Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA202IDBVT

Texas Instruments · Precision Op Amps · SOT-23-5

OPA202IDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Op-amp output. Drives capacitive loads up to 25 nF with 5-µs settling; short-circuit protected.
2 V- power_in Negative (lowest) power supply. Operating supply range V+ to V- from 4.5 V to 36 V (i.e. ±2.25 V to ±18 V dual-supply).
3 +IN input Noninverting input. Ultra-high input impedance 3000 GΩ
4 -IN input Inverting input. Ultra-high input impedance 3000 GΩ
5 V+ power_in Positive (highest) power supply. Quiescent current 580 µA typical at ±18 V. Decouple with local bypass capacitor to V-.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • OPA202IDBVT
  • OPA202IDBVR
  • OPA202IDBVT.B
  • OPA202IDBVR.B
  • OPA202IDBVTIDR
  • OPA202IDBVTID.B
  • OPA202IDBVTIDR.B
  • OPA202IDBVTIDGKR
  • OPA202IDBVTIDGKT
  • OPA202IDBVTIDGKR.B
  • OPA202IDBVTIDGKT.B

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -200 20 200 µV VS = ±18 V 8
Input offset voltage over temperature VOS -250 250 µV VS = ±18 V, TA = –40°C to +105°C 8
Input offset voltage drift dVOS/dT -1 0.5 1 µV/°C TA = –40°C to +105°C 8
Input offset voltage versus power supply PSRR -0.5 0.1 0.5 µV/V VS = ±2.25 V to ±18 V 8
Input offset voltage versus power supply over temperature PSRR -0.5 0.5 µV/V VS = ±2.25 V to ±18 V, TA = –40°C to +105°C 8
Input bias current IB -2 0.25 2 nA 8
Input bias current over temperature IB -2.1 2.1 nA TA = –40°C to +105°C 8
Input offset current (OPA202) IOS -150 15 150 pA 8
Input offset current over temperature (OPA202) IOS -700 700 pA TA = –40°C to +105°C 8
Common-mode rejection ratio CMRR 114 131 dB VS = ±2.25 V; (V–) + 1.5 V < VCM < (V+) – 1.5 V 8
Common-mode rejection ratio over temperature CMRR 114 dB VS = ±2.25 V; (V–) + 1.5 V < VCM < (V+) – 1.5 V, TA = –40°C to +105°C 8
Common-mode rejection ratio CMRR 126 148 dB VS = ±18 V; (V–) + 1.5 V < VCM < (V+) – 1.5 V 8
Common-mode rejection ratio over temperature CMRR 119 dB VS = ±18 V; (V–) + 1.5 V < VCM < (V+) – 1.5 V, TA = –40°C to +105°C 8
Open-loop voltage gain AOL 120 135 dB VS = ±2.25 V; (V–) + 1.25 V ≤ VO ≤ (V+) – 1.25 V; RL = 10 kΩ 8
Open-loop voltage gain over temperature AOL 119 dB VS = ±2.25 V; (V–) + 1.25 V ≤ VO ≤ (V+) – 1.25 V; RL = 10 kΩ, TA = –40℃ to +105℃ 8
Open-loop voltage gain AOL 126 150 dB VS = ±18 V; (V–) + 1.25 V ≤ VO ≤ (V+) – 1.25 V; RL = 10 kΩ 8
Open-loop voltage gain over temperature AOL 126 dB VS = ±18 V; (V–) + 1.25 V ≤ VO ≤ (V+) – 1.25 V; RL = 10 kΩ, TA = –40℃ to +105℃ 8
Open-loop voltage gain AOL 120 133 dB VS = ±2.25 V; (V–) + 1.25 V ≤ VO ≤ (V+) – 1.25 V; RL = 2 kΩ 8
Voltage output swing from rail 650 750 mV VS = ±18 V; TA = 25°C, No Load 9
Voltage output swing from rail 800 900 mV VS = ±18 V; TA = 25°C, RL = 10 kΩ 9
Voltage output swing from rail 1.05 1.15 V VS = ±18 V; TA = 25°C, RL = 2 kΩ 9
Voltage output swing from rail over temperature 1 V VS = ±18 V; TA = –40°C to +105°C, RL = 10 kΩ 9
Voltage output swing from rail with AOL > 120 dB 1.05 V VS = ±18 V; AOL > 120 dB, RL = 10 kΩ 9
Voltage output swing from rail with AOL > 120 dB 1.25 V VS = ±18 V; AOL > 120 dB, RL = 2 kΩ 9
Quiescent current per amplifier IQ 580 800 µA IO = 0 mA 9
Quiescent current per amplifier over temperature IQ 900 µA IO = 0 mA, TA = –40°C to +105°C 9
Supply voltage, single-supply VS 4.5 36 V Single-supply 6
Supply voltage, dual-supply VS 2.25 18 V Dual-supply, printed as ±2.25 V to ±18 V 6
Specified temperature TA -40 105 °C 6
Supply voltage (absolute maximum), single-supply VS 40 V Single-supply, VS = (V+) – (V–) 6
Supply voltage (absolute maximum), dual-supply VS -20 20 V Dual-supply, VS = (V+) – (V–) 6
Differential input voltage -0.5 0.5 V 6
Input current -10 10 mA 6
Operating temperature TA -40 125 °C 6
Junction temperature TJ 125 °C 6
Storage temperature Tstg -65 150 °C 6
Junction-to-ambient thermal resistance (DBV, 5-pin SOT-23) RθJA 206 °C/W 7
Junction-to-case (top) thermal resistance (DBV, 5-pin SOT-23) RθJC(top) 121.8 °C/W 7
Junction-to-board thermal resistance (DBV, 5-pin SOT-23) RθJB 65.9 °C/W 7
Junction-to-top characterization parameter (DBV, 5-pin SOT-23) ΨJT 39 °C/W 7
Junction-to-board characterization parameter (DBV, 5-pin SOT-23) ΨJB 65.6 °C/W 7

CAD (KiCad official)

  • Symbol: OPA202IDBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 a36f3e86792e8cd5, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF