component

TVP5150AM1PBS

Public Made by Adom

by adom

Texas Instruments Video Interface ICs, TQFP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterfacetvp5150am1pbsfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TVP5150AM1PBS

Texas Instruments · Video Interface ICs · TQFP-32(5x5)

TVP5150AM1PBS from Texas Instruments, in a TQFP-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AIP1A input Analog video input with 0-0.75 VPP maximum range, ac-coupled via 0.1-µF capacitor.
2 AIP1B input Analog video input with 0-0.75 VPP maximum range, ac-coupled via 0.1-µF capacitor.
3 PLL_AGND power_in Phase-locked loop analog ground reference.
4 PLL_AVDD power_in Phase-locked loop 1.8-V analog supply.
5 XTAL1/OSC input External clock reference input for crystal oscillator.
6 XTAL2 output External clock reference output; not connected when XTAL1 driven by external oscillator.
7 AGND power_in Substrate analog ground reference.
8 RESETB input Active-low asynchronous reset; resets registers and restarts microprocessor when pulled low.
9 SCLK output System clock output at 2× the video pixel clock frequency.
10 IO_DVDD power_in 3.3-V digital output supply.
11 YOUT7/I2CSEL output MSB of ITU-R BT.656/YCbCr 4:2:2 video output; I2CSEL address select input sampled during reset with external pullup or pulldown resistor (>1 kΩ).
12 YOUT6 output Bit 6 of ITU-R BT.656/YCbCr 4:2:2 video output.
13 YOUT5 output Bit 5 of ITU-R BT.656/YCbCr 4:2:2 video output.
14 YOUT4 output Bit 4 of ITU-R BT.656/YCbCr 4:2:2 video output.
15 YOUT3 output Bit 3 of ITU-R BT.656/YCbCr 4:2:2 video output.
16 YOUT2 output Bit 2 of ITU-R BT.656/YCbCr 4:2:2 video output.
17 YOUT1 output Bit 1 of ITU-R BT.656/YCbCr 4:2:2 video output.
18 YOUT0 output LSB of ITU-R BT.656/YCbCr 4:2:2 video output.
19 DGND power_in Digital ground reference.
20 DVDD power_in 1.8-V digital supply.
21 SCL bidirectional I2C serial clock input/output with open-drain drive.
22 SDA bidirectional I2C serial data input/output with open-drain drive.
23 FID/GLCO output Field ID/vertical lock indicator output or genlock serial output at SCLK rate in Genlock mode, SCLK/4 in RTC mode.
24 VSYNC/PALI output Vertical synchronization signal or PAL line indicator output (1=noninverted, 0=inverted).
25 HSYNC output Horizontal synchronization output.
26 AVID output Active video indicator output, high during horizontal active time; toggling during vertical blanking controlled by register 12h bit 2.
27 INTREQ/GPCL/VBLK output Programmable output for interrupt request, general-purpose control logic, or vertical blanking indication; requires external 10-kΩ pulldown when disabled.
28 PDN input Active-low power-down input; places decoder in standby mode with <1 mW consumption while preserving register values.
29 REFP output ADC reference positive output; connect through 1-µF capacitor to ground.
30 REFM output ADC reference negative output; connect through 1-µF capacitor to ground and 1-µF capacitor to REFP.
31 CH_AGND power_in Composite video channel analog ground.
32 CH_AVDD power_in Composite video channel 1.8-V analog supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TQFP-32(5x5)
Category Interface
Pins 32

CAD (KiCad official)

  • Symbol: TVP5150AM1PBS
  • Footprint: Package_QFP:TQFP-32_5x5mm_P0.5mm
  • 3D model: TQFP-32(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm nominal TQFP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tvp5150am1pbs-etched.step / tvp5150am1pbs-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tvp5150am1pbs.step / tvp5150am1pbs.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (87 pp, sha256 0d57650c898dc79c, retrieved 2026-10-06, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF