Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD8605ARTZ-R2

Analog Devices · Low Noise Amplifiers (LNA) - RF · SOT-23-5

AD8605ARTZ-R2 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output; output short-circuit duration to GND is limited per the derating curves, and output current is specified at ±80 mA with VS = 5 V.
2 V- power_in Negative supply pin; the AD8605 is a single-supply part operated from 2.7 V to 5.5 V, with input voltage limited to GND to VS.
3 +IN input Noninverting input; input voltage must remain between GND and VS (absolute maximum rating), and the input common-mode range is 0 V to VS.
4 -IN input Inverting input; input voltage must remain between GND and VS (absolute maximum rating), and the input common-mode range is 0 V to VS.
5 V+ power_in Positive supply pin; supply range is 2.7 V to 5.5 V with an absolute maximum supply voltage of 6 V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-5
Category RF And Wireless
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset voltage (AD8605/AD8606 except WLCSP), VS = 3.5 V, VCM = 3 V VOS 20 65 µV AD8605/AD8606 (Except WLCSP) VS = 3.5 V, VCM = 3 V 4
Offset voltage, VS = 5 V VOS 80 300 µV AD8605/AD8606/AD8608 VS = 5 V, VCM = 0 V to 5 V 4
Offset voltage over temperature, VS = 5 V VOS 750 µV −40°C < TA < +125°C 4
Input bias current IB 0.2 1 pA 4
Input bias current over temperature IB 50 pA AD8605/AD8606 −40°C < TA < +85°C 4
Input bias current over temperature IB 250 pA AD8605/AD8606 −40°C < TA < +125°C 4
Input offset current IOS 0.1 0.5 pA 4
Input offset current over temperature IOS 20 pA −40°C < TA < +85°C 4
Input offset current over temperature IOS 75 pA −40°C < TA < +125°C 4
Input voltage range, VS = 5 V 0 5 V 4
Common-mode rejection ratio, VS = 5 V CMRR 85 100 dB VCM = 0 V to 5 V 4
Common-mode rejection ratio over temperature, VS = 5 V CMRR 75 90 dB −40°C < TA < +125°C 4
Large signal voltage gain, VS = 5 V AVO 300 1000 V/mV RL = 2 kΩ, VO = 0.5 V to 4.5 V 4
Offset voltage drift (AD8605/AD8606) ΔVOS/ΔT 1 4.5 µV/°C AD8605/AD8606 −40°C < TA < +125°C 4
Output voltage high, 1 mA load, VS = 5 V VOH 4.96 4.98 V IL = 1 mA 4
Output voltage high, 10 mA load, VS = 5 V VOH 4.7 4.79 V IL = 10 mA 4
Output voltage high over temperature, VS = 5 V VOH 4.6 V −40°C < TA < +125°C 4
Output voltage low, 1 mA load, VS = 5 V VOL 20 40 mV IL = 1 mA 4
Output voltage low, 10 mA load, VS = 5 V VOL 170 210 mV IL = 10 mA 4
Output voltage low over temperature, VS = 5 V VOL 290 mV −40°C < TA < +125°C 4
Output current, VS = 5 V IOUT -80 80 mA 4
Power supply rejection ratio (AD8605/AD8606) PSRR 80 95 dB AD8605/AD8606 VS = 2.7 V to 5.5 V 4
Power supply rejection ratio over temperature PSRR 70 90 dB −40°C < TA < +125°C 4
Supply current per amplifier, VS = 5 V ISY 1 1.2 mA IOUT = 0 mA 4
Supply current per amplifier over temperature, VS = 5 V ISY 1.4 mA −40°C < TA < +125°C 4
Settling time, 5 V tS 1 µs To 0.01%, 0 V to 2 V step, AV = 1 4
Peak-to-peak noise, VS = 5 V en p-p 2.3 3.5 µV p-p f = 0.1 Hz to 10 Hz 5
Voltage noise density, 1 kHz, VS = 5 V en 8 12 nV/√Hz f = 1 kHz 5
Offset voltage, VS = 2.7 V VOS 80 300 µV VS = 2.7 V, VCM = 0 V to 2.7 V 6
Input voltage range, VS = 2.7 V 0 2.7 V 6
Common-mode rejection ratio, VS = 2.7 V CMRR 80 95 dB VCM = 0 V to 2.7 V 6
Common-mode rejection ratio over temperature, VS = 2.7 V CMRR 70 85 dB −40°C < TA < +125°C 6
Large signal voltage gain, VS = 2.7 V AVO 110 350 V/mV RL = 2 kΩ, VO = 0.5 V to 2.2 V 6
Output voltage high, 1 mA load, VS = 2.7 V VOH 2.6 2.66 V IL = 1 mA 6
Output voltage high over temperature, VS = 2.7 V VOH 2.6 V −40°C < TA < +125°C 6
Output voltage low, 1 mA load, VS = 2.7 V VOL 25 40 mV IL = 1 mA 6
Output voltage low over temperature, VS = 2.7 V VOL 50 mV −40°C < TA < +125°C 6
Output current, VS = 2.7 V IOUT -30 30 mA 6
Supply current per amplifier, VS = 2.7 V ISY 1.15 1.4 mA IOUT = 0 mA 6
Supply current per amplifier over temperature, VS = 2.7 V ISY 1.5 mA −40°C < TA < +125°C 6
Settling time, 2.7 V tS 0.5 µs To 0.01%, 0 V to 1 V step, AV = 1 6
Supply voltage (single-supply operating range) VS 2.7 5.5 V Single-supply operation (Features section) 1
Supply voltage 6 V 8
Differential input voltage 6 V 8
Storage temperature range -65 150 °C All packages 8
Operating temperature range -40 125 °C All packages 8
Junction temperature range -65 150 °C All packages 8
Lead temperature (soldering) 300 °C Soldering, 60 sec 8
Junction-to-ambient thermal resistance, 5-lead SOT-23 (RJ) θJA 240 °C/W Worst case, device soldered in circuit board 8
Junction-to-case thermal resistance, 5-lead SOT-23 (RJ) θJC 92 °C/W 5-Lead SOT-23 (RJ) 8

CAD (KiCad official)

  • Symbol: AD8605ARTZ-R2
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ad8605artz-r2-etched.step / ad8605artz-r2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8605artz-r2.step / ad8605artz-r2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 a907eb5a3622f156, retrieved 2026-11-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF