component
MG6001T5-AJ
Public Made by Adomby adom
Megain Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMG6001T5-AJ
Megain · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
MG6001T5-AJ from Megain, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin; recommended input range is 7 V to 100 V, with an absolute maximum of -0.3 V to +110 V. |
| 2 | GND | power_in | Ground pin for the regulator. |
| 3 | EN | input | Enable pin compatible with standard CMOS logic that turns the regulator on (VEN ≥ 1.5 V) or enables low-current shutdown (VEN ≤ 0.4 V); recommended range 0 to 100 V and absolute maximum -0.3 to +110 V. |
| 4 | FB | input | Feedback pin that sets the output voltage via VOUT = 0.8 V × (R1+R2)/R2; absolute maximum range is -0.3 V to 5.5 V. |
| 5 | VOUT | power_out | Regulated output voltage pin; recommended output range is 1.2 V to 50 V, with an absolute maximum of -0.3 V to +60 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Megain |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN input voltage (absolute maximum) | VIN | -0.3 | 110 | V | 3 | ||
| VOUT output voltage (absolute maximum) | VOUT | -0.3 | 60 | V | 3 | ||
| VFB feedback voltage (absolute maximum) | VFB | -0.3 | 5.5 | V | 3 | ||
| VEN enable voltage (absolute maximum) | VEN | -0.3 | 110 | V | 3 | ||
| Junction temperature (absolute maximum) | TJ | 150 | ℃ | 3 | |||
| Power dissipation (absolute maximum) | PD | 0.29 | W | SOT23-5 package | 3 | ||
| Soldering temperature (absolute maximum) | 300 | ℃ | soldering time ≤10 s | 3 | |||
| Storage temperature | Tstg | -65 | 150 | ℃ | 3 | ||
| Input voltage (recommended operating) | VIN | 7 | 100 | V | 3 | ||
| Output voltage (recommended operating) | VOUT | 1.2 | 50 | V | 3 | ||
| Enable voltage (recommended operating) | VEN | 0 | 100 | V | 3 | ||
| Output current (recommended operating) | IOUT | 0 | 50 | mA | 3 | ||
| Junction temperature range (recommended operating) | TJ | -40 | 125 | ℃ | 3 | ||
| Output voltage accuracy | -1.5 | 1.5 | % | over full temperature range (product feature and ordering table ±1.5%) | 1 | ||
| Input voltage | VIN | 7 | 100 | V | 3 | ||
| Internal reference voltage | VREF | 0.788 | 0.8 | 0.812 | V | 3 | |
| Line regulation | ΔVLINE | 3 | 20 | mV | VIN = 7V ~100V | 3 | |
| Load regulation | ΔVLOAD | 0.4 | % | 100uA<IOUT<50mA | 3 | ||
| Dropout voltage | VDROP | 1 | V | IOUT = 20mA | 3 | ||
| Dropout voltage | VDROP | 3 | V | IOUT = 50mA | 3 | ||
| Quiescent current (静态电流) | IQ | 23 | 40 | uA | IOUT = 0mA, current through external feedback resistors R1, R2 excluded | 4 | |
| Shutdown current (关断电流) | ISD | 8 | 15 | uA | VEN = 0V | 4 | |
| 关断电流 (current limit row, printed label) | ICL | 55 | 120 | mA | VOUT = 90% VOUT(NOM) | 4 | |
| Enable high-level voltage | VENHI | 1.5 | V | 4 | |||
| Enable low-level voltage | VENLO | 0 | 0.4 | V | 4 | ||
| Enable pin current | IEN | 0.02 | 1 | uA | 7V<VIN<100V, VIN=VEN | 4 | |
| Feedback pin current | IFB | 0.01 | 0.11 | uA | 4 | ||
| Power supply rejection ratio | PSRR | 85 | dB | @1 kHz (ordering table) | 1 | ||
| Thermal shutdown threshold (rising) | TSD | 150 | ℃ | shutdown, temperature rising | 4 | ||
| Thermal shutdown reset threshold (falling) | TSD | 130 | ℃ | reset, temperature falling | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 350 | ⁰C/W | SOT23-5 package; TA=25°C, JEDEC 51-7 high-effective-conductivity four-layer board | 3 |
CAD (KiCad official)
- Symbol:
MG6001T5-AJ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mg6001t5-aj-etched.step/mg6001t5-aj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mg6001t5-aj.step/mg6001t5-aj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Megain datasheet (7 pp, sha256
ac69621edce57860, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).