Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74CBTLV3257PWG4

Texas Instruments · Signal Switches, Multiplexers, Decoders · TSSOP-16

SN74CBTLV3257PWG4 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Select input that sets the channel path: with OE low, S low connects A to B1 and S high connects A to B2.
2 1B1 bidirectional Channel 1 input/output 1, a FET switch port connected to 1A when S is low and OE is low.
3 1B2 bidirectional Channel 1 input/output 2, a FET switch port connected to 1A when S is high and OE is low.
4 1A bidirectional Channel 1 common output/input port, with 5 Ω typical on-state switch resistance to the B ports.
5 2B1 bidirectional Channel 2 input/output 1, a FET switch port connected to 2A when S is low and OE is low.
6 2B2 bidirectional Channel 2 input/output 2, a FET switch port connected to 2A when S is high and OE is low.
7 2A bidirectional Channel 2 common output/input port, with 5 Ω typical on-state switch resistance to the B ports.
8 GND power_in Ground reference for the device.
9 3A bidirectional Channel 3 common output/input port, with 5 Ω typical on-state switch resistance to the B ports.
10 3B2 bidirectional Channel 3 input/output 2, a FET switch port connected to 3A when S is high and OE is low.
11 3B1 bidirectional Channel 3 input/output 1, a FET switch port connected to 3A when S is low and OE is low.
12 4A bidirectional Channel 4 common output/input port, with 5 Ω typical on-state switch resistance to the B ports.
13 4B2 bidirectional Channel 4 input/output 2, a FET switch port connected to 4A when S is high and OE is low.
14 4B1 bidirectional Channel 4 input/output 1, a FET switch port connected to 4A when S is low and OE is low.
15 OE input Active-low output enable; when high, all switches are disabled, and it must be pulled up to VCC through a resistor to hold high impedance during power up or down.
16 VCC power_in Supply voltage, recommended operating range 2.3 V to 3.6 V, with a 0.1 µF bypass capacitor recommended close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Logic
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VCC -0.5 4.6 V 5
Input voltage (absolute maximum) VI -0.5 4.6 V 5
Continuous channel current 128 mA 5
Input clamp current IIK -50 mA VI/O < 0 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage (recommended) VCC 2.3 3.6 V 6
High-level control input voltage VIH 1.7 V VCC = 2.3V to 2.7V 6
High-level control input voltage VIH 2 V VCC = 2.7V to 3.6V 6
Low-level control input voltage VIL 0.7 V VCC = 2.3V to 2.7V 6
Low-level control input voltage VIL 0.8 V VCC = 2.7V to 3.6V 6
Operating free-air temperature TA -40 85 °C PKG = RGY、DBQ、D、PW、DGV 6
Input clamp voltage VIK -1.2 V VCC = 3V, II = -18 mA 6
Input leakage current II -1 1 µA VCC = 3.6V, VI = VCC or GND 6
Power-off leakage current Ioff 15 µA VCC = 0, VI or VO = 0V to 3.6V 6
Supply current ICC 10 µA VCC = 3.6V, IO = 0, VI = VCC or GND 6
Additional supply current per control input ΔICC 300 µA VCC = 3.6V, one input at 3V, other inputs at VCC or GND 6
On-state resistance ron 5 8 Ω VCC = 2.3V (typ at VCC = 2.5V), VI = 0, II = 64 mA 6
On-state resistance ron 27 40 Ω VCC = 2.3V (typ at VCC = 2.5V), VI = 1.7V, II = 15 mA 6
On-state resistance ron 5 7 Ω VCC = 3V, VI = 0, II = 64 mA 6
On-state resistance ron 10 15 Ω VCC = 3V, VI = 2.4V, II = 15 mA 6
Control input capacitance Ci 3 pF VI = 3V or 0V 6
Off-state input/output capacitance, A port Cio(OFF) 10.5 pF VO = 3V or 0V, OE = VCC 6
Off-state input/output capacitance, B port Cio(OFF) 5.5 pF VO = 3V or 0V, OE = VCC 6
Junction-to-ambient thermal resistance RθJA 129.1 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 67 °C/W 5
Junction-to-board thermal resistance RθJB 87.1 °C/W 5
Junction-to-top characterization parameter ψJT 14.5 °C/W 5
Junction-to-board characterization parameter ψJB 86.3 °C/W 5

CAD (KiCad official)

  • Symbol: SN74CBTLV3257PWG4
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: sn74cbtlv3257pwg4-etched.step / sn74cbtlv3257pwg4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74cbtlv3257pwg4.step / sn74cbtlv3257pwg4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 755a18435f118f44, retrieved 2026-11-10, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF