component
ADA4062-2BRZ
Public Made by Adomby adom
Analog Devices FET InputAmplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADA4062-2BRZ
Analog Devices · FET InputAmplifiers · SOIC-8
ADA4062-2BRZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A, which can swing to within about 13.5 V of the rails at ±15 V supply with a 10 kΩ load and has 20 mA short-circuit current. |
| 2 | -IN A | input | Inverting input of amplifier A, a JFET input with 50 pA maximum bias current. |
| 3 | +IN A | input | Non-inverting input of amplifier A, a JFET input with 50 pA maximum bias current and common-mode range of -11.5 V to +15 V at ±15 V supply. |
| 4 | V- | power_in | Negative supply, with total supply operation from ±5 V to ±15 V and an absolute maximum of ±18 V. |
| 5 | +IN B | input | Non-inverting input of amplifier B, a JFET input with 50 pA maximum bias current. |
| 6 | -IN B | input | Inverting input of amplifier B, a JFET input with 50 pA maximum bias current. |
| 7 | OUT B | output | Output of amplifier B, which has 20 mA short-circuit current and indefinite short-circuit duration to GND. |
| 8 | V+ | power_in | Positive supply, with operation from ±5 V to ±15 V dual supply and an absolute maximum of ±18 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage (B Grade) | VOS | 0.5 | 1.5 | mV | B Grade (ADA4062-2, 8-Lead SOIC Only) | 3 | |
| Offset Voltage (B Grade) over temperature | VOS | 3 | mV | -40°C ≤ TA ≤ +125°C | 3 | ||
| Input Bias Current | IB | 2 | 50 | pA | 3 | ||
| Input Bias Current over temperature | IB | 5 | nA | -40°C ≤ TA ≤ +125°C | 3 | ||
| Input Offset Current | IOS | 0.5 | 25 | pA | 3 | ||
| Input Offset Current over temperature | IOS | 2.5 | nA | -40°C ≤ TA ≤ +125°C | 3 | ||
| Input Voltage Range | -11.5 | 15 | V | -40°C ≤ TA ≤ +125°C | 3 | ||
| Common-Mode Rejection Ratio (B Grade) | CMRR | 80 | 90 | dB | B Grade, VCM = -11.5 V to +11.5 V | 3 | |
| Common-Mode Rejection Ratio (B Grade) over temperature | CMRR | 80 | dB | -40°C ≤ TA ≤ +125°C | 3 | ||
| Large-Signal Voltage Gain | AVO | 76 | 83 | dB | RL = 10 kΩ, VO = -10 V to +10 V | 3 | |
| Large-Signal Voltage Gain over temperature | AVO | 72 | dB | -40°C ≤ TA ≤ +125°C | 3 | ||
| Output Voltage High | VOH | 13 | 13.5 | V | RL = 10 kΩ to VCM | 3 | |
| Output Voltage High over temperature | VOH | 12.5 | V | -40°C ≤ TA ≤ +125°C | 3 | ||
| Output Voltage Low | VOL | -13.8 | -13 | V | RL = 10 kΩ to VCM | 3 | |
| Output Voltage Low over temperature | VOL | -12.5 | V | -40°C ≤ TA ≤ +125°C | 3 | ||
| Power Supply Rejection Ratio (B Grade) | PSRR | 80 | 90 | dB | B Grade, VSY = ±4 V to ±18 V | 3 | |
| Power Supply Rejection Ratio (B Grade) over temperature | PSRR | 80 | dB | -40°C ≤ TA ≤ +125°C | 3 | ||
| Supply Current per Amplifier | ISY | 165 | 220 | μA | IO = 0 mA | 3 | |
| Supply Current per Amplifier over temperature | ISY | 260 | μA | -40°C ≤ TA ≤ +125°C | 3 | ||
| Supply Voltage | -18 | 18 | V | 5 | |||
| Input Current | -10 | 10 | mA | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Operating Temperature Range | -40 | 125 | °C | 5 | |||
| Junction Temperature Range | -65 | 150 | °C | 5 | |||
| Lead Temperature (Soldering, 60 sec) | 300 | °C | 5 | ||||
| Thermal Resistance Junction-to-Ambient | θJA | 120 | °C/W | 8-Lead SOIC | 5 | ||
| Thermal Resistance Junction-to-Case | θJC | 45 | °C/W | 8-Lead SOIC | 5 | ||
| Offset Voltage Drift | ∆VOS/∆T | 5 | μV/°C | -40°C ≤ TA ≤ +125°C | 3 | ||
| Input Resistance | RIN | 10 | TΩ | 3 | |||
| Input Capacitance, Differential Mode | CINDM | 1.5 | pF | 3 | |||
| Input Capacitance, Common Mode | CINCM | 4.8 | pF | 3 | |||
| Short-Circuit Current | ISC | 20 | mA | 3 | |||
| Closed-Loop Output Impedance | ZOUT | 1 | Ω | f = 1 kHz, AV = 1 | 3 | ||
| Slew Rate | SR | 3.3 | V/μs | RL = 10 kΩ, CL = 100 pF, AV = 1 | 3 | ||
| Settling Time | tS | 3.5 | μs | To 0.1%, VIN = 10 V step, CL = 100 pF, RL = 10 kΩ, AV = 1 | 3 | ||
| Gain Bandwidth Product | GBP | 1.4 | MHz | RL = 10 kΩ, AV = 1 | 3 | ||
| Phase Margin | ΦM | 78 | Degrees | RL = 10 kΩ, AV = 1 | 3 | ||
| Channel Separation (ADA4062-2) | CS | 135 | dB | f = 1 kHz | 3 | ||
| Voltage Noise | en p-p | 1.5 | μV p-p | f = 0.1 Hz to 10 Hz | 4 | ||
| Voltage Noise Density | en | 36 | nV/√Hz | f = 1 kHz | 4 | ||
| Current Noise Density | in | 5 | fA/√Hz | f = 1 kHz | 4 |
CAD (KiCad official)
- Symbol:
ADA4062-2BRZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ada4062-2brz-etched.step/ada4062-2brz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ada4062-2brz.step/ada4062-2brz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
6aa8acd5c85366cf, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).