Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV9361IDCKR

Texas Instruments · Operational Amplifier · SC-70-5

TLV9361IDCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Noninverting input; the common-mode range is (V-) to (V+) - 2 V, and the input current is limited to ±10 mA.
2 V- power_in Negative (lowest) power supply; the device operates from (V+) - (V-) = 4.5 V to 40 V.
3 IN- input Inverting input; the common-mode range is (V-) to (V+) - 2 V, and the input current is limited to ±10 mA.
4 OUT output Output with rail-to-rail swing, ±60 mA short-circuit current, and continuous short-circuit to ground (one amplifier per package).
5 V+ power_in Positive (highest) power supply; the absolute maximum supply voltage is 42 V, and the recommended maximum is 40 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 0 42 V 6
Signal input current -10 10 mA 6
Operating ambient temperature TA -55 150 °C 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Supply voltage, (V+) - (V-) VS 4.5 40 V 6
Specified temperature TA -40 125 °C 6
Input offset voltage VOS -1.7 0.4 1.7 mV VCM = V- 8
Input offset voltage over temperature VOS -2 2 mV TA = -40°C to 125°C 8
Input offset voltage versus power supply PSRR -7.5 1.5 7.5 μV/V VCM = V-, VS = 5 V to 40 V; TA = -40°C to 125°C 8
Common-mode rejection ratio CMRR 95 110 dB VS = 40 V, V- < VCM < (V+), 2 V, TA = -40°C to 125°C 8
Common-mode rejection ratio CMRR 75 85 dB VS = 5 V, V- < VCM < (V+), 2 V 8
Open-loop voltage gain AOL 115 130 dB VS = 40 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V 8
Open-loop voltage gain AOL 130 dB VS = 40 V, VCM = VS / 2, (V-) + 0.12 V < VO < (V+), 0.12 V, TA = -40°C to 125°C 8
Open-loop voltage gain AOL 100 120 dB VS = 5 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V 8
Open-loop voltage gain AOL 120 dB VS = 5 V, VCM = VS / 2, (V-) + 0.1 V < VO < (V+), 0.1 V, TA = -40°C to 125°C 8
Positive and negative rail headroom (output swing from rail) 60 100 mV VS = 40 V, RL = 10 kΩ 9
Positive and negative rail headroom (output swing from rail) 250 400 mV VS = 40 V, RL = 2 kΩ 9
Short-circuit current ISC -60 60 mA 9
Quiescent current per amplifier IQ 2.6 3 mA IO = 0 A 9
Quiescent current per amplifier IQ 3.2 mA TA = -40°C to 125°C 9
Junction-to-ambient thermal resistance (DCK, SC70 5-pin) RθJA 198.1 °C/W DCK (SC70) 5-pin package 6
Junction-to-case (top) thermal resistance (DCK, SC70 5-pin) RθJC(top) 94.1 °C/W DCK (SC70) 5-pin package 6
Junction-to-board thermal resistance (DCK, SC70 5-pin) RθJB 45.3 °C/W DCK (SC70) 5-pin package 6
Junction-to-top characterization parameter (DCK, SC70 5-pin) ψJT 16.9 °C/W DCK (SC70) 5-pin package 6
Junction-to-board characterization parameter (DCK, SC70 5-pin) ψJB 45 °C/W DCK (SC70) 5-pin package 6

CAD (KiCad official)

  • Symbol: TLV9361IDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tlv9361idckr-etched.step / tlv9361idckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv9361idckr.step / tlv9361idckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 5318f2de9dd27b6e, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF