Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS74533PQWDRVRQ1

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)

TPS74533PQWDRVRQ1 from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated 3.3V output voltage pin; requires 0.47µF to 220µF capacitor to GND for stability.
2 NC unconnected No internal connection; ground this pin for improved thermal performance.
3 GND power_in Ground reference pin.
4 EN input Enable input; drive above VEN(HI)=1.0V minimum to turn on regulator, below VEN(LO)=0.3V maximum to shutdown.
5 PG tri_state Open-drain power-good output; indicates output voltage regulation status with PGLTH=86% to PGHTH=92% VOUT hysteresis range.
6 IN power_in Power supply input pin accepting 1.5V to 6.0V nominal range; place ≥1µF input capacitor close to this pin.
7 Thermal Pad power_in Thermal pad electrically connected to GND; connect to GND plane with vias for improved thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6-EP(2x2)
Category Power Management (PMIC)
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 1.5 6 V 4
Output voltage (fixed only) VOUT 0.65 5 V Fixed only 4
Output current IOUT 0 500 mA 4
Output capacitor COUT 1 220 µF 4
Enable voltage VEN 0 6 V 4
PG voltage VPG 0 6 V 4
Junction operating temperature TJ -40 150 °C 4
Supply voltage VIN -0.3 6.5 V 4
Enable voltage VEN -0.3 6.5 V 4
Power-good voltage VPG -0.3 6.5 V 4
Output voltage VOUT -0.3 V Printed max VIN + 0.3 (VIN + 0.3 V or 6.0 V, whichever is smaller) 4
Power-good current IPG -10 10 mA 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Output accuracy -0.85 0.85 % TJ = 25°C 5
Output accuracy -1 1 % -40°C ≤ TJ ≤ 85°C 5
Output accuracy -1.5 1.5 % -40°C ≤ TJ ≤ 150°C 5
Line regulation 2 7.5 mV VOUT(NOM) + 0.5 V ≤ VIN ≤ 6.0 V 5
Ground current IGND 25 32 µA IOUT = 0 mA, TJ = 25°C 5
Ground current IGND 25 36 µA IOUT = 0 mA, -40°C ≤ TJ ≤ 150°C 5
Shutdown current ISHDN 0.1 1 µA VEN ≤ 0.3 V, 1.5 V ≤ VIN ≤ 6.0 V, -40°C ≤ TJ ≤ 125°C 5
Shutdown current ISHDN 0.1 1.55 µA VEN ≤ 0.3 V, 1.5 V ≤ VIN ≤ 6.0 V, -40°C ≤ TJ ≤ 150°C 5
Undervoltage lockout (falling) VUVLO 1.17 1.3 1.42 V VIN falling 5
Undervoltage lockout (rising) VUVLO 1.21 1.34 1.47 V VIN rising 5
Dropout voltage VDO 95 160 mV IOUT = 500 mA, VOUT = 0.95 × VOUT(NOM), 3.3 V ≤ VOUT ≤ 5.5 V 5
Startup time tSTR 200 500 650 µs From EN low-to-high transition to VOUT = VOUT(NOM) x 0.95 6
PG high threshold PGHTH 89 92 96 %VOUT VOUT increasing 6
PG low threshold PGLTH 86 90 93 %VOUT VOUT decreasing 6
PG pin leakage current Ilkg(PG) 7 50 nA VOUT > PGHTH, VPG = 6.0 V 6
PG delay time rising tPGDH 135 165 178 µs Output overdrive = 10%; time from 92% VOUT to 20% of PG 6
PG delay time falling tPGDL 1.5 7 10 µs Output overdrive = 10%; time from 90% VOUT to 80% of PG 6
Junction-to-ambient thermal resistance (DRV) RθJA 80.3 °C/W 5
Junction-to-case (top) thermal resistance (DRV) RθJC(top) 98.7 °C/W 5
Junction-to-board thermal resistance (DRV) RθJB 44.8 °C/W 5
Junction-to-top characterization parameter (DRV) ψJT 6.1 °C/W 5
Junction-to-board characterization parameter (DRV) ψJB 45 °C/W 5
Junction-to-case (bottom) thermal resistance (DRV) RθJC(bot) 20.8 °C/W 5

CAD (KiCad official)

  • Symbol: TPS74533PQWDRVRQ1
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps74533pqwdrvrq1-etched.step / tps74533pqwdrvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps74533pqwdrvrq1.step / tps74533pqwdrvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 434ed7c32560a28e, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF