Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP1703T-1202E

Microchip Tech · Power Management Specialized - PMIC · SOT-23A-3

MCP1703T-1202E from Microchip Tech, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground; tie to the negative side of the output and input capacitors, only the 2.0 µA typical LDO bias current flows out of this pin and output regulation is referenced to it.
2 VOUT power_out Regulated voltage output; connect to the positive side of the load and output capacitor (1.0 µF to 22 µF ceramic), carrying the DC load current up to 250 mA (200 mA for outputs below 2.5V).
3 VIN power_in Unregulated supply input accepting 2.7V to 16.0V; needs low source impedance, typically 1 µF of input capacitance for stable operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23A-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 16 V Note 1 3
Input Quiescent Current Iq 2 5 µA IL = 0 mA 3
Maximum Output Current IOUT_mA 50 100 mA For VR < 2.5V, VIN ≥ 2.7V 3
Maximum Output Current IOUT_mA 100 130 mA For VR < 2.5V, VIN ≥ 2.95V 3
Maximum Output Current IOUT_mA 150 200 mA For VR < 2.5V, VIN ≥ 3.2V 3
Maximum Output Current IOUT_mA 200 250 mA For VR < 2.5V, VIN ≥ 3.45V 3
Output Voltage Regulation (2% grade) VOUT -2 0.4 2 % VR-2.0% to VR+2.0%, typ VR±0.4%, Note 2 3
Line Regulation ΔVOUT/(VOUT×ΔVIN) -0.3 0.1 0.3 %/V (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 16V, Note 1 3
Load Regulation ΔVOUT/VOUT -2.5 1 2.5 % IL = 1.0 mA to 200 mA for VR < 2.5V, VIN = 3.65V, Note 4 3
Operating Junction Temperature Range TJ -40 125 °C Steady State 4
Maximum Junction Temperature TJ 150 °C Transient 4
Storage Temperature Range TA -65 150 °C 4
Supply Voltage VDD 18 V 3
Input/Output Voltage -0.3 0.3 V All inputs and outputs w.r.t. (VSS-0.3V) to (VIN+0.3V) 3
ESD protection HBM 4 kV All pins, HBM 3
ESD protection MM 400 V All pins, MM 3
Maximum Junction Temperature (abs max) 150 °C 3
Storage temperature (abs max) -65 150 °C 3
Thermal Resistance, 3LD SOT-23A junction to ambient θJA 336 °C/W EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board 4
Thermal Resistance, 3LD SOT-23A junction to case θJC 110 °C/W EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board 4
Output Short Circuit Current IOUT_SC 400 mA VIN = VIN(MIN) (Note 1), VOUT = GND, average current measured 10 ms after short is applied 3
VOUT Temperature Coefficient TCVOUT 50 ppm/°C Note 3 3
Output Delay Time TDELAY 1000 µs VIN = 0V to 6V, VOUT = 90% VR, RL = 50Ω resistive 4
Output Noise eN 8 µV/(Hz)1/2 IL = 50 mA, f = 1 kHz, COUT = 1 µF 4
Power Supply Ripple Rejection Ratio PSRR 44 dB f = 100 Hz, COUT = 1 µF, IL = 100 µA, VINAC = 100 mV pk-pk, CIN = 0 µF, VR = 1.2V 4
Thermal Shutdown Protection TSD 150 °C 4

CAD (KiCad official)

  • Symbol: MCP1703T-1202E
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23A-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1703t-1202e-etched.step / mcp1703t-1202e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1703t-1202e.step / mcp1703t-1202e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 7bfdaa05d529bf00, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF