3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownESP8684-MINI-1-H4
Espressif Systems · RF and Wireless · ESP32-C3-MINI-1
ESP8684-MINI-1-H4 from Espressif Systems, in an ESP32-C3-MINI-1. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif's ESP32-C3-MINI-1 model, used because the ESP8684-MINI-1 datasheet gives identical outline dimensions (p.3 Table 1, p.31 Fig 8) on the same land.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the module. |
| 2 | GND | power_in | Ground pin of the module. |
| 3 | 3V3 | power_in | Power supply pin; the datasheet gives an operating voltage of 3.0 to 3.6 V with a 3.3 V typical value. |
| 4 | NC | unconnected | Not connected; leave this pin unconnected. |
| 5 | IO2 | bidirectional | GPIO2 with ADC1_CH2 and FSPIQ functions; I/O/T pin. |
| 6 | IO3 | bidirectional | GPIO3 with ADC1_CH3 function; the datasheet notes a low-level glitch during chip power-up. |
| 7 | NC | unconnected | Not connected; leave this pin unconnected. |
| 8 | EN | input | Chip enable: high turns the chip on, low turns it off; do not leave this pin floating. |
| 9 | NC | unconnected | Not connected; leave this pin unconnected. |
| 10 | NC | unconnected | Not connected; leave this pin unconnected. |
| 11 | GND | power_in | Ground pin of the module. |
| 12 | IO0 | bidirectional | GPIO0 with ADC1_CH0 function; the datasheet notes a low-level glitch during chip power-up. |
| 13 | IO1 | bidirectional | GPIO1 with ADC1_CH1 function; the datasheet notes a low-level glitch during chip power-up. |
| 14 | GND | power_in | Ground pin of the module. |
| 15 | NC | unconnected | Not connected; leave this pin unconnected. |
| 16 | IO10 | bidirectional | GPIO10 with FSPICS0 function; I/O/T pin. |
| 17 | NC | unconnected | Not connected; leave this pin unconnected. |
| 18 | IO4 | bidirectional | GPIO4 with ADC1_CH4, FSPIHD and MTMS functions; I/O/T pin. |
| 19 | IO5 | bidirectional | GPIO5 with FSPIWP and MTDI functions; the datasheet notes a low-level glitch during chip power-up. |
| 20 | IO6 | bidirectional | GPIO6 with FSPICLK and MTCK functions; I/O/T pin. |
| 21 | IO7 | bidirectional | GPIO7 with FSPID and MTDO functions; I/O/T pin. |
| 22 | IO8 | bidirectional | GPIO8; it is a strapping pin for chip boot mode and ROM message printing control. |
| 23 | IO9 | bidirectional | GPIO9; it is a strapping pin for chip boot mode, with an internal weak pull-up by default. |
| 24 | NC | unconnected | Not connected; leave this pin unconnected. |
| 25 | NC | unconnected | Not connected; leave this pin unconnected. |
| 26 | IO18 | bidirectional | GPIO18; I/O/T pin. |
| 27 | NC | unconnected | Not connected; leave this pin unconnected. |
| 28 | NC | unconnected | Not connected; leave this pin unconnected. |
| 29 | NC | unconnected | Not connected; leave this pin unconnected. |
| 30 | RXD0 | bidirectional | GPIO19 with U0RXD function, used as the UART0 receive pin for firmware download and debug. |
| 31 | TXD0 | bidirectional | GPIO20 with U0TXD function, used as the UART0 transmit pin for firmware download and debug. |
| 32 | NC | unconnected | Not connected; leave this pin unconnected. |
| 33 | NC | unconnected | Not connected; leave this pin unconnected. |
| 34 | NC | unconnected | Not connected; leave this pin unconnected. |
| 35 | NC | unconnected | Not connected; leave this pin unconnected. |
| 36 | GND | power_in | Ground pin of the module. |
| 37 | GND | power_in | Ground pin of the module. |
| 38 | GND | power_in | Ground pin of the module. |
| 39 | GND | power_in | Ground pin of the module. |
| 40 | GND | power_in | Ground pin of the module. |
| 41 | GND | power_in | Ground pin of the module. |
| 42 | GND | power_in | Ground pin of the module. |
| 43 | GND | power_in | Ground pin of the module. |
| 44 | GND | power_in | Ground pin of the module. |
| 45 | GND | power_in | Ground pin of the module. |
| 46 | GND | power_in | Ground pin of the module. |
| 47 | GND | power_in | Ground pin of the module. |
| 48 | GND | power_in | Ground pin of the module. |
| 49 | GND | power_in | Ground pin of the module; the schematic labels this pad as EPAD. |
| 50 | GND | power_in | Ground pin of the module. |
| 51 | GND | power_in | Ground pin of the module. |
| 52 | GND | power_in | Ground pin of the module. |
| 53 | GND | power_in | Ground pin of the module. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | ESP32-C3-MINI-1 |
| Category | RF and Wireless |
| Pins | 53 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VDD33 | -0.3 | 3.6 | V | 19 | ||
| Storage temperature | TSTORE | -40 | 105 | °C | 19 | ||
| Voltage applied to power supply pin | VDD33 | 3 | 3.3 | 3.6 | V | 19 | |
| Current delivered by external power supply | IVDD | 0.5 | A | 19 | |||
| Operating ambient temperature | TA | -40 | 105 | °C | 19 | ||
| High-level input current | IIH | 50 | nA | 19 | |||
| Low-level input current | IIL | 50 | nA | 19 | |||
| Center frequency range of operating channel | 2412 | 2484 | MHz | 22 | |||
| RF power control range | -24 | 20 | dBm | 24 | |||
| TX EVM standard limit | -24 | -10 | dB | 802.11b, 1 Mbps, @21 dBm | 22 | ||
| TX EVM standard limit | -23 | -5 | dB | 802.11g, 6 Mbps, @21 dBm | 22 | ||
| TX EVM standard limit | -30 | -25 | dB | 802.11g, 54 Mbps, @19 dBm | 23 | ||
| TX EVM standard limit | -27 | -5 | dB | 802.11n, HT20, MCS0, @20 dBm | 23 | ||
| TX EVM standard limit | -31 | -27 | dB | 802.11n, HT20, MCS7, @18 dBm | 23 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | THERMOPLASTIC | HOUSING MATERIAL: THERMOPLASTIC, WHITE, UL 94V-0; | 32 | |
| contacts | COPPER ALLOY | gold | CONTACT MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 32 |
| shell | COPPER ALLOY | gold | SHELL MATERIAL: COPPER ALLOY, GOLD PLATED ALL OVER; | 32 |
CAD (land: Espressif; 3D: ESP32-C3-MINI-1 model, same outline)
- Symbol:
ESP8684-MINI-1-H4 - Footprint:
PCM_Espressif:ESP32-C3-MINI-1 - 3D model: ESP32-C3-MINI-1, Espressif's model of the same outline (Espressif KiCad libraries, STEP)
- 3D model files:
esp8684-mini-1-h4-etched.step/esp8684-mini-1-h4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp8684-mini-1-h4.step/esp8684-mini-1-h4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (40 pp, sha256
489a23018cbf0303, retrieved 2026-11-18) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif's ESP32-C3-MINI-1 model, used because the ESP8684-MINI-1 datasheet gives identical outline dimensions (p.3 Table 1, p.31 Fig 8) on the same land.