Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL1208IU8Z-TK

Intersil(Renesas Electronics) · Real-time Clocks (RTC) · MSOP-8

ISL1208IU8Z-TK from Intersil(Renesas Electronics), in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 input X1 is the input of an inverting amplifier intended for one pin of an external 32.768kHz quartz crystal, and can also be driven directly from a 32.768kHz source.
2 X2 output X2 is the output of an inverting amplifier intended to connect to the other pin of an external 32.768kHz quartz crystal.
3 VBAT power_in VBAT provides a backup supply voltage that powers the device when VDD fails, with VBAT specified from 1.8V to 5.5V; it should be tied to ground if not used.
4 GND power_in GND is the ground reference for the device.
5 SDA bidirectional SDA is the bidirectional serial data pin, an open drain output that may be wire-OR'ed and requires a pull-up resistor.
6 SCL input SCL is the serial clock input used to clock all serial data into and out of the device.
7 IRQ/FOUT output IRQ/FOUT is a multifunction open drain active low pin used as an interrupt output or frequency output, with the function set via the configuration register.
8 VDD power_in VDD is the main power supply pin, specified from 2.7V to 5.5V for the main supply.

Key specifications

Parameter Value
Manufacturer Intersil(Renesas Electronics)
Package MSOP-8
Category Clock and Timing
Pins 8

CAD (KiCad official)

  • Symbol: ISL1208IU8Z-TK
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: isl1208iu8z-tk-etched.step / isl1208iu8z-tk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl1208iu8z-tk.step / isl1208iu8z-tk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Intersil(Renesas Electronics) datasheet (24 pp, sha256 ce7c089b10df0689, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF