component
GR8313JG
Public Made by Adomby adom
Grenergy Battery Management ICs, DIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownGR8313JG
Grenergy · Battery Management ICs · DIP-8
GR8313JG from Grenergy, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGI | input | Power good input signal pin with three threshold levels for monitoring: below 0.63V (low), 0.63V-1.3V (mid), and above 1.3V (high). |
| 2 | GND | power_in | Ground pin (power return). |
| 3 | FPO/ | tri_state | Inverted fault protection output with open-drain stage, delivering 0.35V low-level output at 10mA sink current. |
| 4 | PSON/ | input | Remote ON/OFF control input with 38ms debounce time, high-level threshold of 1.5V and low-level threshold of 1.1V. |
| 5 | VS33 | input | 3.3V supply monitoring input for over/under-voltage protection with over-voltage threshold of 3.9V (typical) and under-voltage threshold of 2.2V (typical). |
| 6 | VS5 | input | 5.0V supply monitoring input for over/under-voltage protection with over-voltage threshold of 6.1V (typical) and under-voltage threshold of 3.5V (typical). |
| 7 | VCC | power_in | Power supply pin with operating voltage range of 4.0V to 16.0V and typical supply current of 3mA at VPSON/ = 5V. |
| 8 | PGO | tri_state | Power good output signal pin with open-drain stage, delivering 0.35V low-level output at 10mA sink current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Grenergy |
| Package | DIP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
GR8313JG - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
gr8313jg-etched.step/gr8313jg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gr8313jg.step/gr8313jg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Grenergy datasheet (10 pp, sha256
26a36054a67785af, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).