3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownRS432BYSF3
Jiangsu RUNIC Tech · Voltage Reference · SOT-23
RS432BYSF3 from Jiangsu RUNIC Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input pin. Threshold input relative to the common anode; the internal amplifier regulates the cathode so that VREF (≈2.5V) appears between REF and Anode. Typical reference input current 1.5µA (max 4µA). |
| 2 | CATHODE | input | Cathode (shunt current/voltage input). Recommended VKA from VREF up to 36V, continuous cathode current 0.5 to 100mA. Acts as the regulated shunt terminal, sinking current to maintain the programmed voltage. |
| 3 | ANODE | power_in | Anode / common pin, normally connected to ground. All voltages in the device specifications are with respect to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
RS432AYSF3RS432BYSF3
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage (1% B grade) | VREF | 2.475 | 2.5 | 2.525 | V | VKA=VREF, IKA=10mA | 5 |
| Deviation of reference input voltage over temperature | ΔVREF | 4.5 | 25 | mV | VKA=VREF, IKA=10mA, Tmin ≤ TA ≤ Tmax | 5 | |
| Ratio of change in reference input voltage to change in cathode voltage | ΔVREF/ΔVKA | -1 | -2.7 | mV/V | IKA=10mA, ΔVKA=10V~VREF | 5 | |
| Ratio of change in reference input voltage to change in cathode voltage | ΔVREF/ΔVKA | -0.5 | -2 | mV/V | IKA=10mA, ΔVKA=36V~10V | 5 | |
| Reference input current | IREF | 1.5 | 4 | uA | IKA=10mA, R1=10kΩ, R2=∞ | 5 | |
| Deviation of reference input current over full temperature range | ΔIREF/ΔTA | 0.2 | 0.4 | uA | IKA=10mA, R1=10kΩ, R2=∞, TA=full temperature | 5 | |
| Minimum cathode current for regulation | IKA(min) | 0.3 | 0.5 | mA | VKA=VREF | 5 | |
| Off-state cathode current | IKA(OFF) | 0.05 | 0.5 | uA | VKA=36V, VREF=0V | 5 | |
| Dynamic impedance | ZKA | 0.15 | 0.5 | Ω | VKA=VREF, IKA=1 to 100mA, f≤1.0KHz | 5 | |
| Cathode voltage | VKA | -0.3 | 37 | V | Absolute maximum rating, voltages with respect to GND pin | 4 | |
| Cathode current range (continuous) | IKA | -100 | 155 | mA | Absolute maximum rating | 4 | |
| Reference input current range | IREF | -0.05 | 10 | mA | Absolute maximum rating | 4 | |
| Operating temperature | Topr | -40 | 105 | °C | Absolute maximum rating, operating free-air temperature | 4 | |
| Power dissipation | PD | 370 | mW | Absolute maximum rating | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | Absolute maximum rating | 4 | |
| Cathode voltage (recommended) | VKA | 36 | V | Recommended operating range is VREF to 36 V; minimum printed as the symbol VREF, not a number | 4 | ||
| Cathode current range (continuous, recommended) | IKA | 0.5 | 100 | mA | Recommended operating conditions | 4 | |
| Operating ambient temperature range | TA | -40 | 105 | °C | Recommended operating conditions | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 185.6 | °C/W | SOT23 3-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 104.3 | °C/W | SOT23 3-pin package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 54.5 | °C/W | SOT23 3-pin package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 31 | °C/W | SOT23 3-pin package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 54.5 | °C/W | SOT23 3-pin package | 4 | ||
| Equivalent full-range temperature coefficient | 50 | ppm/°C | Equivalent full-range, typical (Features list) | 1 |
CAD (KiCad official)
- Symbol:
RS432BYSF3 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
rs432bysf3-etched.step/rs432bysf3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs432bysf3.step/rs432bysf3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (9 pp, sha256
8f8161e218eaee64, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).