component
COSTS3USB30E
Public Made by Adomby adom
COSINE Analog Switches, Multiplexers, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCOSTS3USB30E
COSINE · Analog Switches, Multiplexers · MSOP-10
COSTS3USB30E from COSINE, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Select input that sets the DPDT path per the truth table; digital input thresholds are VIH 2.4 V min and VIL 0.8 V max. |
| 2 | D1+ | bidirectional | USB signal path port 1 (positive); analog signal range is 0 V to VCC and the switch conducts equally well in both directions when on. |
| 3 | D2+ | bidirectional | USB signal path port 2 (positive); analog signal range is 0 V to VCC and the switch conducts equally well in both directions when on. |
| 4 | D+ | bidirectional | Common USB signal path (positive) that connects to D1+ or D2+ depending on S, with rail-to-rail operation up to VCC. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | D- | bidirectional | Common USB signal path (negative) that connects to D1- or D2- depending on S, with rail-to-rail operation up to VCC. |
| 7 | D2- | bidirectional | USB signal path port 2 (negative); analog signal range is 0 V to VCC and the switch conducts equally well in both directions when on. |
| 8 | D1- | bidirectional | USB signal path port 1 (negative); analog signal range is 0 V to VCC and the switch conducts equally well in both directions when on. |
| 9 | OE | input | Output enable input; when driven high both switch paths are set OFF (high impedance) per the truth table, with the same VIH 2.4 V min and VIL 0.8 V max logic levels as S. |
| 10 | VCC | power_in | Power supply, 1.8 V to 5.5 V single supply per recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | MSOP-10 |
| Category | Interface |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog signal range | VIS | 0 | V | 4 | |||
| On-state resistance | Ron | 6 | 10 | Ω | VCC=3V, VIS =0.4V, ID = -8mA, Switch On, See Figure 1 | 4 | |
| Power OFF leakage current | IOFF | -1 | 1 | μA | VCC=0V, VIS = 0V to 3.6V, VS or VOE = 0V or 3.6V, See Figure 2 | 4 | |
| OFF-state leakage current (D+, D-) | IOZ | -1 | 1 | μA | VCC=3.6V, VD = 0V to 3.6V, VIS= 0V to 3.6V, Switch OFF, See Figure 2 | 4 | |
| Channel ON leakage current | ID(OFF) | -1 | 1 | μA | VCC=3.6V, VD = 0V to 3.6V, VIS= 0V to 3.6V or floating, Switch ON, See Figure 3 | 4 | |
| Input logic high | VIH | 2.4 | 5.5 | V | 4 | ||
| Input logic low | VIL | 0 | 0.8 | V | 4 | ||
| Input leakage current | IIH, IIL | -1 | 1 | μA | VIN = 0 or 5.5 | 4 | |
| VCC supply range | VCC | 1.8 | 5.5 | V | 5 | ||
| VCC supply current | ICC | 1 | μA | VCC=4.3V, II/O = 0, Switch ON or OFF | 5 | ||
| Supply voltage range | VCC | -0.5 | 6 | V | 3 | ||
| Analog voltage range | VIO | -0.5 | V | 3 | |||
| Digital input voltage range | VIN | -0.5 | 6 | V | 3 | ||
| Continuous current into any terminal | -50 | 50 | mA | 3 | |||
| Peak current into any terminal | -100 | 100 | mA | 3 | |||
| Operating junction temperature | -40 | 125 | °C | 3 | |||
| Storage temperature | -55 | 150 | °C | 3 | |||
| VCC | VCC | 1.8 | 5.5 | V | 3 | ||
| VIO | VIO | 0 | V | 3 | |||
| VIN | VIN | 0 | 3 | ||||
| Operating free-air temperature | TA | -40 | 85 | °C | 3 | ||
| On-state resistance match between channels | ΔRon | 0.35 | Ω | 4 | |||
| On-state resistance flatness | Ron(flat) | 2 | Ω | VCC=3V, VIS =0V to 1V, ID = -8mA, Switch On, See Figure 1 | 4 | ||
| Increase in ICC per control voltage | ΔICC | 10 | μA | VCC=4.3V, VIN =2.6V | 4 | ||
| Turn-on time | tON | 15 | ns | VIS = 0.8V, RL=50Ω, CL = 5pF, See Figure 5 | 4 | ||
| Turn-off time | tOFF | 6 | ns | 4 | |||
| Propagation delay | tD | 0.3 | ns | RL=50Ω, CL = 5pF | 4 | ||
| Break-before-make delay | tBBM | 4 | ns | VIS = 0.8V, RL=50Ω, CL = 5pF, See Figure 6 | 4 | ||
| Charge injection | Q | 10 | pC | VGEN =0V, RGEN=0, CL = 1 nF, See Figure 10 | 4 | ||
| OFF-state capacitance | CI/O(OFF) | 5 | pF | VCC = 3.3V，VI/O = VCC or 0, Switch OFF, See Figure 4 | 4 | ||
| ON-state capacitance | CI/O(ON) | 10 | pF | VCC = 3.3V，VI/O = VCC or 0, Switch ON, See Figure 4 | 4 | ||
| Digital input capacitance | CI | 1 | pF | VCC = 0V，VIN = VCC or 0, See Figure 4 | 4 | ||
| OFF-isolation | VISO | -40 | dB | RL = 50Ω, CL = 5pF, VI/O = 1VRMS, f = 1MHz, Switch OFF, See Figure 8 | 5 | ||
| Crosstalk | XTALK | -60 | dB | RL = 50Ω, CL = 5pF, VI/O = 1VRMS, f = 1MHz, Switch ON, See Figure 9 | 5 | ||
| Bandwidth | BW | 900 | MHz | RL = 50Ω, CL = 5pF, VI/O = 1VRMS, f = 1MHz, Switch ON, See Figure 7 | 5 | ||
| Package thermal resistance, junction-to-ambient | RθJA | 160 | °C/W | MSOP10 package | 3 |
CAD (KiCad official)
- Symbol:
COSTS3USB30E - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
costs3usb30e-etched.step/costs3usb30e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);costs3usb30e.step/costs3usb30e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: COSINE datasheet (9 pp, sha256
056f33b25b298b83, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).