component
LSM6DSLTR
Public Made by Adomby adom
STMicroelectronics Attitude Sensors, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLSM6DSLTR
STMicroelectronics · Attitude Sensors · LGA-14(2.5x3)
LSM6DSLTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDO/SA0 | bidirectional | SPI 4-wire interface serial data output (SDO) and I2C least significant bit of the device address (SA0). |
| 2 | SDx | bidirectional | Mode 1: connect to VDDIO or GND; Mode 2: I2C serial data master (MSDA). |
| 3 | SCx | bidirectional | Mode 1: connect to VDDIO or GND; Mode 2: I2C serial clock master (MSCL). |
| 4 | INT1 | output | Programmable interrupt 1. |
| 5 | VDDIO | power_in | Power supply for I/O pins; a 100 nF filter capacitor is recommended. |
| 6 | GND | power_in | 0 V supply. |
| 7 | GND | power_in | 0 V supply. |
| 8 | VDD | power_in | Power supply (analog supply 1.71 V to 3.6 V); a 100 nF filter capacitor is recommended. |
| 9 | INT2 | bidirectional | Programmable interrupt 2 (INT2) / data enable (DEN); in Mode 2 also I2C master external synchronization signal (MDRDY). |
| 10 | NC | unconnected | Leave unconnected and soldered to PCB. |
| 11 | NC | unconnected | Leave unconnected and soldered to PCB. |
| 12 | CS | input | I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled). |
| 13 | SCL | input | I2C serial clock (SCL) / SPI serial port clock (SPC). |
| 14 | SDA | bidirectional | I2C serial data (SDA) / SPI serial data input (SDI) / 3-wire interface serial data output (SDO). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LGA-14(2.5x3) |
| Category | Sensors |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
LSM6DSLTR - Footprint:
Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm - 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
- 3D model files:
lsm6dsltr-etched.step/lsm6dsltr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lsm6dsltr.step/lsm6dsltr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (115 pp, sha256
9b8b2844eb4b4e3f, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).