Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM324PT

STMicroelectronics · Operational Amplifier · TSSOP-14

LM324PT from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1; output voltage swings from near ground to VCC+ minus about 1.5 V and can source/sink current per the datasheet's Isource/Isink limits.
2 IN1- input Inverting input of amplifier 1; input bias current typically 20 nA and input common-mode voltage range includes ground.
3 IN1+ input Non-inverting input of amplifier 1; input common-mode voltage range extends from ground to VCC+ minus 1.5 V.
4 VCC+ power_in Positive supply pin for all four amplifiers; single supply operation from +3 V to +30 V (or dual supplies ±1.5 V to ±15 V).
5 IN2+ input Non-inverting input of amplifier 2; input common-mode voltage range includes ground.
6 IN2- input Inverting input of amplifier 2; low input bias current typically 20 nA.
7 OUT2 output Output of amplifier 2; capable of sourcing/sinking output current as specified in the electrical characteristics table.
8 OUT3 output Output of amplifier 3; capable of sourcing/sinking output current as specified in the electrical characteristics table.
9 IN3- input Inverting input of amplifier 3; low input bias current typically 20 nA.
10 IN3+ input Non-inverting input of amplifier 3; input common-mode voltage range includes ground.
11 VCC- power_in Negative supply/ground reference pin for all four amplifiers, common to ground in single-supply operation; supports dual supplies down to -15 V.
12 IN4+ input Non-inverting input of amplifier 4; input common-mode voltage range includes ground.
13 IN4- input Inverting input of amplifier 4; low input bias current typically 20 nA.
14 OUT4 output Output of amplifier 4; output voltage swings from near ground to VCC+ minus about 1.5 V and can source/sink current per the datasheet's Isource/Isink limits.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage, Tamb=+25 C Vio 2 7 mV VCC+=+5 V, VCC-=ground, Vo=1.4 V, Tamb=+25 C 4
Input offset voltage, Tmin<=Tamb<=Tmax (LM324) Vio 9 mV VCC+=+5 V, VCC-=ground, Vo=1.4 V, Tmin<=Tamb<=Tmax 4
Input offset current, Tamb=+25 C Iio 2 30 nA VCC+=+5 V, VCC-=ground, Vo=1.4 V, Tamb=+25 C 4
Input offset current, Tmin<=Tamb<=Tmax Iio 100 nA VCC+=+5 V, VCC-=ground, Vo=1.4 V, Tmin<=Tamb<=Tmax 4
Input bias current, Tamb=+25 C Iib 20 150 nA VCC+=+5 V, VCC-=ground, Vo=1.4 V, Tamb=+25 C 4
Input bias current, Tmin<=Tamb<=Tmax Iib 300 nA VCC+=+5 V, VCC-=ground, Vo=1.4 V, Tmin<=Tamb<=Tmax 4
Large signal voltage gain, Tamb=+25 C Avd 50 100 V/mV VCC+=+15 V, RL=2 kOhm, Vo=1.4 V to 11.4 V, Tamb=+25 C 4
Large signal voltage gain, Tmin<=Tamb<=Tmax Avd 25 V/mV VCC+=+15 V, RL=2 kOhm, Vo=1.4 V to 11.4 V, Tmin<=Tamb<=Tmax 4
Supply voltage rejection ratio, Tamb=+25 C SVR 65 110 dB Rs<=10 kOhm, VCC+=5 V to 30 V, Tamb=+25 C 4
Supply voltage rejection ratio, Tmin<=Tamb<=Tmax SVR 65 dB Rs<=10 kOhm, VCC+=5 V to 30 V, Tmin<=Tamb<=Tmax 4
Supply current, all amps, no load, VCC=+5 V, Tamb=+25 C ICC 0.7 1.2 mA No load, VCC=+5 V, Tamb=+25 C 4
Supply current, all amps, no load, VCC=+30 V, Tamb=+25 C ICC 1.5 3 mA No load, VCC=+30 V, Tamb=+25 C 4
Supply current, all amps, no load, VCC=+5 V, Tmin<=Tamb<=Tmax ICC 0.8 1.2 mA No load, VCC=+5 V, Tmin<=Tamb<=Tmax 4
Supply current, all amps, no load, VCC=+30 V, Tmin<=Tamb<=Tmax ICC 1.5 3 mA No load, VCC=+30 V, Tmin<=Tamb<=Tmax 4
Input common mode voltage range, Tamb=+25 C Vicm 0 V VCC=+30 V, Tamb=+25 C; max printed as VCC -1.5 V 4
Input common mode voltage range, Tmin<=Tamb<=Tmax Vicm 0 V VCC=+30 V, Tmin<=Tamb<=Tmax; max printed as VCC -2 V 4
Common mode rejection ratio, Tamb=+25 C CMR 70 80 dB Rs<=10 kOhm, Tamb=+25 C 4
Common mode rejection ratio, Tmin<=Tamb<=Tmax CMR 60 dB Rs<=10 kOhm, Tmin<=Tamb<=Tmax 4
Output current source Isource 20 40 70 mA Vid=+1 V, VCC=+15 V, Vo=+2 V 4
Output sink current, Vo=+2 V Isink 10 20 mA Vid=-1 V, VCC=+15 V, Vo=+2 V 5
Output sink current, Vo=+0.2 V Isink 12 50 uA Vid=-1 V, VCC=+15 V, Vo=+0.2 V 5
High level output voltage, VCC=+30 V, RL=2 kOhm, Tamb=+25 C VOH 26 V VCC=+30 V, RL=2 kOhm, Tamb=+25 C 5
High level output voltage, VCC=+30 V, RL=2 kOhm, Tmin<=Tamb<=Tmax VOH 26 V VCC=+30 V, RL=2 kOhm, Tmin<=Tamb<=Tmax 5
High level output voltage, VCC=+30 V, RL=10 kOhm, Tamb=+25 C VOH 27 28 V VCC=+30 V, RL=10 kOhm, Tamb=+25 C 5
High level output voltage, VCC=+30 V, RL=10 kOhm, Tmin<=Tamb<=Tmax VOH 27 V VCC=+30 V, RL=10 kOhm, Tmin<=Tamb<=Tmax 5
High level output voltage, VCC=+5 V, RL=2 kOhm, Tamb=+25 C VOH 3.5 V VCC=+5 V, RL=2 kOhm, Tamb=+25 C 5
High level output voltage, VCC=+5 V, RL=2 kOhm, Tmin<=Tamb<=Tmax VOH 3 V VCC=+5 V, RL=2 kOhm, Tmin<=Tamb<=Tmax 5
Low level output voltage, Tamb=+25 C VOL 5 20 mV RL=10 kOhm, Tamb=+25 C 5
Low level output voltage, Tmin<=Tamb<=Tmax VOL 20 mV RL=10 kOhm, Tmin<=Tamb<=Tmax 5
Input offset voltage drift DVio 7 30 uV/C 5
Input offset current drift DIio 10 200 pA/C 5
Supply voltage VCC 32 V Printed as +/-16 or 32 V 3
Input voltage Vin -0.3 32 V Either or both inputs must not exceed VCC+ or VCC- 3
Differential input voltage Vid 32 V 3
Input current, Vin driven negative, DC Iin 5 mA Vin driven negative, DC 3
Input current, Vin driven negative, AC Iin 50 mA Vin driven negative, AC, duty cycle 10%, T=1 s 3
Input current, Vin driven positive above AMR Iin 0.4 mA Vin driven positive above AMR value 3
Operating free-air temperature range (LM324) Toper 0 70 C LM324 grade 3
Storage temperature range Tstg -65 150 C 3
Maximum junction temperature Tj 150 C 3
Thermal resistance junction to ambient, TSSOP14 Rthja 100 C/W TSSOP14 package; two-layer board 3
Thermal resistance junction to case, TSSOP14 Rthjc 32 C/W TSSOP14 package 3
ESD human body model ESD HBM 250 V 100 pF through 1.5 kOhm 3
ESD machine model ESD MM 150 V 200 pF, no series resistor 3
ESD charged device model ESD CDM 1500 V All pins and package charged together 3

CAD (KiCad official)

  • Symbol: LM324PT
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: lm324pt-etched.step / lm324pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm324pt.step / lm324pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (19 pp, sha256 0d302ab0a638e41f, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF