Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP73842-820I

Microchip Tech · Battery Management ICs · MSOP-10

MCP73842-820I from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SENSE input Charge current sense input; a sense resistor between VDD and the external pass transistor sets fast charge current (220 mΩ gives typically 500 mA).
2 VDD power_in Battery management input supply; [VREG(Typ) + 0.3V] to 12V recommended, bypass to VSS with a minimum of 4.7 µF.
3 STAT1 output Current-limited open-drain charge status output for direct LED drive, or with a pull-up resistor for a host microcontroller.
4 EN input Logic enable input to force charge termination, initiate charge, clear faults or disable automatic recharge.
5 THREF output Cell temperature sensor bias; voltage reference to bias the external thermistor for continuous cell temperature monitoring and prequalification.
6 THERM input Cell temperature sensor input for an external thermistor; applying 0.85V disables temperature sensing.
7 TIMER passive Timer set pin; all safety timers are scaled by CTIMER/0.1 µF.
8 VSS power_in Battery management 0V reference; connect to negative terminal of battery.
9 VBAT power_in Battery voltage sense input connected to battery positive terminal, bypass to VSS with a minimum of 4.7 µF; regulates final voltage to VREG.
10 DRV output Direct output drive of an external P-channel MOSFET for current and voltage regulation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category Power Supply Chip
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 8.7 12 V MCP73842, MCP73844 3
Supply Current Disabled ISS 0.25 4 µA Disabled 3
Supply Current Operating ISS 0.75 4 mA Operating, VDD =VREG(Typ)+1V 3
UVLO Start Threshold VSTART 8.45 8.65 8.9 V VDD Low-to-High, MCP73842, MCP73844 3
UVLO Stop Threshold VSTOP 8.4 8.6 8.85 V VDD High-to-Low, MCP73842, MCP73844 3
Regulated Output Voltage VREG 8.159 8.2 8.241 V VDD = [VREG(Typ)+1V], IOUT = 10 mA, TA = -5°C to +55°C 3
Line Regulation /ΔVBAT/VBAT//ΔVDD 0.025 0.25 %/V VDD = [VREG(Typ)+1V] to 12V, IOUT = 10 mA 3
Load Regulation /ΔVBAT//VBAT 0.01 0.25 % IOUT = 10 mA to 150 mA, VDD = [VREG(Typ)+1V] 3
Supply Ripple Attenuation 100 Hz PSRR -58 dB IOUT = 10 mA, 100 Hz 3
Supply Ripple Attenuation 1 kHz PSRR -42 dB IOUT = 10 mA, 1 kHz 3
Supply Ripple Attenuation 10 kHz PSRR -30 dB IOUT = 10 mA, 10 kHz 3
Output Reverse Leakage Current IDISCHARGE 0.4 1 µA VDD Floating, VBAT = VREG(Typ) 3
Fast Charge Current Regulation Threshold VFCS 100 110 120 mV VDD, VSENSE, TA = -5°C to +55°C 3
Precondition Current Regulation Threshold VPCS 5 10 15 mV VDD, VSENSE, TA = -5°C to +55°C 4
Precondition Threshold Voltage VPTH 5.4 5.6 5.8 V VBAT Low-to-High, MCP73842-8.2 4
Charge Termination Threshold VTCS 4 7 10 mV VDD, VSENSE, TA = -5°C to +55°C 4
Recharge Threshold Voltage VRTH -600 -400 -200 mV VREG offset, VBAT High-to-Low, MCP73842 4
Gate Drive Minimum Voltage VDRVMIN 1 V VDD = 4.5V 4
Gate - Source Clamp Voltage VGS -7 -4.5 V VDD = 12.0V 4
Thermistor Reference Output Voltage VTHREF 2.475 2.55 2.625 V TA = +25°C, VDD = VREG(Typ)+1V, ITHREF = 0 mA 4
Thermistor Reference Source Current ITHREF 200 µA 4
Thermistor Reference Line Regulation ΔVTHREF/VTHREF)//ΔVDD 0.1 0.25 %/V VDD=[VREG(Typ)+1V] to 12V 4
Thermistor Reference Load Regulation ΔVTHREF/VTHREF 0.01 0.1 % ITHREF = 0 mA to 0.20 mA 4
Upper Trip Threshold VT1 1.18 1.25 1.32 V 4
Lower Trip Threshold VT2 0.59 0.62 0.66 V 4
Thermistor Input Bias Current /IBIAS/ 2 µA 4
Status Sink Current ISINK 4 7 12 mA 4
Status Low Output Voltage VOL 200 400 mV ISINK = 1 mA 4
Status Input Leakage Current ILK 0.01 1 µA ISINK = 0 mA, VSTAT1 = 12V 4
Enable Input High-Voltage Level VIH 1.4 V 5
Enable Input Low-Voltage Level VIL 0.8 V 5
Enable Input Leakage Current ILK 0.01 1 µA VENABLE = 12V 5
UVLO Start Delay tSTART 5 msec VDD Low-to-High 5
Transition Time Out of Preconditioning tDELAY 1 msec VBAT< VPTH to VBAT > VPTH 5
Current Rise Time Out of Preconditioning tRISE 1 msec IOUT Rising to 90% of IREG 5
Fast Charge Safety Timer Period tFAST 1.1 1.5 1.9 Hours CTIMER = 0.1 µF 5
Preconditioning Charge Safety Timer Period tPRECON 45 60 75 Minutes CTIMER = 0.1 µF 5
Elapsed Time Termination Period tTERM 2.2 3 3.8 Hours CTIMER = 0.1 µF 5
Status Output turn-off tOFF 200 µsec ISINK = 10 mA to 0 mA 5
Status Output turn-on tON 200 µsec ISINK = 0 mA to 10 mA 5
Input/Output Voltage -0.3 V All inputs and outputs w.r.t. VSS, max (VDD+0.3)V 3
Current at DRV Pin -4 4 mA 3
Current at STAT1 Pin -30 30 mA 3
Maximum Junction Temperature TJ 150 °C 3
Storage temperature -65 150 °C 3
ESD HBM 2 kV Human Body Model (1.5 kΩ in Series with 100 pF) 3
ESD MM 200 V Machine Model (200 pF, No Series Resistance) 3
Specified Temperature Range TA -40 85 °C 5
Operating Temperature Range TA -40 125 °C 5
Thermal Resistance, MSOP-10 θJA 113 °C/W 4-Layer JC51-7 Standard Board, Natural Convection 5
Thermistor Reference Temperature Coefficient TCTHREF 50 ppm/°C 4
Gate Drive Current Sink IDRV 2 mA Sink, CV Mode 4

CAD (KiCad official)

  • Symbol: MCP73842-820I
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: mcp73842-820i-etched.step / mcp73842-820i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp73842-820i.step / mcp73842-820i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (26 pp, sha256 da2a0f52e1435a78, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF