2048EFM100-I from Microchip Tech, in a TQFP-100(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AN23/AERXERR/RG15 | bidirectional | PORTG I/O RG15 shared with analog input AN23 and alternate Ethernet receive error input AERXERR. |
| 2 | EBIA5/AN34/PMA5/RA5 | bidirectional | PORTA I/O RA5 shared with analog input AN34, EBI address bit 5 and PMP address bit 5. |
| 3 | EBID5/AN17/RPE5/PMD5/RE5 | bidirectional | PORTE I/O RE5 shared with analog input AN17, EBI data bit 5, PMP data bit 5 and remappable pin RPE5. |
| 4 | EBID6/AN16/PMD6/RE6 | bidirectional | PORTE I/O RE6 shared with analog input AN16, EBI data bit 6 and PMP data bit 6. |
| 5 | EBID7/AN15/PMD7/RE7 | bidirectional | PORTE I/O RE7 shared with analog input AN15, EBI data bit 7 and PMP data bit 7. |
| 6 | EBIA6/AN22/RPC1/PMA6/RC1 | bidirectional | PORTC I/O RC1 shared with analog input AN22, EBI/PMP address bit 6 and remappable pin RPC1. |
| 7 | EBIA12/AN21/RPC2/PMA12/RC2 | bidirectional | PORTC I/O RC2 shared with analog input AN21, EBI/PMP address bit 12 and remappable pin RPC2. |
| 8 | EBIWE/AN20/RPC3/PMWR/RC3 | bidirectional | PORTC I/O RC3 shared with analog input AN20, EBI write enable, PMP write strobe and remappable pin RPC3. |
| 9 | EBIOE/AN19/RPC4/PMRD/RC4 | bidirectional | PORTC I/O RC4 shared with analog input AN19, EBI output enable, PMP read strobe and remappable pin RPC4. |
| 10 | AN14/C1IND/ECOL/RPG6/SCK2/RG6 | bidirectional | PORTG I/O RG6 shared with analog input AN14, comparator 1 input D, Ethernet collision detect, SPI2 clock and remappable pin RPG6. |
| 11 | EBIA4/AN13/C1INC/ECRS/RPG7/SDA4/PMA4/RG7 | bidirectional | PORTG I/O RG7 shared with analog input AN13, comparator 1 input C, Ethernet carrier sense, I2C4 data, EBI/PMP address bit 4 and remappable pin RPG7. |
| 12 | EBIA3/AN12/C2IND/ERXDV/ECRSDV/AERXDV/AECRSDV/RPG8/SCL4/PMA3/RG8 | bidirectional | PORTG I/O RG8 shared with analog input AN12, comparator 2 input D, Ethernet receive data valid/carrier sense (MII/RMII, normal and alternate), I2C4 clock, EBI/PMP address bit 3 and remappable pin RPG8. |
| 13 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 14 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 15 | MCLR | input | Master Clear active-low Reset input, also used for device programming and debugging. |
| 16 | EBIA2/AN11/C2INC/ERXCLK/EREFCLK/AERXCLK/AEREFCLK/RPG9/PMA2/RG9 | bidirectional | PORTG I/O RG9 shared with analog input AN11, comparator 2 input C, Ethernet receive/reference clock (normal and alternate), EBI/PMP address bit 2 and remappable pin RPG9. |
| 17 | TMS/EBIA16/AN24/RA0 | bidirectional | PORTA I/O RA0 shared with JTAG test mode select input TMS, analog input AN24 and EBI address bit 16. |
| 18 | AN25/AERXD0/RPE8/RE8 | bidirectional | PORTE I/O RE8 shared with analog input AN25, alternate Ethernet receive data 0 and remappable pin RPE8. |
| 19 | AN26/AERXD1/RPE9/RE9 | bidirectional | PORTE I/O RE9 shared with analog input AN26, alternate Ethernet receive data 1 and remappable pin RPE9. |
| 20 | AN45/C1INA/RPB5/RB5 | bidirectional | PORTB I/O RB5 shared with analog input AN45, comparator 1 positive input C1INA and remappable pin RPB5. |
| 21 | AN4/C1INB/RB4 | bidirectional | PORTB I/O RB4 shared with analog input AN4 and comparator 1 negative input B. |
| 22 | AN3/C2INA/RPB3/RB3 | bidirectional | PORTB I/O RB3 shared with analog input AN3, comparator 2 positive input C2INA and remappable pin RPB3. |
| 23 | AN2/C2INB/RPB2/RB2 | bidirectional | PORTB I/O RB2 shared with analog input AN2, comparator 2 negative input B and remappable pin RPB2. |
| 24 | PGEC1/AN1/RPB1/RB1 | bidirectional | PORTB I/O RB1 shared with programming/debugging clock channel 1 (PGEC1), analog input AN1 and remappable pin RPB1. |
| 25 | PGED1/AN0/RPB0/RB0 | bidirectional | PORTB I/O RB0 shared with programming/debugging data channel 1 (PGED1), analog input AN0 and remappable pin RPB0. |
| 26 | PGEC2/AN46/RPB6/RB6 | bidirectional | PORTB I/O RB6 shared with programming/debugging clock channel 2 (PGEC2), analog input AN46 and remappable pin RPB6. |
| 27 | PGED2/AN47/RPB7/RB7 | bidirectional | PORTB I/O RB7 shared with programming/debugging data channel 2 (PGED2), analog input AN47 and remappable pin RPB7. |
| 28 | VREF-/CVREF-/AN27/AERXD2/RA9 | power_in | PORTA I/O RA9 shared with analog voltage reference (low) input VREF-, comparator reference low input CVREF-, analog input AN27 and alternate Ethernet receive data 2. |
| 29 | VREF+/CVREF+/AN28/AERXD3/RA10 | power_in | PORTA I/O RA10 shared with analog voltage reference (high) input VREF+, comparator reference high input CVREF+, analog input AN28 and alternate Ethernet receive data 3. |
| 30 | AVDD | power_in | Positive supply for analog modules; must be connected at all times, even if ADC is not used. |
| 31 | AVSS | power_in | Ground reference for analog modules; must be connected at all times. |
| 32 | EBIA10/AN48/RPB8/PMA10/RB8 | bidirectional | PORTB I/O RB8 shared with analog input AN48, EBI/PMP address bit 10 and remappable pin RPB8. |
| 33 | EBIA7/AN49/RPB9/PMA7/RB9 | bidirectional | PORTB I/O RB9 shared with analog input AN49, EBI/PMP address bit 7 and remappable pin RPB9. |
| 34 | EBIA13/CVREFOUT/AN5/RPB10/PMA13/RB10 | bidirectional | PORTB I/O RB10 shared with comparator voltage reference output CVREFOUT, analog input AN5, EBI/PMP address bit 13 and remappable pin RPB10. |
| 35 | AN6/ERXERR/AETXERR/RB11 | bidirectional | PORTB I/O RB11 shared with analog input AN6, Ethernet receive error input and alternate Ethernet transmit error output. |
| 36 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 37 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 38 | TCK/EBIA19/AN29/RA1 | bidirectional | PORTA I/O RA1 shared with JTAG test clock input TCK, analog input AN29 and EBI address bit 19. |
| 39 | TDI/EBIA18/AN30/RPF13/SCK5/RF13 | bidirectional | PORTF I/O RF13 shared with JTAG test data input TDI, analog input AN30, EBI address bit 18, SPI5 clock and remappable pin RPF13. |
| 40 | TDO/EBIA17/AN31/RPF12/RF12 | bidirectional | PORTF I/O RF12 shared with JTAG test data output TDO, analog input AN31, EBI address bit 17 and remappable pin RPF12. |
| 41 | EBIA11/AN7/ERXD0/AECRS/PMA11/RB12 | bidirectional | PORTB I/O RB12 shared with analog input AN7, Ethernet receive data 0, alternate Ethernet carrier sense and EBI/PMP address bit 11. |
| 42 | AN8/ERXD1/AECOL/RB13 | bidirectional | PORTB I/O RB13 shared with analog input AN8, Ethernet receive data 1 and alternate Ethernet collision detect. |
| 43 | EBIA1/AN9/ERXD2/AETXD3/RPB14/SCK3/PMA1/RB14 | bidirectional | PORTB I/O RB14 shared with analog input AN9, Ethernet receive data 2, alternate Ethernet transmit data 3, SPI3 clock, EBI/PMP address bit 1 and remappable pin RPB14. |
| 44 | EBIA0/AN10/ERXD3/AETXD2/RPB15/OCFB/PMA0/RB15 | bidirectional | PORTB I/O RB15 shared with analog input AN10, Ethernet receive data 3, alternate Ethernet transmit data 2, Output Compare Fault B input, EBI/PMP address bit 0 and remappable pin RPB15. |
| 45 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 46 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 47 | AN32/AETXD0/RPD14/RD14 | bidirectional | PORTD I/O RD14 shared with analog input AN32, alternate Ethernet transmit data 0 and remappable pin RPD14. |
| 48 | AN33/AETXD1/RPD15/SCK6/RD15 | bidirectional | PORTD I/O RD15 shared with analog input AN33, alternate Ethernet transmit data 1, SPI6 clock and remappable pin RPD15. |
| 49 | OSC1/CLKI/RC12 | input | Oscillator crystal input / external clock source input (ST buffer in RC mode, CMOS otherwise), shared with PORTC I/O RC12. |
| 50 | OSC2/CLKO/RC15 | output | Oscillator crystal output; connects to crystal or resonator, or optionally functions as CLKO in RC and EC modes, shared with PORTC I/O RC15. |
| 51 | VBUS | power_in | USB bus power monitor analog input. |
| 52 | VUSB3V3 | power_in | USB internal transceiver supply; must be connected to VSS if the USB module is not used, which disables the shared USBID function. |
| 53 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 54 | D- | bidirectional | USB D- analog data line. |
| 55 | D+ | bidirectional | USB D+ analog data line. |
| 56 | RPF3/USBID/RF3 | bidirectional | PORTF I/O RF3 shared with USB OTG ID detect input and remappable pin RPF3. |
| 57 | EBIRDY3/RPF2/SDA3/RF2 | bidirectional | PORTF I/O RF2 shared with EBI ready input 3, I2C3 data and remappable pin RPF2. |
| 58 | EBIRDY2/RPF8/SCL3/RF8 | bidirectional | PORTF I/O RF8 shared with EBI ready input 2, I2C3 clock and remappable pin RPF8. |
| 59 | EBICS0/SCL2/RA2 | bidirectional | PORTA I/O RA2 shared with EBI chip select 0 and I2C2 clock. |
| 60 | EBIRDY1/SDA2/RA3 | bidirectional | PORTA I/O RA3 shared with EBI ready input 1 and I2C2 data. |
| 61 | EBIA14/PMCS1/PMA14/RA4 | bidirectional | PORTA I/O RA4 shared with EBI address bit 14, PMP chip select 1 and PMP address bit 14. |
| 62 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 63 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 64 | EBIA9/RPF4/SDA5/PMA9/RF4 | bidirectional | PORTF I/O RF4 shared with EBI/PMP address bit 9, I2C5 data and remappable pin RPF4. |
| 65 | EBIA8/RPF5/SCL5/PMA8/RF5 | bidirectional | PORTF I/O RF5 shared with EBI/PMP address bit 8, I2C5 clock and remappable pin RPF5. |
| 66 | AETXCLK/RPA14/SCL1/RA14 | bidirectional | PORTA I/O RA14 shared with alternate Ethernet transmit clock, I2C1 clock and remappable pin RPA14. |
| 67 | AETXEN/RPA15/SDA1/RA15 | bidirectional | PORTA I/O RA15 shared with alternate Ethernet transmit enable, I2C1 data and remappable pin RPA15. |
| 68 | EBIA15/RPD9/PMCS2/PMA15/RD9 | bidirectional | PORTD I/O RD9 shared with EBI/PMP address bit 15, PMP chip select 2 and remappable pin RPD9. |
| 69 | RPD10/SCK4/RD10 | bidirectional | PORTD I/O RD10 shared with SPI4 clock and remappable pin RPD10. |
| 70 | EMDC/AEMDC/RPD11/RD11 | bidirectional | PORTD I/O RD11 shared with Ethernet management data clock (normal and alternate) and remappable pin RPD11. |
| 71 | EMDIO/AEMDIO/RPD0/RTCC/INT0/RD0 | bidirectional | PORTD I/O RD0 shared with Ethernet management data (normal and alternate), RTCC alarm/seconds output, external interrupt 0 and remappable pin RPD0. |
| 72 | SOSCI/RPC13/RC13 | input | 32.768 kHz low-power secondary oscillator crystal input, shared with PORTC I/O RC13 and remappable pin RPC13. |
| 73 | SOSCO/RPC14/T1CK/RC14 | output | 32.768 kHz low-power secondary oscillator crystal output, shared with Timer1 external clock input, PORTC I/O RC14 and remappable pin RPC14. |
| 74 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 75 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 76 | RPD1/SCK1/RD1 | bidirectional | PORTD I/O RD1 shared with SPI1 clock and remappable pin RPD1. |
| 77 | EBID14/ETXEN/RPD2/PMD14/RD2 | bidirectional | PORTD I/O RD2 shared with EBI data bit 14, Ethernet transmit enable, PMP data bit 14 and remappable pin RPD2. |
| 78 | EBID15/ETXCLK/RPD3/PMD15/RD3 | bidirectional | PORTD I/O RD3 shared with EBI data bit 15, Ethernet transmit clock, PMP data bit 15 and remappable pin RPD3. |
| 79 | EBID12/ETXD2/RPD12/PMD12/RD12 | bidirectional | PORTD I/O RD12 shared with EBI data bit 12, Ethernet transmit data 2, PMP data bit 12 and remappable pin RPD12. |
| 80 | EBID13/ETXD3/PMD13/RD13 | bidirectional | PORTD I/O RD13 shared with EBI data bit 13, Ethernet transmit data 3 and PMP data bit 13. |
| 81 | SQICS0/RPD4/RD4 | bidirectional | PORTD I/O RD4 shared with SQI chip select 0 output and remappable pin RPD4. |
| 82 | SQICS1/RPD5/RD5 | bidirectional | PORTD I/O RD5 shared with SQI chip select 1 output and remappable pin RPD5. |
| 83 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 84 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 85 | EBID11/ETXD1/RPF0/PMD11/RF0 | bidirectional | PORTF I/O RF0 shared with EBI data bit 11, Ethernet transmit data 1, PMP data bit 11 and remappable pin RPF0. |
| 86 | EBID10/ETXD0/RPF1/PMD10/RF1 | bidirectional | PORTF I/O RF1 shared with EBI data bit 10, Ethernet transmit data 0, PMP data bit 10 and remappable pin RPF1. |
| 87 | EBID9/ETXERR/RPG1/PMD9/RG1 | bidirectional | PORTG I/O RG1 shared with EBI data bit 9, Ethernet transmit error, PMP data bit 9 and remappable pin RPG1. |
| 88 | EBID8/RPG0/PMD8/RG0 | bidirectional | PORTG I/O RG0 shared with EBI data bit 8, PMP data bit 8 and remappable pin RPG0. |
| 89 | TRCLK/SQICLK/RA6 | bidirectional | PORTA I/O RA6 shared with trace clock output and SQI clock output. |
| 90 | TRD3/SQID3/RA7 | bidirectional | PORTA I/O RA7 shared with trace data bit 3 and SQI data 3. |
| 91 | EBID0/PMD0/RE0 | bidirectional | PORTE I/O RE0 shared with EBI data bit 0 and PMP data bit 0. |
| 92 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 93 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 94 | EBID1/PMD1/RE1 | bidirectional | PORTE I/O RE1 shared with EBI data bit 1 and PMP data bit 1. |
| 95 | TRD2/SQID2/RG14 | bidirectional | PORTG I/O RG14 shared with trace data bit 2 and SQI data 2. |
| 96 | TRD1/SQID1/RG12 | bidirectional | PORTG I/O RG12 shared with trace data bit 1 and SQI data 1. |
| 97 | TRD0/SQID0/RG13 | bidirectional | PORTG I/O RG13 shared with trace data bit 0 and SQI data 0. |
| 98 | EBID2/PMD2/RE2 | bidirectional | PORTE I/O RE2 shared with EBI data bit 2 and PMP data bit 2. |
| 99 | EBID3/RPE3/PMD3/RE3 | bidirectional | PORTE I/O RE3 shared with EBI data bit 3, PMP data bit 3 and remappable pin RPE3. |
| 100 | EBID4/AN18/PMD4/RE4 | bidirectional | PORTE I/O RE4 shared with analog input AN18, EBI data bit 4 and PMP data bit 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-100(12x12) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VDD | 2.1 | 3.6 | V | -40°C to +85°C, DC to 252 MHz | 1 | |
| Operating temperature (industrial) | TA | -40 | 85 | °C | 2.1V to 3.6V, DC to 252 MHz | 1 | |
| CPU frequency (industrial) | 0 | 252 | MHz | 2.1V to 3.6V, -40°C to +85°C | 1 | ||
| Operating temperature (extended) | TA | -40 | 125 | °C | 2.1V to 3.6V, DC to 180 MHz | 1 | |
| CPU frequency (extended) | 0 | 180 | MHz | 2.1V to 3.6V, -40°C to +125°C | 1 | ||
| 5V-tolerant pin input voltage | 5.5 | V | VDD >= 2.1V | 51 | |||
| 5V-tolerant pin voltage relative to VSS during power up/down | 3.2 | V | VDD < 2.1V | 51 | |||
| Temperature sensor accuracy | -2 | 2 | ºC | 1 | |||
| I/O pin source/sink current | 32 | mA | 5V-tolerant pins, up to 32 mA source/sink | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | CLR or INV register, the base register must be read. 12.4 Peripheral Pin Select (PPS) | 261 |
CAD (KiCad official)
- Symbol:
PIC32MZ2048EFM100-I - Footprint:
Package_QFP:TQFP-100_12x12mm_P0.4mm - 3D model: TQFP-100(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic32mz2048efm100-i-etched.step/pic32mz2048efm100-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mz2048efm100-i.step/pic32mz2048efm100-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (760 pp, sha256
735501a915a04025, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).