component
1XXD26000MAA
Public Made by Adomby adom
KDS Daishinku Temperature Compensated Crystal Oscillators (TCXOs), SMD2016-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown1XXD26000MAA
KDS Daishinku · Temperature Compensated Crystal Oscillators (TCXOs) · SMD2016-4P
1XXD26000MAA from KDS Daishinku, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin listed as GND in the pin connection table; the datasheet gives no separate electrical limit for this pin. |
| 2 | GND | power_in | Ground pin listed as GND in the pin connection table; the datasheet gives no separate electrical limit for this pin. |
| 3 | Output | output | Clipped sine wave output (DC-coupled) with a minimum output level of 0.8 VP-P into the specified load of 10 kΩ // 10 pF, with 40/60 to 60/40 % symmetry. |
| 4 | VCC | power_in | Supply voltage input; the absolute maximum rating is -0.3 to +4.6 V, and recommended operation is at 1.8 V ±5%, 2.2 V ±5% or 2.8 V ±5% (1.71-1.89 V, 2.09-2.31 V or 2.66-2.94 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | KDS Daishinku |
| Package | SMD2016-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (1.8 V range) | VCC | 1.71 | 1.8 | 1.89 | V | 2 | |
| Supply Voltage (2.2 V range) | VCC | 2.09 | 2.2 | 2.31 | V | 2 | |
| Supply Voltage (2.8 V range) | VCC | 2.66 | 2.8 | 2.94 | V | 2 | |
| Load Impedance (resistance part) | LOAD_R | 9 | 10 | 11 | kΩ | 2 | |
| Load Impedance (parallel capacitance) | LOAD_C | 9 | 10 | 11 | pF | 2 | |
| Operating Temperature Range | T_OPR | -40 | 85 | C | 2 | ||
| Supply Voltage (absolute maximum) | VCC | -0.3 | 4.6 | V | 2 | ||
| Storage Temperature Range | T_STG | -40 | 85 | C | 2 | ||
| Current Consumption | 1.5 | mA | 2 | ||||
| Output Level | VP-P | 0.8 | VP-P | Note 1: clipped sine wave (DC-coupled) | 2 | ||
| Symmetry | 40 | 60 | % | GND level (DC cut) | 2 | ||
| Frequency Stability, Tolerance after 2 times reflow | -1.5 | 1.5 | ppm | After 2 times reflow; ref. to nominal frequency (note 2, 3) | 2 | ||
| Frequency Stability vs Temperature | -0.5 | 0.5 | ppm | TA=-30~+85C | 2 | ||
| Frequency Stability vs Temperature | -1 | 1 | ppm | TA=-40~-30C | 2 | ||
| Frequency Stability vs Drift Rate/Slope | -10 | 10 | ppb/s | @ 0.3C/s | 2 | ||
| Frequency Stability vs Hysteresis | -0.6 | 0.6 | ppm | 2 | |||
| Frequency Stability vs Supply Voltage | -0.1 | 0.1 | ppm | VCC=+1.8V±5%,+2.2V±5%,+2.8V±5% | 2 | ||
| Frequency Stability vs Load Variation | -0.1 | 0.1 | ppm | LOAD_R//C=(10kΩ//10pF)±10% | 2 | ||
| Frequency Stability vs Aging (1 year) | -1 | 1 | ppm/year | TA=Room ambient | 2 | ||
| Frequency Stability vs Aging (2 years) | -1.5 | 1.5 | ppm/2years | TA=Room ambient | 2 | ||
| Frequency Stability vs Aging (5 years) | -2.5 | 2.5 | ppm/5years | TA=Room ambient | 2 | ||
| Frequency Stability vs Aging (10 years) | -5 | 5 | ppm/10years | TA=Room ambient | 2 | ||
| G Sensitivity | -2 | 2 | ppb/G | Gamma Vector of all 3 axes from 30 to 1500Hz | 2 | ||
| Start Up Time | 2 | ms | @90% of final VOUT level | 2 | |||
| SSB Phase Noise at offset 1Hz | -50 | dBc/Hz | Relative to f0 level, offset 1Hz | 2 | |||
| SSB Phase Noise at offset 5Hz | -73 | dBc/Hz | Relative to f0 level, offset 5Hz | 2 | |||
| SSB Phase Noise at offset 10Hz | -80 | dBc/Hz | Relative to f0 level, offset 10Hz | 2 | |||
| SSB Phase Noise at offset 100Hz | -106 | dBc/Hz | Relative to f0 level, offset 100Hz | 2 | |||
| SSB Phase Noise at offset 1kHz | -134 | dBc/Hz | Relative to f0 level, offset 1kHz | 2 | |||
| SSB Phase Noise at offset 10kHz | -144 | dBc/Hz | Relative to f0 level, offset 10kHz | 2 | |||
| SSB Phase Noise at offset 100kHz | -152 | dBc/Hz | Relative to f0 level, offset 100kHz | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PET | Cover Tape : PET + Olefin Resin (Conductivity) | 8 | |
| contacts | silver | Leads, such as solder, are not used for this product. (Lead Free) 17.6 About the existence of silver and mercury use | 13 |
CAD (KiCad official)
- Symbol:
1XXD26000MAA - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
1xxd26000maa-etched.step/1xxd26000maa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);1xxd26000maa.step/1xxd26000maa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: KDS Daishinku datasheet (14 pp, sha256
c0b212eb2ec656be, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).