3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL431BIDR
Texas Instruments · Voltage Reference · SOIC-8
TL431BIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | output | Adjustable parallel regulator output supporting 0.4-100 mA continuous sink current over 2.5 V to 36 V range. |
| 2 | ANODE | power_in | Negative supply reference (ground) pin; connect to system ground or negative rail. |
| 3 | ANODE | power_in | Negative supply reference (ground) pin; connect to system ground or negative rail. |
| 4 | NC | unconnected | No internal connection; may be connected to ANODE or left open per application requirements. |
| 5 | NC | unconnected | No internal connection; may be connected to ANODE or left open per application requirements. |
| 6 | ANODE | power_in | Negative supply reference (ground) pin; connect to system ground or negative rail. |
| 7 | ANODE | power_in | Negative supply reference (ground) pin; connect to system ground or negative rail. |
| 8 | REF | input | Reference voltage input with internal 2.5 V threshold; requires 2-4 µA minimum input bias current from threshold to ANODE. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (VKA = Vref, IKA = 10 mA) | Vref | 2483 | 2495 | 2507 | mV | VKA = Vref, IKA = 10mA, TA = 25°C | 14 |
| Reference input voltage deviation over temperature range | VI(dev) | 14 | 34 | mV | VKA = Vref, IKA = 10mA | 14 | |
| Ratio of change in reference voltage to change in cathode voltage | ΔVref / ΔVKA | -1.4 | -2.7 | mV/V | IKA = 10mA, ΔVKA = 10V - Vref | 14 | |
| Ratio of change in reference voltage to change in cathode voltage | ΔVref / ΔVKA | -1 | -2 | mV/V | IKA = 10mA, ΔVKA = 36V - 10V | 14 | |
| Reference input current | Iref | 2 | 4 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 14 | |
| Reference input current deviation over temperature range | II(dev) | 0.8 | 2.5 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 14 | |
| Minimum cathode current for regulation | Imin | 0.4 | 0.7 | mA | VKA = Vref | 14 | |
| Off-state cathode current | Ioff | 0.1 | 0.5 | µA | VKA = 36V, Vref = 0 | 14 | |
| Dynamic impedance | /ZKA/ | 0.2 | 0.5 | Ω | VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA | 14 | |
| Cathode voltage (absolute maximum) | VKA | 37 | V | Referenced to ANODE | 6 | ||
| Continuous cathode current range (absolute maximum) | IKA | -100 | 150 | mA | 6 | ||
| Reference input current (absolute maximum) | II(ref) | -0.05 | 10 | mA | 6 | ||
| Operating virtual junction temperature range (absolute maximum) | TJ | 150 | °C | 6 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 6 | ||
| Cathode voltage (recommended) | VKA | 36 | V | Minimum printed as Vref (not a numeric value) | 6 | ||
| Continuous cathode current range (recommended) | IKA | 1 | 100 | mA | 6 | ||
| Operating free-air temperature range (TL43xxI) | TA | -40 | 85 | °C | TL43xxI, natural air | 6 | |
| Junction-to-ambient thermal resistance (D, SOIC-8) | RθJA | 97 | °C/W | D package (SOIC-8) | 6 | ||
| Junction-to-case (top) thermal resistance (D, SOIC-8) | RθJC(top) | 39 | °C/W | D package (SOIC-8) | 6 |
CAD (KiCad official)
- Symbol:
TL431BIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tl431bidr-etched.step/tl431bidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl431bidr.step/tl431bidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (86 pp, sha256
313277b9351e61ed, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).