component

SL82C250T

Public Unreviewed

by Ray

Slkor SLKORMICRO Elec CAN ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentcomm-uartsl82c250t
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

SL82C250T

Slkor SLKORMICRO Elec · CAN ICs · SOP-8

SL82C250T from Slkor SLKORMICRO Elec, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input Transmit data input from the CAN controller. Logic LOW drives the bus dominant (CANH high, CANL low); logic HIGH or open leaves the bus recessive. Internal pull-up ensures a recessive state when floating; VIH ≥ 2 V, VIL ≤ 0.8 V.
2 GND power_in Ground / 0 V reference for supply and signals.
3 VCC power_in Supply voltage input, 4.5 V to 5.5 V (nominal 5 V). Absolute maximum -0.3 to +7 V. Standby supply current is under ~12 μA.
4 RXD output Receive data output to the CAN controller. Reports bus state: LOW when the bus is dominant (VID ≥ 0.9 V), HIGH when recessive (VID ≤ 0.5 V). VOH ≥ 4 V at IO = -2 mA, VOL ≤ 0.4 V at IO = 2 mA.
5 VREF output Reference voltage output, nominally 0.5 × VCC (typically 2.5 V). Provides a stable mid-supply reference for the CAN controller or external circuitry.
6 CANL bidirectional Low-level CAN bus line. Driven low (~1.5 V typ) in dominant state and pulled to 0.5·VCC in recessive state. Withstands -8 V to +18 V DC and ±200 V transient; ±8 kV HBM ESD on the bus pins.
7 CANH bidirectional High-level CAN bus line. Driven high (~3.4 V typ) in dominant state and pulled to 0.5·VCC in recessive state. Withstands -8 V to +18 V DC and ±200 V transient; ±8 kV HBM ESD on the bus pins.
8 Rs input Slope/standby mode control input. Tie LOW for high-speed mode (driver active); tie HIGH or leave open to force low-current standby mode (ICC < ~5 μA typ, RXD still reports bus wake-up). A resistor to GND sets the driver slope/slew for reduced EMI.

Key specifications

Parameter Value
Manufacturer Slkor SLKORMICRO Elec
Package SOP-8
Category Comm/UART
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • SL82C250TT

CAD (KiCad official)

  • Symbol: SL82C250T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Slkor SLKORMICRO Elec datasheet (14 pp, sha256 75bae94528e924fb, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF