component
SMD1206-110C-24V
Public Made by Adomby adom
BNstar Resettable Fuses, 1206. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSMD1206-110C-24V
BNstar · Resettable Fuses · 1206
SMD1206-110C-24V from BNstar, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BNstar |
| Package | 1206 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum continuous voltage (rated voltage) | Vmax | 24 | V | Maximum continuous voltage device can withstand without damage at rated current | 1 | ||
| Maximum fault current | Imax | 40 | A | At rated voltage | 1 | ||
| Maximum time to trip | Ttrip | 0.3 | s | At 8.0 A assigned trip current, reflow 260℃ for 20 s | 1 | ||
| Minimum resistance (initial, un-soldered state) | Rmin | 0.04 | Ω | Initial un-soldered state | 1 | ||
| Maximum resistance at 25℃ one hour after reflow | R1max | 0.27 | Ω | 25℃, measured one hour after reflow soldering of 260℃ for 20 s | 1 | ||
| Recommended storage temperature | 40 | ℃ | Recommended storage conditions | 2 | |||
| Recommended storage relative humidity | 70 | %RH | Recommended storage conditions | 2 | |||
| Maximum ambient operating temperature range | -40 | 85 | ℃ | Range of ambient temperature columns in thermal derating table | 2 | ||
| Hold current | IH | 1.1 | A | 25℃ still air | 1 | ||
| Trip current | IT | 2.2 | A | 25℃ still air | 1 | ||
| Typical power dissipation | Pdtyp | 0.6 | W | Typical, in still air | 1 | ||
| Hold current at ambient temperature -40℃ | IH | 1.6 | A | Ambient temperature -40℃ (derating table) | 2 | ||
| Hold current at ambient temperature -20℃ | IH | 1.45 | A | Ambient temperature -20℃ (derating table) | 2 | ||
| Hold current at ambient temperature 0℃ | IH | 1.3 | A | Ambient temperature 0℃ (derating table) | 2 | ||
| Hold current at ambient temperature 25℃ | IH | 1.1 | A | Ambient temperature 25℃ (derating table) | 2 | ||
| Hold current at ambient temperature 40℃ | IH | 0.95 | A | Ambient temperature 40℃ (derating table) | 2 | ||
| Hold current at ambient temperature 50℃ | IH | 0.8 | A | Ambient temperature 50℃ (derating table) | 2 | ||
| Hold current at ambient temperature 60℃ | IH | 0.72 | A | Ambient temperature 60℃ (derating table) | 2 | ||
| Hold current at ambient temperature 70℃ | IH | 0.66 | A | Ambient temperature 70℃ (derating table) | 2 | ||
| Hold current at ambient temperature 85℃ | IH | 0.55 | A | Ambient temperature 85℃ (derating table) | 2 |
CAD (KiCad official)
- Symbol:
SMD1206-110C-24V - Footprint:
Fuse:Fuse_1206_3216Metric - 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files:
smd1206-110c-24v-etched.step/smd1206-110c-24v-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);smd1206-110c-24v.step/smd1206-110c-24v.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BNstar datasheet (3 pp, sha256
8d847456f8dc8a93, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).