component
AIP74LVC1G126GB235.TR
Public Made by Adomby adom
Wuxi I-core Elec Buffers, Drivers, Receivers, Transceivers, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAIP74LVC1G126GB235.TR
Wuxi I-core Elec · Buffers, Drivers, Receivers, Transceivers · SOT-23-5
AIP74LVC1G126GB235.TR from Wuxi I-core Elec, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input; a LOW level puts output Y in the high-impedance OFF-state, HIGH enables it (input accepts up to 5.5V). |
| 2 | A | input | Data input, accepts 3.3V or 5V drive with VI up to 5.5V. |
| 3 | GND | power_in | Ground (0V). |
| 4 | Y | tri_state | 3-state data output, ±24mA drive at VCC=3.0V, high-impedance when OE is LOW. |
| 5 | VCC | power_in | Supply voltage, 1.65V to 5.5V recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi I-core Elec |
| Package | SOT-23-5 |
| Category | Logic |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 6.5 | V | 4 | ||
| Input voltage | VI | -0.5 | 6.5 | V | 4 | ||
| Output voltage, active mode | VO | -0.5 | V | Active mode; max printed as VCC+0.5 | 4 | ||
| Output voltage, power-down mode | VO | -0.5 | 6.5 | V | Power-down mode | 4 | |
| Input clamping current | IIK | -50 | mA | VI < 0V | 4 | ||
| Output clamping current | IOK | -50 | 50 | mA | VO > VCC or VO < 0V | 4 | |
| Output current | IO | -50 | 50 | mA | VO=0V to VCC | 4 | |
| Supply current | ICC | 100 | mA | 4 | |||
| Ground current | IGND | -100 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | ℃ | 4 | ||
| Total power dissipation | Ptot | 250 | mW | 4 | |||
| Soldering temperature | TL | 250 | ℃ | 10s | 4 | ||
| Supply voltage | VCC | 1.65 | 5.5 | V | 4 | ||
| Input voltage | VI | 0 | 5.5 | V | 4 | ||
| Output voltage, active mode | VO | 0 | V | Active mode; max printed as VCC | 4 | ||
| Output voltage, power-down mode | VO | 0 | 5.5 | V | Power-down mode; VCC=0V | 4 | |
| Ambient temperature | Tamb | -40 | 105 | ℃ | 4 | ||
| Input transition rise and fall rate | Δt/ΔV | 20 | ns/V | VCC=1.65V to 2.7V | 4 | ||
| Input transition rise and fall rate | Δt/ΔV | 10 | ns/V | VCC=2.7V to 5.5V | 4 | ||
| HIGH-level input voltage | VIH | 1.7 | V | VCC=2.3V to 2.7V; Tamb=-40℃ to +85℃ | 5 | ||
| HIGH-level input voltage | VIH | 2 | V | VCC=2.7V to 3.6V; Tamb=-40℃ to +85℃ | 5 | ||
| LOW-level input voltage | VIL | 0.7 | V | VCC=2.3V to 2.7V; Tamb=-40℃ to +85℃ | 5 | ||
| LOW-level input voltage | VIL | 0.8 | V | VCC=2.7V to 3.6V; Tamb=-40℃ to +85℃ | 5 | ||
| HIGH-level output voltage | VOH | 1.2 | V | VI=VIH or VIL; IO=-4mA; VCC=1.65V; Tamb=-40℃ to +85℃ | 5 | ||
| HIGH-level output voltage | VOH | 1.9 | V | VI=VIH or VIL; IO=-8mA; VCC=2.3V; Tamb=-40℃ to +85℃ | 5 | ||
| HIGH-level output voltage | VOH | 2.2 | V | VI=VIH or VIL; IO=-12mA; VCC=2.7V; Tamb=-40℃ to +85℃ | 5 | ||
| HIGH-level output voltage | VOH | 2.3 | V | VI=VIH or VIL; IO=-24mA; VCC=3.0V; Tamb=-40℃ to +85℃ | 5 | ||
| HIGH-level output voltage | VOH | 3.8 | V | VI=VIH or VIL; IO=-32mA; VCC=4.5V; Tamb=-40℃ to +85℃ | 5 | ||
| LOW-level output voltage | VOL | 0.1 | V | VI=VIH or VIL; IO=100uA; VCC=1.65V to 5.5V; Tamb=-40℃ to +85℃ | 5 | ||
| LOW-level output voltage | VOL | 0.45 | V | VI=VIH or VIL; IO=4mA; VCC=1.65V; Tamb=-40℃ to +85℃ | 5 | ||
| LOW-level output voltage | VOL | 0.3 | V | VI=VIH or VIL; IO=8mA; VCC=2.3V; Tamb=-40℃ to +85℃ | 5 | ||
| LOW-level output voltage | VOL | 0.4 | V | VI=VIH or VIL; IO=12mA; VCC=2.7V; Tamb=-40℃ to +85℃ | 5 | ||
| LOW-level output voltage | VOL | 0.55 | V | VI=VIH or VIL; IO=24mA; VCC=3.0V; Tamb=-40℃ to +85℃ | 5 | ||
| Input leakage current | II | -1 | 0.1 | 1 | uA | VI=5.5V or GND; VCC=0V to 5.5V; Tamb=-40℃ to +85℃; typ printed ±0.1 | 5 |
| OFF-state output current | IOZ | -2 | 0.1 | 2 | uA | VI=VIH or VIL; VO=5.5V or GND; VCC=3.6V; Tamb=-40℃ to +85℃; typ printed ±0.1 | 5 |
| Power-off leakage current | IOFF | -2 | 0.1 | 2 | uA | VI or VO=5.5V; VCC=0V; Tamb=-40℃ to +85℃; typ printed ±0.1 | 5 |
| Supply current | ICC | 0.1 | 4 | uA | VI=5.5V or GND; IO=0A; VCC=1.65V to 5.5V; Tamb=-40℃ to +85℃ | 5 | |
| Additional supply current | ΔICC | 5 | 500 | uA | per pin; VI=VCC-0.6V; IO=0A; VCC=2.3V to 5.5V; Tamb=-40℃ to +85℃ | 5 | |
| A to Y propagation delay | tpd | 1 | 3 | 8 | ns | see Figure 5; VCC=1.65V to 1.95V; Tamb=-40℃ to +85℃ | 7 |
| A to Y propagation delay | tpd | 0.5 | 2.1 | 5.5 | ns | see Figure 5; VCC=2.3V to 2.7V; Tamb=-40℃ to +85℃ | 7 |
| A to Y propagation delay | tpd | 0.5 | 2.3 | 5.5 | ns | see Figure 5; VCC=2.7V; Tamb=-40℃ to +85℃ | 7 |
| A to Y propagation delay | tpd | 0.5 | 2 | 4.5 | ns | see Figure 5; VCC=3.0V to 3.6V; Tamb=-40℃ to +85℃ | 7 |
| A to Y propagation delay | tpd | 0.5 | 1.7 | 4 | ns | see Figure 5; VCC=4.5V to 5.5V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y enable time | ten | 1 | 3.2 | 9.4 | ns | see Figure 6; VCC=1.65V to 1.95V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y enable time | ten | 0.5 | 2.2 | 6.6 | ns | see Figure 6; VCC=2.3V to 2.7V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y enable time | ten | 0.5 | 2.4 | 6.6 | ns | see Figure 6; VCC=2.7V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y enable time | ten | 0.5 | 2.1 | 5.3 | ns | see Figure 6; VCC=3.0V to 3.6V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y enable time | ten | 0.5 | 1.6 | 5 | ns | see Figure 6; VCC=4.5V to 5.5V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y disable time | tdis | 1 | 4.3 | 9.2 | ns | see Figure 6; VCC=1.65V to 1.95V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y disable time | tdis | 0.5 | 2.7 | 5.5 | ns | see Figure 6; VCC=2.3V to 2.7V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y disable time | tdis | 0.5 | 3.4 | 5.5 | ns | see Figure 6; VCC=2.7V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y disable time | tdis | 0.5 | 3 | 5.5 | ns | see Figure 6; VCC=3.0V to 3.6V; Tamb=-40℃ to +85℃ | 7 |
| OE to Y disable time | tdis | 0.5 | 2.2 | 4.2 | ns | see Figure 6; VCC=4.5V to 5.5V; Tamb=-40℃ to +85℃ | 7 |
| Supply current | ICC | 4 | uA | VI=5.5V or GND; IO=0A; VCC=1.65V to 5.5V; Tamb=-40℃ to +105℃ | 6 | ||
| Power-off leakage current | IOFF | -2 | 2 | uA | VI or VO=5.5V; VCC=0V; Tamb=-40℃ to +105℃ | 6 | |
| Input capacitance | CI | 5 | pF | 5 | |||
| Power dissipation capacitance, output enabled | CPD | 25 | pF | per buffer; VI=GND to VCC; output enabled | 7 | ||
| Power dissipation capacitance, output disabled | CPD | 6 | pF | per buffer; VI=GND to VCC; output disabled | 7 |
CAD (KiCad official)
- Symbol:
AIP74LVC1G126GB235.TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
aip74lvc1g126gb235-tr-etched.step/aip74lvc1g126gb235-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aip74lvc1g126gb235-tr.step/aip74lvc1g126gb235-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi I-core Elec datasheet (13 pp, sha256
009ea1334f52b6c9, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).