component
1TG100DHNS002R
Public Made by Adomby adom
KDS Daishinku Crystals, DT-26. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown1TG100DHNS002R
KDS Daishinku · Crystals · DT-26
1TG100DHNS002R from KDS Daishinku, in a DT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of a two-terminal crystal; either orientation. |
| 2 | 2 | passive | Terminal 2 of a two-terminal crystal; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | KDS Daishinku |
| Package | DT-26 |
| Category | Crystals, Oscillators, Resonators |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency tolerance | -20 | 20 | ×10-6 | 2 | |||
| Series resistance | 40 | kΩ | /Series | 2 | |||
| Drive level tolerance | -0.2 | 1 | 0.2 | μW | 2 | ||
| Drive level maximum | 2 | μW | Original characteristics cannot be guaranteed above 2.0μW | 2 | |||
| Turnover temperature tolerance | -5 | 25 | 5 | °C | 2 | ||
| Parabolic coefficient | -0.04 | ×10-6/°C2 | 2 | ||||
| Operating temperature range | -10 | 60 | °C | 2 | |||
| Storage temperature range | -20 | 70 | °C | 2 | |||
| Insulation resistance | 500 | MΩ | DC100±15V, lead to lead, lead to case | 2 | |||
| Frequency variation after tests (Table-1 grade A) | -3 | 3 | ×10-6 | After shock, vibration, soldering heat, high/low temperature and humidity tests | 7 | ||
| Series resistance variation after tests (Table-1 grade A, percent) | -15 | 15 | % | After tests; use larger specification of % or kΩ | 7 | ||
| Series resistance variation after tests (Table-1 grade A, absolute) | -5 | 5 | kΩ | After tests; use larger specification of % or kΩ | 7 | ||
| Dipping temperature at leads | 280 | °C | Dipping at leads, 5 s max. | 8 | |||
| Dipping temperature at leads | 260 | °C | Dipping at leads, 10 s max. | 8 | |||
| Hand soldering temperature | 350 | °C | 3 s max. | 8 | |||
| Storage temperature (handling guide) | 40 | °C | Storage, per handling guide 7.8 | 9 | |||
| Storage humidity (handling guide) | 80 | % | Storage, per handling guide 7.8 | 9 | |||
| Nominal frequency | 60.003 | kHz | 1 | ||||
| Loading capacitance | CL | 10 | pF | 2 | |||
| Shunt capacitance | 0.75 | pF | 2 |
CAD (KiCad official)
- Symbol:
1TG100DHNS002R - Footprint:
Crystal:Crystal_DS26_D2.0mm_L6.0mm_Vertical - 3D model: DT-26 (KiCad packages3D, STEP)
- 3D model files:
1tg100dhns002r-etched.step/1tg100dhns002r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);1tg100dhns002r.step/1tg100dhns002r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: KDS Daishinku datasheet (10 pp, sha256 ``, retrieved 2026-10-14, tier: lcsc)
- Extractor: parts-factory
2.0.0/extract_pins, primarycrystal numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).