Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

0603WAF0000T5E

UNI-ROYAL(Uniroyal Elec) · Chip Resistor - Surface Mount · 0603

0603WAF0000T5E from UNI-ROYAL(Uniroyal Elec), in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of a 0 Ohm jumper chip resistor (0603; <50 mOhm, rated current 1 A, max overload 2 A per the sheet's jumper ratings); unpolarised, either orientation.
2 2 passive Terminal 2 of a 0 Ohm jumper chip resistor (0603; <50 mOhm, rated current 1 A, max overload 2 A per the sheet's jumper ratings); unpolarised, either orientation.

Key specifications

Parameter Value
Manufacturer UNI-ROYAL(Uniroyal Elec)
Package 0603
Category Resistors
Pins 2

Electrical characteristics

Limits from the LCSC catalog entry for this part (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resistance 0 Ω nominal, catalog attribute (LCSC C21189) catalog
Tolerance -1 1 % catalog attribute (LCSC C21189) catalog
Rated power 100 mW catalog attribute (LCSC C21189) catalog
Operating temperature -55 155 °C catalog description (LCSC C21189) catalog

CAD (Adom-generated)

  • Symbol: 0603WAF0000T5E
  • Footprint: Adom_Gen:UNI-ROYAL_Uniroyal_Elec__0603_8c6b04
  • 3D model: generated to fit the land (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UNI-ROYAL(Uniroyal Elec) datasheet (9 pp, sha256 d20b4e5f35745009, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: UNI-ROYAL V.9 '11.3 Soldering pad size recommended' (p.8), 0603: A 0.9±0.05 (gap between pads), B 0.65±0.05 (pad length), C 0.8±0.05 (pad width), D 2.1±0.05 (overall); letters fixed by the drawing. The nominals do not close (0.9 + 2 x 0.65 = 2.2 vs D 2.1), so gap A 0.90 and overall D 2.10 are kept and B = 0.60, the low end of its printed 0.65±0.05: every printed value is within its tolerance. Pads 0.60 x 0.80 at x +/-0.75.

Datasheet PDF