3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownOPA192QDGKRQ1
Texas Instruments · Precision OpAmps · VSSOP-8
OPA192QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the pin can be left floating. |
| 2 | -IN | input | Inverting input of the amplifier. |
| 3 | +IN | input | Noninverting input of the amplifier. |
| 4 | V- | power_in | Negative (lowest) power supply pin. |
| 5 | NC | unconnected | No internal connection; the pin can be left floating. |
| 6 | OUT | output | Amplifier output; per the datasheet, e-trim communication also occurs on this output pin, and it is permanently disabled after trim. |
| 7 | V+ | power_in | Positive (highest) power supply pin. |
| 8 | NC | unconnected | No internal connection; the pin can be left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -25 | 5 | 25 | µV | 7 | |
| Input offset voltage | VOS | -50 | 8 | 50 | µV | TA = 0°C to 85°C | 7 |
| Input offset voltage | VOS | -75 | 10 | 75 | µV | TA = -40°C to 125°C | 7 |
| Input offset voltage | VOS | -40 | 10 | 40 | µV | VCM = (V+), 1.5 V | 7 |
| Input offset voltage | VOS | -150 | 25 | 150 | µV | TA = 0°C to 85°C | 7 |
| Input offset voltage | VOS | -250 | 50 | 250 | µV | TA = -40°C to 125°C | 7 |
| Input offset voltage drift | dVOS/dT | -0.8 | 0.1 | 0.8 | µV/°C | TA = 0°C to 85°C | 7 |
| Input offset voltage drift | dVOS/dT | -1 | 0.2 | 1 | µV/°C | TA = -40°C to 125°C | 7 |
| Power-supply rejection ratio | PSRR | -1 | 0.3 | 1 | µV/V | TA = -40°C to 125°C | 7 |
| Input bias current | IB | -20 | 5 | 20 | pA | 7 | |
| Input bias current | IB | -5 | 5 | nA | TA = -40°C to 125°C | 7 | |
| Input offset current | IOS | -20 | 2 | 20 | pA | 7 | |
| Input offset current | IOS | -2 | 2 | nA | TA = -40°C to 125°C | 7 | |
| Common-mode rejection ratio | CMRR | 120 | 140 | dB | (V-), 0.1 V < VCM < (V+), 3 V | 7 | |
| Common-mode rejection ratio | CMRR | 114 | 126 | dB | TA = -40°C to 125°C | 7 | |
| Common-mode rejection ratio | CMRR | 100 | 120 | dB | (V+), 1.5 V < VCM < (V+) | 7 | |
| Common-mode rejection ratio | CMRR | 86 | 100 | dB | TA = -40°C to 125°C | 7 | |
| Open-loop voltage gain | AOL | 120 | 134 | dB | (V-) + 0.6 V < VO < (V+), 0.6 V, RLOAD = 2 kΩ | 7 | |
| Open-loop voltage gain | AOL | 114 | 126 | dB | TA = -40°C to 125°C | 7 | |
| Open-loop voltage gain | AOL | 126 | 140 | dB | (V-) + 0.3 V < VO < (V+), 0.3 V, RLOAD = 10 kΩ | 7 | |
| Output voltage swing from rail | VO | 5 | 15 | mV | Positive rail; No load | 8 | |
| Output voltage swing from rail | VO | 95 | 110 | mV | Positive rail; RLOAD = 10 kΩ | 8 | |
| Output voltage swing from rail | VO | 430 | 500 | mV | Positive rail; RLOAD = 2 kΩ | 8 | |
| Quiescent current per amplifier | IQ | 1 | 1.2 | mA | IO = 0 A | 8 | |
| Quiescent current per amplifier | IQ | 1.5 | mA | TA = -40°C to 125°C, IO = 0 A | 8 | ||
| Supply voltage, VS = (V+), (V-) | VS | -20 | 20 | V | VS = (V+), (V-), dual supply | 5 | |
| Supply voltage, single-supply | VS | 40 | V | Single-supply, VS = (V+), (V-) | 5 | ||
| Signal input pins current | -10 | 10 | mA | Signal input pins | 5 | ||
| Operating free-air temperature range | -55 | 150 | °C | 5 | |||
| Junction temperature | 150 | °C | 5 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage, VS = (V+), (V-) | VS | 4.5 | 36 | V | VS = (V+), (V-); printed as ±2.25 V to ±18 V | 5 | |
| Specified temperature | -40 | 125 | °C | 5 | |||
| Junction-to-ambient thermal resistance (DGK, OPA192-Q1) | RθJA | 180.4 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (DGK, OPA192-Q1) | RθJC(top) | 67.9 | °C/W | 6 | |||
| Junction-to-board thermal resistance (DGK, OPA192-Q1) | RθJB | 102.1 | °C/W | 6 | |||
| Junction-to-top characterization parameter (DGK, OPA192-Q1) | ψJT | 10.4 | °C/W | 6 | |||
| Junction-to-board characterization parameter (DGK, OPA192-Q1) | ψJB | 100.3 | °C/W | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
OPA192QDGKRQ1 - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa192qdgkrq1-etched.step/opa192qdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa192qdgkrq1.step/opa192qdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
8e0a51d883a0a7d9, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).