Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCF8574M

HGSEMI · I/O Expanders · SOP-16-150mil

PCF8574M from HGSEMI, in a SOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 A0 input Hardware address input 0; one of three address pins that set the device's I2C slave address (up to 8 devices on one bus).
2 A1 input Hardware address input 1; one of three address pins that set the device's I2C slave address (up to 8 devices on one bus).
3 A2 input Hardware address input 2; one of three address pins that set the device's I2C slave address (up to 8 devices on one bus).
4 P0 bidirectional Quasi-bidirectional I/O 0; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use.
5 P1 bidirectional Quasi-bidirectional I/O 1; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use.
6 P2 bidirectional Quasi-bidirectional I/O 2; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use.
7 P3 bidirectional Quasi-bidirectional I/O 3; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use.
8 VSS power_in Supply ground, the 0 V reference for the device (VSS = 0 V in the DC characteristics).
9 P4 bidirectional Quasi-bidirectional I/O 4; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use.
10 P5 bidirectional Quasi-bidirectional I/O 5; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use.
11 P6 bidirectional Quasi-bidirectional I/O 6; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use.
12 P7 bidirectional Quasi-bidirectional I/O 7; latched output with high current drive for directly driving LEDs, LOW-level output current 10 to 25 mA at VOL = 1 V and VDD = 5 V, and inputs should be HIGH before use.
13 INT output Open-drain interrupt output, active LOW, that signals a change on the port inputs to the microcontroller; minimum LOW-level output current 1.6 mA at VOL = 0.4 V.
14 SCL input I2C-bus serial clock line, up to 100 kHz, which must be pulled up to the positive supply through a resistor.
15 SDA bidirectional I2C-bus serial data line, which must be pulled up to the positive supply through a resistor and is pulled LOW by the device during acknowledge.
16 VDD power_in Supply voltage, 2.5 V to 6.0 V per the DC characteristics.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-16-150mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage (absolute maximum) VDD -0.5 7 V 11
DC input current II 20 mA 11
DC output current IO 25 mA 11
supply current IDD (absolute maximum) IDD 100 mA 11
supply current ISS (absolute maximum) ISS 100 mA 11
total power dissipation Ptot 400 mW 11
power dissipation per output PO 100 mW 11
storage temperature Tstg -65 150 ℃ 11
operating ambient temperature (as printed in limiting values table) Tamb -40 85 ℃ 11
lead temperature (soldering) TL 260 ℃ Soldering, 10 seconds 11
IDD supply current IDD 40 100 µA operating mode; VDD =6 V; no load; VI = VDD or VSS; fSCL = 100 kHz 11
standby current Istb 2.5 10 µA standby mode; VDD =6 V; no load; VI = VDD or VSS 11
power-on reset voltage VPOR 1.3 2.4 V VDD = 6 V; no load; VI = VDD or VSS; note 1 11
LOW level input voltage (SCL, SDA) VIL -0.5 V 11
LOW level output current (SCL, SDA) IOL 3 mA VOL = 0.4 V 11
leakage current (SCL, SDA) IL -1 1 µA VI = VDD or VSS 11
input capacitance (SCL, SDA) Ci 7 pF VI = VSS 11
maximum allowed input current through protection diode IIHL(max) 400 µA VI ≥ VDD or VI ≤ VSS 12
LOW level output current (I/Os) IOL 10 25 mA VOL =1 V; VDD = 5 V 12
HIGH level output current (I/Os) IOH 30 300 µA VOH = VSS 12
input capacitance (I/Os) Ci 10 pF 12
output capacitance (I/Os) Co 10 pF 12
output data valid tpv 4 µs CL ≤ 100 pF (see Figs 10 and 11) 12
input data set-up time tsu 0 µs CL ≤ 100 pF (see Figs 10 and 11) 12
input data hold time th 4 µs CL ≤ 100 pF (see Figs 10 and 11) 12
LOW level output current (INT) IOL 1.6 mA VOL = 0.4 V 12
leakage current (INT) IL -1 1 µA VI = VDD or VSS 12
input data valid time tiv 4 µs CL ≤ 100 pF 12
reset delay time tir 4 µs CL ≤ 100 pF 12
LOW level input voltage (A0 to A2) VIL -0.5 V 12
input leakage current (A0 to A2) ILI -250 250 nA pin at VDD or VSS 12
SCL clock frequency fSCL 100 kHz 13
tolerable spike width on bus tSW 100 ns 13
bus free time tBUF 4.7 µs 13
START condition set-up time tSU;STA 4.7 µs 13
START condition hold time tHD;STA 4 µs 13
SCL LOW time tLOW 4.7 µs 13
SCL HIGH time tHIGH 4 µs 13
SCL and SDA rise time tr 1 µs 13
SCL and SDA fall time tf 0.3 µs 13
data set-up time tSU;DAT 250 ns 13
data hold time tHD;DAT 0 ns 13
SCL LOW to data out valid tVD;DAT 3.4 µs 13
STOP condition set-up time tSU;STO 4 µs 13
HIGH level output current during acknowledge (transient pull-up) IOHt -1 mA HIGH during acknowledge (see Fig.14); VOH = VSS; VDD = 2.5 V 12

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: PCF8574M
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16-150mil, generated on the KiCad land (body 3.9 x 9.9 mm, terminals on the pads, 1.4500000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: pcf8574m-etched.step / pcf8574m-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pcf8574m.step / pcf8574m.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (18 pp, sha256 b4f2128e4d380a5d, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF