component
LM5106MM
Public Made by Adomby adom
Texas Instruments Gate Drivers, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM5106MM
Texas Instruments · Gate Drivers · VSSOP-10-0.5mm
LM5106MM from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive gate drive supply with recommended operating voltage 8-14 V; decouple to VSS using a low ESR/ESL capacitor placed as close to the IC as possible. |
| 2 | HB | power_in | Bootstrap supply positive rail; connect positive terminal of bootstrap capacitor here with voltage relative to HS of 8-14 V. |
| 3 | HO | output | High-side gate driver output; connect to the gate of the high-side N-MOS device through a short, low inductance path. |
| 4 | HS | power_in | High-side MOSFET source node and bootstrap capacitor negative terminal connection; voltage floats from -1 to 100 V relative to VSS. |
| 5 | NC | unconnected | Not connected; no internal connection to the die. |
| 6 | RDT | input | Dead-time programming input; connect resistor from RDT to VSS to program the turnon delay of both MOSFETs with voltage range -0.3 to 5 V. |
| 7 | EN | input | TTL-compatible logic input for driver enable/disable with hysteresis; LO and HO held in low state when EN is low. |
| 8 | IN | input | TTL-compatible logic input for gate driver control with hysteresis; high-side MOSFET turned on and low-side turned off when IN is high. |
| 9 | VSS | power_in | Ground return; all signals are referenced to this ground. |
| 10 | LO | output | Low-side gate driver output; connect to the gate of the low-side N-MOS device through a short, low inductance path. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Motor Driver ICs |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
LM5106MM - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
lm5106mm-etched.step/lm5106mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5106mm.step/lm5106mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
1e623b370d6f5134, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).