component
TPS77601DR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS77601DR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
TPS77601DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground connection serving as the reference return for input and output stages. |
| 2 | EN | input | Negative-polarity enable (EN) input; tie to ground for normal regulator operation or drive high to place device in shutdown mode. |
| 3 | IN | power_in | Unregulated input voltage supply accepting voltage range of -0.3V to +13.5V. |
| 4 | IN | power_in | Unregulated input voltage supply accepting voltage range of -0.3V to +13.5V; may be paralleled with pin 3 for current distribution. |
| 5 | OUT | power_out | Regulated output voltage providing 1.2V to 5.5V adjustable via external feedback network; requires minimum 10µF capacitor with equivalent series resistance between 50mΩ and 1.5Ω connected to GND. |
| 6 | OUT | power_out | Regulated output voltage providing 1.2V to 5.5V adjustable via external feedback network; may be paralleled with pin 5 for current distribution. |
| 7 | FB | input | Feedback voltage input to sense output voltage and close regulation loop for adjustable versions only; requires external resistor divider with approximately 10µA divider current. |
| 8 | PG | output | Open-drain power-good (PG) output for TPS776xx devices; pulls low when regulated output voltage drops to between 92% and 98% of nominal programmed value. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS77601DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps77601dr-etched.step/tps77601dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps77601dr.step/tps77601dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
8829e2a477a2c896, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).