component
SN74AHC245QDWRG4Q1
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74AHC245QDWRG4Q1
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · SOIC-20-300mil
SN74AHC245QDWRG4Q1 from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction-control input: logic low transfers data from the B bus to the A bus, and logic high transfers data from the A bus to the B bus. |
| 2 | A1 | bidirectional | A-bus channel 1 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 3 | A2 | bidirectional | A-bus channel 2 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 4 | A3 | bidirectional | A-bus channel 3 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 5 | A4 | bidirectional | A-bus channel 4 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 6 | A5 | bidirectional | A-bus channel 5 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 7 | A6 | bidirectional | A-bus channel 6 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 8 | A7 | bidirectional | A-bus channel 7 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 9 | A8 | bidirectional | A-bus channel 8 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 10 | GND | power_in | Device ground reference. |
| 11 | B8 | bidirectional | B-bus channel 8 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 12 | B7 | bidirectional | B-bus channel 7 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 13 | B6 | bidirectional | B-bus channel 6 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 14 | B5 | bidirectional | B-bus channel 5 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 15 | B4 | bidirectional | B-bus channel 4 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 16 | B3 | bidirectional | B-bus channel 3 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 17 | B2 | bidirectional | B-bus channel 2 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 18 | B1 | bidirectional | B-bus channel 1 3-state input/output; direction is set by DIR and the channel is high-impedance when OE is high. |
| 19 | OE | input | Output-enable input; when high the device is disabled so the A and B buses are isolated, and it should be tied to VCC through a pullup resistor to hold the high-impedance state during power up or power down. |
| 20 | VCC | power_in | Supply voltage, operating range 2 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74AHC245QDWRG4Q1 - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
sn74ahc245qdwrg4q1-etched.step/sn74ahc245qdwrg4q1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ahc245qdwrg4q1.step/sn74ahc245qdwrg4q1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (17 pp, sha256
2984f9f0efcb7078, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).