3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNB6L14MNG
onsemi · Buffer/Driver/Transceiver · QFN-16(3x3)
NB6L14MNG from onsemi, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Q1 | output | Non-inverted differential LVPECL output, typically terminated with a 50 ohm resistor to VCC-2.0 V. |
| 2 | /Q1 | output | Inverted differential LVPECL output, typically terminated with a 50 ohm resistor to VCC-2.0 V. |
| 3 | Q2 | output | Non-inverted differential LVPECL output, typically terminated with a 50 ohm resistor to VCC-2.0 V. |
| 4 | /Q2 | output | Inverted differential LVPECL output, typically terminated with a 50 ohm resistor to VCC-2.0 V. |
| 5 | Q3 | output | Non-inverted differential LVPECL output, typically terminated with a 50 ohm resistor to VCC-2.0 V. |
| 6 | /Q3 | output | Inverted differential LVPECL output, typically terminated with a 50 ohm resistor to VCC-2.0 V. |
| 7 | VCC | power_in | Positive supply voltage; VCC = 2.375 V to 3.63 V with GND = 0 V in LVPECL mode. |
| 8 | EN | input | LVTTL/LVCMOS synchronous output enable; when LOW, Q outputs go LOW and /Q outputs go HIGH on the next negative transition of IN, and it has an internal pullup that defaults HIGH when left open. |
| 9 | /IN | input | Inverted differential clock input with an internal 50 ohm resistor to termination pin VT, accepting LVPECL, CML, LVDS or HSTL levels. |
| 10 | VREF_AC | output | Output voltage reference for rebiasing capacitor-coupled inputs only. |
| 11 | VT | passive | Internal 100 ohm center-tapped termination pin for IN and /IN; leaving it open with no input signal makes the device susceptible to self-oscillation in differential configuration. |
| 12 | IN | input | Non-inverted differential clock input with an internal 50 ohm resistor to termination pin VT, accepting LVPECL, CML, LVDS or HSTL levels. |
| 13 | GND | power_in | Negative supply voltage, 0 V reference for the device. |
| 14 | VCC | power_in | Positive supply voltage; VCC = 2.375 V to 3.63 V with GND = 0 V in LVPECL mode. |
| 15 | Q0 | output | Non-inverted differential LVPECL output, typically terminated with a 50 ohm resistor to VCC-2.0 V. |
| 16 | /Q0 | output | Inverted differential LVPECL output, typically terminated with a 50 ohm resistor to VCC-2.0 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-16(3x3) |
| Category | Logic ICs |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
NB6L14MNG - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
nb6l14mng-etched.step/nb6l14mng-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nb6l14mng.step/nb6l14mng.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (11 pp, sha256
82c3e1214386b91c, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).