Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC24FJ64GA002-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC24FJ64GA002-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR input Master Clear (device Reset) input with Schmitt Trigger buffer; brought low to cause a Reset.
2 AN0/VREF+/CN2/RA0 bidirectional PORTA digital I/O (ST) shared with A/D analog input AN0, A/D and comparator high reference VREF+, and interrupt-on-change CN2.
3 AN1/VREF-/CN3/RA1 bidirectional PORTA digital I/O (ST) shared with A/D analog input AN1, A/D and comparator low reference VREF-, and interrupt-on-change CN3.
4 RB0/RP0/AN2/C2IN-/PGED1/CN4 bidirectional PORTB I/O with remappable RP0, analog input AN2, Comparator 2 negative input, ICSP/debug data PGED1 and CN4.
5 RB1/RP1/AN3/C2IN+/PGEC1/CN5 bidirectional PORTB I/O with remappable RP1, analog input AN3, Comparator 2 positive input, ICSP/debug clock PGEC1 and CN5.
6 RB2/RP2/AN4/C1IN-/SDA2/CN6 bidirectional PORTB I/O with remappable RP2, analog input AN4, Comparator 1 negative input, I2C2 data SDA2 and CN6.
7 RB3/RP3/AN5/C1IN+/SCL2/CN7 bidirectional PORTB I/O with remappable RP3, analog input AN5, Comparator 1 positive input, I2C2 clock SCL2 and CN7.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSCI/CLKI/CN30/RA2 bidirectional PORTA I/O shared with main oscillator input OSCI, main clock input CLKI and CN30.
10 OSCO/CLKO/CN29/PMA0/RA3 bidirectional PORTA I/O shared with main oscillator output OSCO, system clock output CLKO, Parallel Master Port address bit PMA0 and CN29.
11 SOSCI/RP4/PMBE/CN1/RB4 bidirectional PORTB I/O with remappable RP4, secondary oscillator/Timer1 clock input SOSCI, PMP byte enable strobe PMBE and CN1.
12 RA4/SOSCO/T1CK/PMA1/CN0 bidirectional PORTA I/O shared with secondary oscillator output SOSCO, Timer1 clock T1CK, PMP address bit PMA1 and CN0.
13 VDD power_in Positive supply for peripheral digital logic and I/O pins.
14 RB5/RP5/PMD7/ASDA1/PGEC3/CN27 bidirectional PORTB I/O with remappable RP5, PMP data bit PMD7, alternate I2C1 data ASDA1, ICSP/debug clock PGEC3 and CN27.
15 RB6/RP6/PMD6/ASCL1/PGED3/CN24 bidirectional PORTB I/O with remappable RP6, PMP data bit PMD6, alternate I2C1 clock ASCL1, ICSP/debug data PGED3 and CN24.
16 RB7/RP7/INT0/PMD5/CN23 bidirectional PORTB I/O with remappable RP7, external interrupt input INT0, PMP data bit PMD5 and CN23.
17 RB8/RP8/SCL1/PMD4/TCK/CN22 bidirectional PORTB I/O with remappable RP8, I2C1 clock SCL1, PMP data bit PMD4, JTAG test clock input TCK and CN22.
18 RB9/RP9/SDA1/PMD3/TDO/CN21 bidirectional PORTB I/O with remappable RP9, I2C1 data SDA1, PMP data bit PMD3, JTAG test data output TDO and CN21.
19 DISVREG input Voltage regulator disable input; tie to ground to enable the on-chip regulator or to VDD to disable it.
20 VDDCAP/VDDCORE power_in External filter capacitor connection when regulator is enabled (10 µF, low ESR to ground, not to VDD), or core logic supply when regulator is disabled.
21 RB10/RP10/PMD2/PGED2/TDI/CN16 bidirectional PORTB I/O with remappable RP10, PMP data bit PMD2, ICSP/debug data PGED2, JTAG test data input TDI and CN16.
22 RB11/RP11/PMD1/PGEC2/TMS/CN15 bidirectional PORTB I/O with remappable RP11, PMP data bit PMD1, ICSP/debug clock PGEC2, JTAG test mode select TMS and CN15.
23 RB12/RP12/AN12/PMD0/CN14 bidirectional PORTB I/O with remappable RP12, analog input AN12, PMP data bit PMD0 and CN14.
24 RB13/RP13/AN11/PMRD/CN13 bidirectional PORTB I/O with remappable RP13, analog input AN11, PMP read strobe PMRD and CN13.
25 RB14/RP14/AN10/CVREF/PMWR/RTCC/CN12 bidirectional PORTB I/O with remappable RP14, analog input AN10, comparator voltage reference output CVREF, PMP write strobe PMWR, RTCC alarm output and CN12.
26 RB15/RP15/AN9/PMCS1/CN11 bidirectional PORTB I/O with remappable RP15, analog input AN9, PMP chip select 1 strobe PMCS1 and CN11.
27 VSS power_in Ground reference for logic and I/O pins.
28 VDD power_in Positive supply for peripheral digital logic and I/O pins.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 135 °C 231
Storage temperature -65 150 °C 231
Voltage on VDD with respect to VSS VDD -0.3 4 V 231
Voltage on any combined analog and digital pin and MCLR with respect to VSS -0.3 V Maximum printed as VDD + 0.3V 231
Voltage on any digital only pin with respect to VSS -0.3 6 V 231
Voltage on VDDCORE with respect to VSS VDDCORE -0.3 3 V 231
Operating junction temperature range TJ -40 140 °C 233
Operating ambient temperature range (industrial) TA -40 85 °C Industrial 234
Supply voltage VDD, regulator enabled VDD 3.6 V Regulator enabled 234
Supply voltage VDD, regulator disabled VDD 3.6 V Regulator disabled 234
Core supply voltage VDDCORE, regulator disabled VDDCORE 2 2.75 V Regulator disabled 234
Standard operating voltage VDD 2 3.6 V Standard Operating Conditions: 2.0V to 3.6V 234
RAM data retention voltage VDR 1.5 V 234
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms 0-3.3V in 0.1s 234
Brown-out Reset voltage VBOR 1.8 2.1 2.2 V 234
Operating current IDD, 2.0V, 1 MIPS IDD 0.65 0.85 mA 2.0V, 1 MIPS, +85°C 235
Operating current IDD, 3.3V, 1 MIPS IDD 1.2 1.6 mA 3.3V, 1 MIPS, +85°C 235
Operating current IDD, 3.3V, 4 MIPS IDD 4.1 5.4 mA 3.3V, 4 MIPS, +85°C 235
Operating current IDD, 3.3V, 16 MIPS IDD 15 20 mA 3.3V, 16 MIPS, +85°C 235
Operating current IDD, 3.3V, LPRC (31 kHz) IDD 95 124 A 3.3V, LPRC (31 kHz), +85°C 235
Idle current IIDLE, 3.3V, 4 MIPS IIDLE 0.82 1.1 mA 3.3V, 4 MIPS, +85°C 236
Idle current IIDLE, 3.3V, LPRC (31 kHz) IIDLE 70 91 A 3.3V, LPRC (31 kHz), +85°C 237
Power-down current IPD, 2.5V IPD 4.2 25 A 2.5V, +85°C 238
Power-down current IPD, 3.3V IPD 9 30 A 3.3V, +85°C 238
Watchdog Timer current IWDT, 3.3V IWDT 2.8 5 A 3.3V, +85°C 238
Input low voltage I/O pins VIL 0.2 VDD I/O pins 240
Input low voltage I/O pins with I2C buffer VIL 0.3 VDD SMBus disabled 240
Input high voltage I/O pins with analog functions VIH 0.8 VDD I/O pins with analog functions 240
Input high voltage MCLR VIH 0.8 VDD MCLR 240
CNxx pull-up current ICNPU 50 250 400 A AVDD = 3.3V, VPIN = VSS 240
Maximum load current for digital high detection with internal pull-up IPU 30 A VDD = 2.0V 241
Maximum load current for digital high detection with internal pull-up IPU 100 A VDD = 3.3V 241
Input leakage current I/O ports IIL 1 A AVSS ≤ VPIN ≤ VDD, pin at high-impedance 241
Input low injection current IICL 0 -5 mA Excludes VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS 241
Input high injection current IICH 0 5 mA Excludes VDD, VSS, AVDD, AVSS, MCLR, VCAP, RB11, SOSCI, SOSCO, D+, D-, VUSB, VBUS, and all 5V tolerant pins 241
Total input injection current IICT -20 20 mA Absolute instantaneous sum of all ± input injection currents from all I/O pins 241
Output low voltage all I/O pins VOL 0.4 V IOL = 8.5 mA, VDD = 3.6V 242
Output high voltage all I/O pins VOH 3 V IOH = -3.0 mA, VDD = 3.6V 242
Output high voltage all I/O pins VOH 1.65 V IOH = -1.0 mA, VDD = 2.0V 242
Program Flash cell endurance EP 10000 E/W -40C to +125C 242
VDD for read VPR 3.6 V VMIN = Minimum operating voltage 242
VDDCORE for self-timed write VPEW 2.25 2.75 V 242
Characteristic retention TRETD 20 Year Provided no other specifications are violated 242
External filter capacitor value CEFC 4.7 10 F Series resistance < 3 Ohm recommended; < 5 Ohm required 243
Voltage regulator start-up time TVREG 10 s POR, BOR or when PMSLP = 1 243
Power-up timer period TPWRT 64 ms DISVREG = VDD 243
Oscillator frequency HS FOSC 10 32 MHz HS, -40°C ≤ TA ≤ +85°C 245
Oscillator frequency SOSC FOSC 31 33 kHz SOSC 245
PLL output frequency range FSYS FSYS 8 32 MHz -40°C ≤ TA ≤ +85°C 246
Instruction cycle time TCY TCY 62.5 ns 245
Internal FRC accuracy @ 8 MHz -2 2 % +25°C 246
LPRC accuracy @ 31 kHz -15 15 % +25°C 246
A/D clock period TAD TAD 75 ns TCY = 75 ns, AD1CON3 in default state 249

CAD (KiCad official)

  • Symbol: PIC24FJ64GA002-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic24fj64ga002-i-etched.step / pic24fj64ga002-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic24fj64ga002-i.step / pic24fj64ga002-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (278 pp, sha256 67fd2ef41e1a2d3f, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF